AGPTEK RFID Door Access Control System Kit, Home Security System with 280kg 620LB Electric Magnetic Lock 110-240V AC to 12v DC 3A 36w Power Supply Proximity Door Entry keypad 10 Key Fobs EXIT Button

Overall good, everything works the key cards and fibs were all programmed and the instructions got it working but there’s a information deficiency in the provided instructions. Only three of the 12 wires ( 5 if you connect a bell ) are used leaving some features nonfunctional or unused without better documented instructions. Such as how to set so that a card swipe AND pin pad entry are required for entry and the functions of the other unused wires are left a mystery I searched for a document page but there’s many iterations of this hardware and they don’t all have the same user procedure to program or default codes Also you’ll need 12 volt wire and angle brackets or z bracket with additional hardware to install on a door it’s not included.

The install directions were not as clear as I hoped, but self installation was still easy. I did by a door bell to wire in also. Depending on where you plan on installing everything make sure you have plenty of wire on hand. I installed the main unit in the attic and ran wire down to the door open button and keypad. Because of this setup, I did have to run out for more wire. Performance has been great. Overall I recommend this product.

This is the real deal for a fraction of what it has traditionally cost to deploy an RFID-based magnetic door lock. It has everything you need for standalone deployment, but can be easilly integrated with other systems. I install the keypad outdoors and have had to replace it every few years as sun and use degrade it. Ordering the correct individual replacement parts has proven difficult, but who cares? The whole kit costs far less than replacement parts for alternatives. Installation instructions are a bit Ikea-ish. Even if you find them challenging, your handyman won't.

Works as described. My husband is a handy man so he installed it. Not that easy for me to do myself.

This is. A great item. Simple and cost effective. The directions are a little confusing for those who don't know wireing. But it's a simple Install. Easy programming and operation. Now here are a few things that may help you. If the power fails or you have to take the system off for any reason the programming is not lost. It is programmed until you change it. With this system it keeps the lock (magnetic lock) on all the time. If the power fails it releases. The term fail unsecure is what this is called. But if you have this system wired to a plug and get a ups battery back up or a battery back up kit it will keep it secure. I have ordered 5 of these and many others and this is one of the better ones for the pricing and operation. Worth the money. You can change the type of lock used to secure the door and even add a wireless remote to this system. I recommend this item and seller.

1) No instructions. 2) wire from ground on controller was missing. 3) After completing wiring and installation (upon entering code) keypad controller would greenlights (door was supposes to unlock) but about 70% of the time magnetic lock wouldn't release (I had to grind out bolt on outside of door to get into locked space). 4) Fixed it all with a 1 Gang wireless WIFI relay switch to turn off power to door and unlock the magnetic lock. This is a great lock idea if it worked. The magnetic portion of this setup works great!

It's a great starter kit at a bargain price. This was my first experience with electromagnetic door locks. The instructions are pretty good, and the steps pretty straight forward but with no screen programming is strictly on the keypad using their flow chart. MY ONLY GRIPE is that the RFID sensor is NOT where its indicated on the control panel. It is in fact right above the #2 on the keypad. Poor labeling, but functionality it still works. Not enough to take a full star off. Additionally, the only thing the kit is missing to make it code compliant is the REX (request to exit) sensor. I added one of these mounted to the wall above my setup and it's triggered the same way the button push is. The included power supply is also enough to run the Rex which made installation easy. My advise is setup the whole system on a work bench and test it all out first. To best optimize cable runs and lengths. I used a spool of alarm wire and it works great. I added a second push to exit button under the reception desk to allow people to be buzzed in. For the price it's a great setup. I would recommend it and use it again in a future project.

I spent hours trying to insure perfect alignment yet I could still pull the door open easily. Otherwise it look like a nice kit that was well put together

El técnico lo instaló sin problema y funciona perfectamente. Yo no soy técnico ni me interesa experimentar, así que no tuve problema con la instalación. Esa bueno que compren la contrapuerta para facilitar las cosas, pero tardaba demasiado en llegar.