FLEXTRIM # WM105: 3/4" x 3/4" Flexible Quarter Round Molding - 8' feet Long - Made in The USA

My dining room is elevated 3” above the foyer, the open corner is rounded in a large arc. When we replaced the carpet with engineered wood flooring my (excellent) installer used 3/4 x 3/4” bullnose trim on this corner, saved a bundle over a custom piece. Unfortunately, two years later the curved trim piece cracked from the strain.I bought this rubber trim, stained it and replaced the wood trim, it worked terrific.

Easily workable, paintable. Recommend.

Coil came bent for an outside corner, so I placed it in a sunny location with weights to bend it for an inside radius, a fairly tight one! It took a few days but it did relax enough to paint and install. Easy to cut (miter box and hand saw), easy to patch at old-house corners (paintable caulking), and easy to paint. I pre-painted, installed with contact adhesion caulk, and set gallon jugs with water in them to hold it in place (set on top and also backed into it to hold it in that inside corner). Looks great and has stayed painted, too! (Sherwin-Williams Cashmere wall paint, satin equivalent, Jade Dragon color.) -- Albert's wife, Megan

Pretty nifty piece of hardware if you find yourself needing quarter round along any surface that isn't completely straight. We used it to wrap around our rounded fireplace and stained it with some varathane gel stain. The texture of the trim does a good job looking like natural wood once stained. My only gripe is that it's a bit on the expensive side and the adhesion wasn't great. We ended up using some wood glue to make sure it would stay put.

We removed the carpet on our stairs and painted them. Needed someway to trim out the bottom where the step curves around the newell post. Did a lot of searching online and finally found a reference to this flexible quarter round. It was cool weather when it arrived so it felt rather stiff. Before installing it I put it out in the sun on a 85F day. It softened up nicely and was very flexible. I glued the back and used 18ga nails to attach it. Trimming to fit was fairly easy with a utility knife. Haven't painted it yet so don't know how well it will hold paint.

worked perfectly!!

Okay but glue strange

I had some tricky areas to trim around that I was using 3/4 round oak. The areas where the trim radiused around corners was going to be a challenge with wood. I tried steaming sections but it was going to be a long process. I ordered this stuff thinking it wasn't going to work. No way it would both take stain and also bend. Glad to say I was wrong. The only issue is the product is NOT dimensionally the same as 3/4 round wood, it is slightly larger. You can't butt this or angle it together with wood and get a size match. For my application I simply used this product until it came to a point where it was hidden or changed to another section without seaming. This was a huge time saver.