Slip2000 Extreme Weapons Grease Syringe (EWG), 1 Fluid Ounce / 30 Milliliters, (60339-D)

Having used all kinds of oils, CLPs and grease when I came across Slip2000 EWG I wasn't sure what to expect. I have had really good experiences with some oils--good lubrication, and longevity, no odor.;; as well as some decent ones with CLPs and grease. However, once I tried this stuff, it made everything else seem like water and inferior. Here's why: 1) It's the perfect viscosity. Not too runny like many greases, or too thick. Just right at where it goes on smoothly but stays put. 2) It's odorless. 3) WOW the lubrication is as good as any lubricant I've used--oil, grease, CLP, etc. And even after firing many rounds, check your rails, barrel, etc, you will still feel the grease and it's lubricating! It's protecting which is WHY you want grease NOT oil. 4) After using it on my 2011's, compacts, bolt-actions, semi-rifles, etc. in hot and cold weather, the protection is fantastic and has not caused any issues on any platform. I have not seen ANY other lubricant where it worked as well on everything. Usually an oil, or grease based on its weight/thickness worked a little better on one or the other. 5) Makes clean-up so much easier too. Carbon wipes off easy! 6) *bonus* great on knives and literally even diving in salt water it STILL beaded off.

I have been using gun oil on my guns for years and years. I never really tried using grease, partly because it seemed like it would be a messy job and I would probably wind up with grease where I didn't want it, etc. Deciding to give the Slip 2000 a try, I am impressed! I have used Slip 2000 on several guns now, and I really like its performance. I could feel the difference immediately on the first gun I lubed with it. The slide racked much smoother and quieter than it does with just oil. Applying the Slip 2000 grease is also very easy to do with this syringe. It is easy to get just a dab directly into the slide rails with the tip. To prevent the grease from continuing to run out of the syringe, simply pull the plunger back out slightly. The application can be very precise. For larger application areas, I just dab a bit on and use a fingertip to smear around. There is still, and will always be a place for good old oil. Some parts of the gun need a drop of oil rather than grease. But there are several reasons to consider using grease instead for general lubrication: 1. It stays where you put it. Unlike oil, grease is thick and does not run or drip. The dab you put in the slide rails will still be there the next time you clean the gun. How many times have you field stripped your gun after a day at the range and thought "where the heck did all the oil go?". With grease, you won't have that issue. 2. Resistance to heat. This grease is made for lubricating parts that get hot. After a day consisting of an IDPA match, some practice, and shooting a qualifier event - all the grease I had applied to the outside of the barrel was sill there - still moist - still lubricating. Oil would have been long gone! 3. Resistance to gravity. After oiling a gun and either hanging it up or lying it down, the oil immediately begins to drain to the lowest area (and sometimes out completely). Yes, you'll still have a very thin coating of oil, but not nearly what you had applied. I know this is a little redundant to my first point, but this relates more to storage than use. One syringe of Slip 2000 should last quite awhile. At the price, it's a great value and a top notch lubricant for your guns.

This greace works. It stays where you put it. It smooths and significantly reduces friction in your slide function. I am very impressed with this grease and certain it will reduce cleaning and maintenance as it has already surpassed my usual service routine and looks like as fresh as the day I first put it on my 1911 & my polymer framed race pistol.

Works for us every day in our repair business

I bought this oil along with grease as I want to use grease on certain parts of my hand guns. I share the same review with both products. Both the oil and grease are pleasant to use. Very little to no smell. Easy to wash my hands with a mild soap after the work. I usually shoot 200~300 rounds in one sitting and it is nothing for this lube. The internal parts are still dripping wet after 200~300 rounds and the hand guns cycle / operate as smooth as silk. The debris (carbon, etc.) come right off with patches / paper towels. Unlike what the manufacturer and many users state, which I had never believed, these products DO collect the debris but they keep the debris suspended in the lube, so the debris do not adhere to the surface of the parts and cleaning is dead easy. The grease alone is a bit too viscous / thick for the slide + frame rails of my tight fit 1911 so I apply a very thin layer of the grease and then add a small amount of the oil. This works great! I also like Mpro 7 oil and it cleans a little better but since I want to use grease along with oil and do not want to mix two different products, I am switching to Slip2000 100% (no Mpro 7 grease available and the manufacturer told me they have no plan to develop grease at this point).

Item is great. Being forced to do a review isn’t.

Told me to buy it in my gun manual

good price