Wood-All Red Oak Wood Veneer Sheet, Plain Sliced/Flat Cut, 24x96, A Grade, 10 mil Paperback

Great stuff looks really good

Good veneer- it took a few days to get it to stay flat. I used it to cover the sides of a bathroom vanity. It took stain easily to match the rest of the cabinet. It does not have any adhesive so you need to purchase that. Having a small roller to press it down to stick was helpful. I will most likely purchase it again.

These were gorgeous. No defects, no splits. Bought 4 and they arrived much quicker than expected and in perfect shape.

Easy to work with and fine quality. I will use it again.

Note: peel and stick RUB RUB RUB (sand) Very forgiving veneer. Supplies: Pencil, scissors, box opener, tape measure, wood, glue, contact cement, drop cloth, stain brush, acetone, microfiber cloths, sponge block sander, iron, pre-stain, clear. Replacing two cabinet end caps in place. Unrolled lay flat for 2 days. Measure 100 x’s. Easy to cut with box opener and medium scissors. Ordered twice didn’t measure correctly on first use. Veneer glued first attempt with loctite express wood glue and gorilla glue. Spread the loctite on the cabinet with a brush and to back of veneer. While letting that sit I spread gorilla glue heavy duty contact glue around outer edges of cabinet and zig zag through center with metal scraper. Experienced minimal bubbling. Used block sander and a piece of wood with smooth edge to rub and press every few hour over a few days. Used pre-stain followed by oil based polyurethane clear coat 2 times with sanding between coats. Follow up: someone wrote a review saying rub rub rub. I concur, sand, sand, sand and use an iron. Week 2: Only one small stubborn bubble one left. Second side Supplies: Pencil, scissors, box opener, tape measure, wood, glue, contact cement, drop cloth, stain brush, acetone, microfiber cloths, sponge block sander and an IRON Searched and could not locate loctite express wood glue. This time I used Titebond cold press veneer glue instead of loctite express wood glue. Titebond is extremely runny (aided in sliding or shifting veneer when necessary). However on day 1, I have more bubbles than experience on first attempt. Used iron on hottest setting NO STEAM after 2 hours no bubbling. Will update in 2 weeks, Stain process is the same. 1 month very satisfied. Iron was magic touch!

Love the product! Using to reskin cabinets in kitchen. Used to be dark mahogany in color originally. Used in conjunction with real oak pieces to do molding and doors. It's not forgiving if you are not careful as the knife will follow the grain if you try to go too fast. However, it is easier to cut and make a mistake with this than a solid piece of oak. Saves time by allowing you the freedom of making small adjustments with a knife or sanding block rather than cutting a whole new piece. Cut and trim carefully prior to application of cement or you will have caused yourself a lot more work. The contact cement doesn't come off once it is set and will tear up everything if you get the veneer positioned wrong and try to adjust it.

we stained it and stuck it down with DAP with ease. we used it successfully for three projects so far. we found a desk for free online and rehabbed it completely. Caveats: you need to weigh the veneer down a day in advance to uncurl it before cutting. When you cut, follow the entire length across because notching out will cause rips to propagate from the corner.

product description says this is "10"mm veneer when it really is "1.0" mm veneer. I thought I was getting a 24" x 96" piece of 10mm thick veneer when I received rolled up 1.omm thick veneer 24" wide by 96". Description needs to be corrected.