ArmorSuit (6 Pack) Screen Protector for Apple Watch 7 41mm Max Coverage Anti-Bubble HD Clear MilitaryShield Film

It is easy to see the reviews that sellers plant. This is not one. I bought this item shortly after buying my Apple Watch. I thought it would be a simple way to protect its screen. Recently I thought about it and realized the idea of screen protectors is a huge scam. I have owned many watches in my life and none needed to be protected. Really, think about it. Since they were invented, how many watches have been manufactured? How many have shattered? The percentage must be minute. Apple has a protection plan for those unlucky few who crack the glass on their watches. It is $49 for 3 years of protection. Apple will not say how long one can expect its watches to last, because the company doesn't know! So why spend the money on a screen protector that may outlive the watch? I paid $7 for mine and received two in the package. The price you expect to pay to "protect" your Apple is a small sum. The price is actually in the time and aggravation spent applying the item! It is much more than the $7 cost and much less than the $49 Apple protection plan! Until I began applying the product, I could not understand how it could be the headache about which I read in the reviews. To begin, directions are not included in the box. The side of the box has a few sentences about application. On a piece of paper included with the product is a web address one can visit to view an edited video which clearly skips most of the time required to apply the product. Obviously the manufacturer doesn't want potential customers seeing the hell involved with its product. Buyers are sent a bottle of liquid to apply to product before applying to watch. Do NOT apply as much as is directed unless you want your fingers sliding when application time arrives. If the item is wet you are in for a long wait, so have plenty of food and water available. You could use the wait time to write that novel that has been rattling around in your head for decades... There is one reviewer who gave great instructions but I cannot in good conscience list his name because that might be construed as me suggesting one waste money, patience and time on this product. After doing your taxes, writing your novel or solving the problems in the Middle East, the solution MAY become tacky. If so, wait a wee bit longer and then use a hair dryer to get the film attached to your watch. Hopefully you didn't previously use the squeegee because if you did, it was in vain. By the way, though I watched the video for the Apple Watch, I did not watch anyone use a squeegee like the one I was sent. The corners will be difficult, so do not get the idea you are the only person who has been unable to apply this item. I believe that if many people find something difficult it is because something IS difficult! Just when you think you have the corners affixed you will notice you don't. At some point, things will look good and you will set the watch aside for twelve hours, or whatever "overnight" means. Beware of companies giving ambiguous directions for their products. It seems to mean said companies are creating a loophple allowing them to claim directions were not followed by the buyer. With my watch, I waited about 26 hours before touching it so I could be certain everything was dry before putting a band on the watch and wearing it. I DO recommend removing the watch band if you read the truthful reviews and are still foolhardy enough to think the application is easy AF. One needs as much space of the watch perimeter as possible to apply this thing, so remove the watch band!! After 26 hours of not wearing my new watch I picked it up to see two corners of this film had peeled up. I then applied more of the supplied liquid, which is likely water, and heat from my hair dryer to redo the application. I did the corners only this time, as they were the only parts not adhering to the watch face. I then waited another stretch (12 hours) before picking up my watch, attaching a band and wearing. I thought I was awesome because I was one of the few who went to battle and survived! The reviewers who commented negatively just didn't want it badly enough, but I gave it my all and the Apple Watch was now as protected as an American president or the Pope himself. Nothing would harm my watch because the screen was protected and the film couldn't be seen. Until the next day when I saw two corners with raised curves of film. They seemed very hard and solid so, though it annoyed me, I thought they wouldn't move. It had been about a week when I saw the film was lifted. I was not one of the chosen after all. The product is simply not going to remain in place. I now believe all the smug comments about this shield being easy to apply, or fantastic once one makes it through and sees daylight were made shortly after application when things seemed rosy. Amazon should not allow reviews to be written until at least a month after purchase so that customers would be able to read about how the item has performed, not about how it looks or how buyers think it will perform. My guess is that after the newness wears off, a buyer won't be as inclined to write a review as he would be shortly after receiving it. Because there were so many negative reviews about this product I decided to give it time before I commented. I am thrilled I did. I actually hope I can go change my rating to one star. No clue why I started with two. Just don't buy this product. Your watch doesn't need a bodyguard.

I'm a little surprised that this item has as many low 1, 2 & 3 star reviews as it does, but I think the product is fantastic so I guess I'm biased.Installation was easy, not a single problem encountered, though I will say, WATCH THE INSTALLATION VIDEO. If you've never installed this type of wet install screen guard. I have done this on iPhones, many times, but I still watched it.The main things to remember:1) make sure your hands are clean.2) the area you use to install it in, make sure it's not dusty.3) have paper towels (viva works well it bounty, less linty bits coming off) along with the microfiber towel when you start.4) when you start, start by spraying the back of the shield w/ the included solution. If you want, since there are two shields to a sheet, cut it in half & put the other shield away. Then spray the non adhesive back, then your fingers.5) carefully peel off the shield from its backing, if you sprayed too much solution, use your towel to get off the excess by letting it drip to the edges. Don't try to wipe it off!6) let the shield adhesive side down on the screen of a powered down device, moving it around until it's where it needs to be.(Don't panic, it will slide around a lot, if solution comes to the edges, use your towel to absorb it.)7) when you have it where you want, use the squeegee to work out air bubbles, keep your towel nearby for excess liquid. And be aware the shield WILL MOVE ABOUT when you do this, just shift it back in place. Try holding it in place while you squeegee.8) once you're satisfied that the air bubbles are dealt with & the shield in place, you can leave it to dry a bit, 15 or so minutes until the edges get sticky & you can press them down. OR, you can employ a hair dryer & speed up the process. It takes a bit, hold the heat to the shield a little & as you do this, try to get the corners to adhere to the edges. They will continue to lift at first, eventually staying in place after you smooth them down. It's a laborious process for a beginner. But it works.9) plug in your device or just leave it overnight to dry or "cure" (I turned my watch on, it was fine & then put it on the charger to cure) by the next morning the shield was dry & it looked perfect, no air bubbles or streaks.I barely put in any special effort, installed this while watching tv, while reclining on my chaise, in low light & it turned out flawlessly. But I've put stuff like this on before...It's been about 3-4 days and the shield is still looking good, I'll post pictures & the edges are all still wrapped to the screen nice and tight.If you want something that covers your watch screen rather than a small glass square that looks obvious, I urge you, TRY THIS PRODUCT OUT. It's easier to install than you think.Love this!**posted pictures...as you can see from the front view, the protector is invisible & crystal clear, the side view, the edges are covered, nice & tight, no lift at any edge. The feel is nice as well, smooth & your fingertips glide right over top like the actual glass of the watch. Great product!!!!

Al parecer no es de la marca armor suit, pero funciona bien solamente se despegan un poco las orillas

Bon produit, bonne qualité.

Me gusto mucho. Cubre muy bien el reloj y dura mucho.

perfect

No dudo que sea un buen producto.Sin embargo el paquete que me enviaron no tenía la mica. (Una ceja sin mica)