GLOTRENDS M.2 Heatsink Kits with Thermal Pad for 2280 M.2 SSD, Fit for Desktop PC Installation, 22x70x10mm Aluminum Body

This M.2 heatsink is well made - no sharp edges, nice finish, nice accessories. The thermal pad is essential to couple the SSD to the heatsink and seems to do a great job. The clips are not so tight it feels like they will damage either the SSD or the heatsink, and certainly hold well to keep this thing in place. The silicone bands are a nice alternative or addition for those who are paranoid. Overall, it keeps my drive cool and works well. Also, the price can't be beat.

I use these for the secondary drives in me and my wife's gaming laptops. Fits great. Works like it should. Will buy more if needed.

I ordered this for my WD Black NMVE drive that was idling at 58c and would exceed 70c under sustained loads and start to throttle. Installation was easy but make sure you dont place the thermal pad/heatsync too far back or you won't be able to screw the drive to the motherboard. After install, I immediately noticed an improvement in temps. The drive now idles at around 47c and only reached 53c under load with Crystaldisk benchmark. Pros: Cheap, Easy to install, nice black finish. reduced temps by 10+ degrees at idle and 15+ degrees under load. Cons: the instructions are lacking. I wasn't quite sure what to do with the metal brackets as there is no instructions for them and they didn't seem to fit on my drive. I just used the rubber bands. overall this product works as intended and for just $5, it's a no brainer. Buy it.

Anyone who PC games knows heat is everything when playing. I had never considered, however, adding a heat sink to my m2 drives. When I purchased my newest computer (which has 4090 rtx) I figured if I could shave a few degrees off, that would be great. Overall I've noticed a drop in temp of between 5 to 6 degrees C, which may not sound like much but when the first several hours of my gameplay stays in the 40 to 50 C degree range it makes for a better experience, and since I now have only the one kidney after buying this monstrosity I want it to last. The set comes with actual brackets or you can use the silicone bands that come with it to attach to the top of the M2 drives. Thermal pads were easy enough to fit even with my fat fumble fingers. I highlly recommend. Happy gaming.

Works great for laptops

Not essential, but doesn't mean it is a waste to get one. I used this with a Samsung 970 Pro. The good stuff -I like how it looks once installed. It blends right in with the black finish if my motherboard. -It comes with very easy to apply thermal tape. -It did have an effect on the temperature of my 970 SSD drive. About 8-9 degrees Fahrenheit. The bad stuff. -The metal rings that should hold it clamped to the drive are useless. They slide up and down. Thankfully the thick rubber bands that come with it do in fact hold everything together nicely. -Don't expect earth shattering temperature changes. I consider it more of a gimmick item for the user who wants to accessorize their computer would have. Overall I'm happy with the purchase. It was only a few bucks and did lower the temp of my 970 Pro a few degrees which can't hurt it. So don't read this as a negative review. I just wanted people to know what they are buying and what expectations they should have.

Attached the heatsink to my Roku Stick after it started overheating with out new Samsung TV. It never overheated with our other TV, but the new Samsung OLED seems to drive the Roku hotter. Since updating the TVs software and the Roku's software didn't fix the issue; I had to resort to plan-B. Adding this heatsink was relatively easy, even though the Roku is not flat. Enough of the heatsink made contact to bring temps down from 116C to 101C. Not as low as I'd hoped for, but the annoying message about my Roku overheating is gone. I'll probably buy another one to attach to the other side of the Roku to see if it can bring it down further.

I added two 3mm heatsinks to my Asus X16 Flow GV601 2022 model laptop for two drives and was able to lower the temperature on my WD SN850X by 18 C!! I've attached a before and after picture for reference. This heatsink is definitely worth adding. It fixed my BSOD issue from the PCIE WiFi card heating up the NVME.

pod obciążeniem spadek 6-8 stopni w idle nie ma zmian. Px700 pod obciążeniem przed 60 teraz około 52.

Simply nothing bad to say! My SSD stays perfectly cool, and installation was super easy. I mostly bought it because the original factory heatsink kept coming off, and this one has been totally worth it.

c'est super ma play se chauffe plus

I have a samsung 970 Evo 500GB NVME M.2 SSD and it had temperatures of around 70 degrees during idle loads. I was afraid I would fry my SSD after the warranty period ended leaving me stranded without a boot drive. So I decided to get this heat spreader. It might seem expensive (which it is indeed) but considering the peace of mind that it provides Performance: Merely putting this on the SSD has reduced max temps to 50 degrees. That is a HUGE temp drop. I didn't expect that. Allowing air over it with fans reduces the temps even further to around 40-45 degrees. Now I have peace of mind. Considering Indian weather, I don't trust our electronics to last very long at sustained 70Degree temperatures.

Qualidade excelente e de fácil instalação e o mais importante: muito eficiente. Atendeu perfeitamente minhas expectativas