Tonno Pro Lo Roll, Soft Roll-up Truck Bed Tonneau Cover | LR-2055 | Fits 2019 - 2023 Dodge Ram 1500, w/o Multifunction tailgate 5' 7" Bed (67.4")

Decided to go with a roll up because the vinyl folders never look good and the hard ones cost a lot, and this vehicle is in a lease not owned yet. I am concerned about snow in the future, but the price was right so I took my chance with a roll up. The low profile looks good on my ram warlock. The only water I have seen get in so far was under a really heavy downpour and it was in the front corners by the cab where there is a gap between my bed rail covers and the cover from my duoliner on the rail behind the cab, which allows just a small bit of water to get in if it blows hard enough at the right angle, which is easily drained from the bed via the normal drainage. Also water was getting in from the rear stake holes until I put covers on them (no it the fault of this cover). I am amazed how well the tailgate seals to the cover even though it doesn't look like it should work as well as it does. Rolling the cover is easy and the latch is one handed on the driver side. Install took a little time because I did it solo and was trying to get it to sit just how I wanted. My only issues are so minor I won't deduct a star, and that is the lack of an automatic flush mounting on the frame, so it doesn't sit on the bed side edge but is fully inside it and held up only by clamps which makes it a little harder to install straight and may lead to future adjustments being needed. Also the foam pieces on the front and back ends of the rails need to be a bit larger so they sit better and provide a better seal. The support bars on the vinyl are light weight aluminum but are held in place with simple Velcro style strips, so if they become bent in heavy snow then it may be simple to swap them out with some steel bars of the same diameter. Long story short, so far this cover is great. I hope it survives the heavy snow in winter, but for the price I paid and with the warranty on the vinyl cover itself, it won't be the end of the world if I have to fix or replace later

I got this for my 2012 Ram 1500 Quad cab. I originally thought that having a tonneau cover would be too much of a hassle to remove/replace every time I needed the bed space. My tonneau cover experience consists of one of those roll-up/velcro ones, which was a pain to unroll and roll/snap back into place. I also had a hard fiberglass top which I found to be useless since it eliminated so much cargo space functionality. It looked nice but I couldn't even put a kitchen stove in the bed of my truck. The Tonnopro took me less than 10 minutes to install. No mounting hardware, no drilling, no tools. Installation was incredibly simple (I prepared by watching a YouTube video from Tonnopro first). The trifold ability of this tonneau cover is great. In the weeks that I have owned it there have been many times that I have needed it out of my way (hauling a refrigerator, long lumber, party tent etc...) and people seem impressed when I fold it up and buckle it down out of the way in less than a minute. I bought this product with little expectation, simply based on the low price. How could something this inexpensive be such a great product when there are similar products online selling for twice as much? I will tell you now that this cover offers everything that I could want out of it (durability, functionality, bed protection, better gas mileage, appearance...) so paying more money for the same thing in a different product doesn't make any sense. I will definitely buy this product again in the future. If you are on the fence, put it in your cart right now and hit order. You won't be disappointed. Just make sure you order the right model for your truck. I made sure to check the Tonnopro website for the correct model.

I bought a soft roll Tonno Pro cover for one of my trucks going on two years ago and it has held up great so when I needed one for another truck (Long bed Ram dually) I decided to try another one. I installed it yesterday and just like the first one, it was super easy to install and looks and fits great! Great product for a great price!

After researching and looking at numerous tonneau covers, I chose the Tonno Pro Hard Fold for my 2015 Ram 1500 Sport because it seemed to have all the features I wanted at half the price of many others. It was delivered in 5 days, packed very well with absolutely no damage and contained everything it was supposed to. Install took 15 minutes,at most,with a friend's help. Would've been 25 if I had done it myself. Could do it in 10 minutes myself now that I have done it. Watching some installation videos prior to delivery definitely helped. Getting the adjustment on the tailgate fit was what took the longest but the whole cover fits nice and snug. I installed it yesterday and it rained overnight and most of the day today while I drove around on both the freeway and side roads. I specifically did not open the tailgate until very late today because I wanted it to get a good soaking. Nice and dry inside ! There was a few drips where the tailgate meets the bed but the included weather seal tape , which I have not installed yet, should eliminate that. The cover looks great on my truck too, with a nice seamless appearance and I like the security with the tailgate locked. Can't go 5 stars because I've only had it 2 days and time will tell on endurance and increased gas mileage but very happy so far. American made with a limited lifetime warranty on the frame,10 year warranty on the vinyl, plus the reasonable price, I don't expect that to change. UPDATE. Have had this cover on my truck for 2 years now and still love it! It keeps the bed nice and dry and still looks really good. I live in Tacoma, WA where it rains sometimes every day, especially in the winter and no issues. Have removed it and put it back on several times and very simple to do. Didn't have any problems with reseating it either. You will be very happy with this cover!!

Vehicle: 2013 Ram 1500 Quad cab with 6.4' bed (long) I was looking for a low-profile cover for my truck, but I didn't want to spend 500+ on a Truxedo. A soft roll-top was a must, because I do use my bed frequently for hauling large items. Installation was simple. The clamps aren't the most amazing peices of hardware, but if you take your time you won't strip out the aluminum. You need a couple spring clamps and a socket. I did it myself, at night, in the cold. It took all of maybe 30 minutes. The most difficult part was the final latch. Close it from the drivers side, not the passenger's side where the latch is. Doesn't make sense I know, but it snaps in like a charm if you do it that way. It looks great. It doesn't sit on the rails, and doesn't stick up an inch. It's slightly higher than the bed rails, maybe 1/4 inch. When driving there is not excessive flap. Yeah, it moves, but any soft cover is going to have some movement. It isn't 100% watertight, but i didn't expect it to be. If I take it through a high pressure wash, there is going to be some water in the bed. Not a lot, but there is a bit. Seems like it would not have a problem keeping your camping equipment dry if you run into a rainstorm. It's easy to latch and unlatch (once you know to latch it from side opposite the latch, and rolls up easily to allow you to access the bed. It's secure when the tailgate is locked, keeps items out of site, and reach of passers by. One thing that may be a negative to some is since it is low-profile, the rails mount inside the bed. These are about 2" wide, so they do effectively make your bed a little smaller when hauling tall items. I'd recommend this to any one who is looking for an inexpensive low-profile tonneau cover. I think it's definitely comparable to some of the higher cost brands when you factor in the cost difference.

3.5 year update. This is still going strong. It leaks a bit more in the car wash but I don't ever have anything where that is a big deal back there. Maybe I should go tighten things up after all this time... This is really a well made piece of equipment. So easy to put on and off. It is grayed, but I have done NO maintenance on it. Maybe I should get some armorall on it. Original three month update I shopped and have now had it on for three months and it is everything they said and they did not overstate ease of use. They actually make it look more complicated than it is on the demo video designed to make it look easy. And it looks good. Examples of ease of use are the two boxed chairs that didn't fit. It's been through the car wash like six times and appears to be 95% water tight...and I didn't put the stick on insulation they send along with it. Don't know why although it is ready for use on some ohter project. Took literally less than a minute to take off fold and slide in next to the boxes. Folds up and clips easily. It is very well but simply designed. And the price is excellent. I am sure there are ones that can make your bed airtight or look better if you have extreme attitudes on perfection but for everyday use, good looks, locked up (with 2013 Ram autolocking tailgate) stuff that will stop all casual "takers" of things, this is an excellent choice. Somebody was thinking and likely a frustrated former buyer of these things that designed it. Five stars for me. Update 11/15/15 This is really an excellent product. It is not the absolute perfect fit that some expect, it has grayed just a bit in a harsh Montana Environment but I have done NO maintenence like with Armorall (OK, now I feel guilty) and it just works wonderfully. simple plastic fasteners can be clunky on the inside but work and are a simple design if you have any mechanical inclinations whatsoever. I didn't use the "weatherstripping" that came with it (saved me a few bucks on another project) and it fits perfect with no adjustment since putting on. And actually, them putting the weatherstripping in is an obvious attempt by the company to improve a product based upon the nitpicker response. No need actually. It is easy to use with only a couple of drops getting in in bad conditions. Also, I twice have bought items where just folding it back and using the plastic clips (simple design) didn't work so I had to remove it, fold it and put it along the inside for transport of the items. Doing that took roughly a minute. In another minute, I just put it back on the marks from taking it off and tighten it down and I'm back in business. If you are looking for that perfect look and use a toothbrush to shine your vehicle this is NOT your product. If you use your truck, have a house you need to take care of, camping to do, stuff to throw in the back and want to keep the back covered looking pretty decent with ease of use, this is your product. Oh and compare pricing this is a real deal. Made in America

We recently purchased a new truck, which did not come with a tonneau cover. Which, here in South Dakota we feel is a necessity. Installation took about an hour in 19 degree F weather in an unheated garage. The instructions are straight forward. The adjustment blocks were easy to use, but will probably need an adjustment come warmer spring and summer weather. That will be easy as all that will need to be done is to loosen two nuts and reposition the blocks. Fit and finish, low profile, all make an outstanding looking product. One self locking nut was missing from the package, which wasn't a big deal as I had plenty on hand that I could replace it with. A very good product.

Alright, as much as I wanted this to work, it is just not the best for me or a 2017 Dodge 1500. It shipped quick, was not too difficult to install (watched several videos). It looks decent, functionality however is more concerning. Here are the issues: 1- Rear seal against tailgate is very inadequate. Dodges have wide lip on the top of the tailgate. I have approximately 1/2-3/4" gap between my tailgate and the cover (see photo). When I lock my truck I can easily see the light from the bed lights on. It is a wide enough gap that anyone with a flashlight could look inside, identify what you have, then use something to pry the top off which would not take much. I usually back into my driveway which has a downward slant, this means rain hitting the top of my tailgate would easily go inside. 2- Like many other reviews, the plastic clamps are less than desirable. Tightening them down firmly causes them to bend to the point I could easily see these breaking within a couple of months. Any more loose and the top moves with the wind at normal highway speeds. 3- Access. Any time you need to flip up even the rear most panel to access anything, you have to undo each side. This takes about 20sec each. Not to mention if you have to crawl over a trailer hitch. Does not seem like a big deal, but it becomes a hassle when you need to access gear regularly, or it is raining. Then half the time, you need to re-tighten the latches because when you do flip it back over, you have to turn the latch sideways for it to lay flat against the middle panel. After a couple of times, the rear most panel is now loose, not creating a good seal, and moving around. The price was good for what you got. I have researched several, decided to try this one. But I found I use the bed of the truck more than I thought I did. So now I am looking at returning this one, going to try a BakFlip MX4 hopefully installing today.