SPEC-D TUNING LED Strip Black Projector Headlights

I purchased these headlights based on a few things. 1.) I have the halogen factory installed housings. Upgrading to projector lenses was something I wanted to place a better beam pattern on the road. 2.) The LED strip light across the top. I have to say these things look factory. They fit just as they should, no gaps, no warning lights, and no issues at all. They look awesome... They come with very well written instructions if you need them. They do take 2 hours to install so keep that in mind. The front bumper cover needs to come to get access to the housing mountings. Once you get them removed and install the new housings make sure you align everything properly. There are 4 screws on the housing for adjustments. 2 on the top and 2 near the cow opening to get them centered where they need to be. The LEDS are bright, they are not as bright as the like an Audi, but they are visible for daytime driving lights. Where they rock, is at night... They look perfect. For you out there replacing xenon lights, these do still offer the self adjust, you just swap the motor over. The harness is an exact match with no issues. The projector lens throws a perfect pattern. As with any housings being swapped you will need to adjust the lens alignment. I'm sure that went without saying, but for those who expected to swap and drive; don't be disappointed why your light beam is shooting into the trees and not on the road. Adjust and you won't be disappointed. I am very happy with this product and I have received several compliments from the friends of mine who knew I was changing them out; who at first were skeptical. They look amazing is all I can say.

Look amazing and put a lot of light where it should be on the road. Mounted perfectly on my bmw and wiring was exact plug in. Only down side, you’ll need to code your car if your BMW had the headlights that turn with the car. Not a big deal if you have the program and obd2 tool. (BimmerCode works great). But if you don’t, then getting everything to do it yourself will run you about $100.

This one upgrade (LED Lights) has my Bimmer looking brand new. They just NEED a brighter H1 LED bulb; I would have given five stars otherwise.

These lights are nice, the wiring was easy to do with the halos I just spliced them into the strip lights which was the same color wires black and white. Took about 1 hour to install, when installing the lights to the bracket make sure the bottom lip where the screw goes is on the correct side or the the bumper won't go on correctly. Some people might think the fitment is wrong but it could be because you installed the bottom piece on the wrong side. Anyways the lights work great and here's a good note : My BMW is a 2009 so it does fit a 2009 bmw e90. It says the fitment doesn't work on a 2009 but trust me it fits fine.

I do have a defective assembly. Ut im sure with the company’s reputation i will receive a repl oart and can ship the defective part back im even ordering the rear as from the same company that sho tell u something ! I received alot a good compliments on the headlamp assembly

I was really excited to get these headlights in. I had read the reviews and was not too concerned with the fact that the halos were "dim." But what I was taken aback by was the fact that the headlights in themselves with the halos ON are not bright enough to illuminate the road in the dark. I felt unsafe driving my car. With this being said, we tried replacing the bulb lights in order to provide the aesthetic look I was going for with the halos on as well as having enough light to drive at night. As we were replacing the bulbs it was harder than a regular stock headlight to get access to the bulb. The retainers to the bulbs to hold them in place fell to the bottom of the engine and we were only able to gain access to one. If the headlights were bright enough in the first place, I wouldn't have gotten in this problem. As soon as I have time, these headlights are coming out and being returned. I hope nobody buys these because the picture and description are very misleading.

In love with them just have to remember to adjust them it’s a turn switch on the back of the head lights to lift them up to adjust the lighting at first they were aimed towards the ground sort of so I noticed that switch and started to turn it the lights started to lift now I can see anything and everything on the streets lol Night Life!!!!!lol

fitment isn’t the best and mounts can be broken easily

please don't buy this product it looks nice but its very cheap made, the bulbs burn out fast and it heats up so much that it melted the whole front of the housing its made of some cheap plastic it melted and made a huge circle hole and now its garbage used it only for less than a week and now I'm stuck with a headlight with a hole on it that water goes in so no driving for me at night until I find an other headlight housing, what a waste of time and money

Les lumier marche pas sur les haute faut conecter le hallo chez pas trop ou pis linterieur cromer a decoler