Garden Irrigation System,50ft 3/8" & 50ft 1/4" Irrigation System Blank Distribution Tubing Watering Drip Kit/Irrigation Kits Automatic Mist Irrigation Equipment Set for Garden,Flower Bed,Lawn

This was a great find. Everything works as advertised, minus 1 sprinkler head that won't adjust down in pressure. Not a big deal: I just put that one on a particularly thirsty plant. I didn't have too much trouble putting it together, and plan to buy another when I expand my garden.

The two sizes of tubing (1/4 and 3/8 inches) are perfect of the garden areas that I wanted to irrigate in the yard. The joints that connect from 3/8 to 1/4 tubing have really good fit and easy to install. One major complaint is the quick connector. It is really flimsy and none of the connector attachments are made for the standard 3/4 inch hose/spigot common in the US... Luckily, I had a 5/8 inch garden hose fitting to 3/4 female, which I inserted into the rubber universal connector that came in the kit....

Having quite a lot of experience playing with drip systems for 30+ years ..... This is the genius product that addresses every short coming of the standard drip system you get at all the big irrigation manufacturers. Waterproof, No leaking, adjustable if you want to change the position of spigots, flexible tubing, complete, thoughtful. I wish I ran into this years ago.

The 1/2" tubing is 3/8". Don't expect to be able to combine this with an existing system or tubing from your local home center. As a stand alone kit, the "1/2 inch" kit that comes with "1/4 inch (more likely 6mm)" emitter tubing is actually very good. The tubing is pretty good quality as far as I can tell and the quick connect hose adapter works well and is leak free.

Great product , I am a repeat purchaser, I use it for flower beads and my garden. Precision watering at its best and its quick and easy to install

Good price and they work.Two complaints:1) Sometimes the 1/4" barbs don't hold so I had to use wire-tires to hold hose on.2) There's no 3/8" TEE so, if you want to run it in two different directions, you have to make a trip to Home Depot.

This product kit is fairly complete and comes with vvarious drip emmiters and tubing. To make a connection between tubing and drip heads, the tubing must be softened with a dip for a minute or two in hot water. A presure reducer should be considered to avoid busted water connections / depending on line pressure at the hose bib.

Very disappointed. This is not the standard size 1/2 inch drip tubing and in fact is black rubber tubing. The 1/4 inch rubber tubing is very thin and with little pressure expands and comes off the emitters. They also didn't send a 100 foot line of 1/2 tubing and instead a 50 foot line of 1/2 tubing. This will not hold up in the sun due to the very thin rubbery line. Recommend using rainbird drip line that you dont need to cut the line to add emitters instead place a 1/4 coupler to 1/4 inch line then emitter.