MZS Red Motorcycle Clutch Brake Levers Short Adjustable CNC Compatible with CBR650R 19-25 / CB650R 19-25 / NC750X 18-25 / CBR650F CB650F 14-18 / NC750S 16-20

I busted my clutch lever when I dropped my bike in the driveway. I've been wanting to swap them for a different color anyway haha! I found these while searching the Amazon. The price was right so I thought I'd check them out. These levers are super easy to install. The brake lever is especially simple. The clutch lever took a couple minutes to get the cable in place, but once you get that in, you're good. The look of these things is just awesome! They are the short levers. For my hands, which are larger, I have no issues with the settings. I found a number that works for me. Previously, I had the stock levers which were super long and a bit awkward for hand placement. With these new ones, I have no trouble. Great levers- I'm loving them so far!

FIt perfectly on my 2017 Ducati X Diavel S. they are great looking levers.

I love these levers, they feel so good to my fingers, especially with gloves on. And that adjustment is so clicky, definitely easy to adjust on the go. Size is going to be a little short but that's a good thing, especially if you ever drop your bike it won't hit them. They're lightweight and it's made of good quality. But the only problem is, that I didn't know. Read, you're going to need the bushing for the clutch side. Of time if you decide to go with these levers. And also it's a good thing to buy a new bushing anyways from the wear and tear on the other one. I actually made a homemade one out of a permanent marker case. Don't judge me, I will buy a new one eventually

For the price and adjustablility features you can't complain about the very small issues this product has. Install was a breeze and only took me 10 mins to change both the front brake and clutch lever (plenty of youtube videos online on how to do this). My only gripe with these levers are the following: -They came pretty loose from the factory in regards to the bolts that are used for adjusting the throw on them, so make sure you tighten them down to your liking -The shims supplied were worthless and would not fit on my R3 to tighten up the slight vertical play they have when installed on the bike -As stated above their is a slight vertical play in them if you wiggle them up and down, a lil more then the factory levers had, but not dangerous amounts in my opinion. -The finish on them is not the best but not the worst -Availability of other colors, wish MZS would have more colors available using Prime Other then the above, I would recommend these to a friend or anyone looking to upgrade the stock levers on their Yamaha R3, definitely makes the bike handlebars look more complex and the adjustablility of both the clutch and the brake is awesome to have to suit your hands reach.

These levers are quite nice and installed without difficulty on my 2022 Kawasaki Versys kle650. There is a slight issue with the clutch switch. Normally you should be able to start the engine while in gear so long as the clutch lever is pulled in. However, because these are adjustable levers, the lower settings (1-5) will disengage the clutch sufficiently but not enough to activate the clutch switch. Some filing and grinding should be all that’s necessary.

Super easy install. Just make sure you have a little all purpose grease, channel locks w/ padding, and a 10mm socket and wrench for the R3. Took about 15-20 minutes and got out for a test ride. Little stiffer than OEM but works great so far. Comes well packaged with both levers and looks great in the bike. Build quality feels solid too.

Purchased for my Tenere 700, love these levers. Love that the inner side does not have the typical rounded ends. Returned a different product for this reason -- I always operate the clutch with two fingers and the rounded ends would put too much pressure on my ring finger. Perfect fit and functionality on my Tenere 700.

High quality and good fit. Installation took me about 30 min. Description could be a little better. E.g. it took me a while to understand how to take the old one apart to reuse the pressure point part. And adjusting it was misleading. Almost broke it. And how to fit it into the rubber seal with the handle attached was tricky. My biggest problem is the handle length. My clutch can only be operated with 2 or 3 fingers. My ring finger barely fits on the end and is uncomfortable.

Fit really well, and I love how it looks on the bike. Just be sure to undo the clutch sensor, or you'll break it while undoing the stock levers, the manual also mentions this, but unfortunately I was ignorant about it

I have been riding with these for around month now. And haven't had a single issue, so far I am extremely happy with the functionality of this, the length adjustments work really well, and no hassles with install, I have put them on my 2020 R3. Amazing product for a price. Just going to wait and see how the dyed metal hold up in the sun 😄

19年式speedtwin1200に取り付けました。 ブレーキレバーの方が少し手間取りましたが30分程度で完了。 見た目、質感、使用感とても満足してます！

I have installed it on my Honda SCL500 and it feels, works and looks great ! It is a game changer to be honest. Very nice product and looks way better compared to the original chrome levers.

Great quality and easy to install. Cleans up the look of the bike quite a bit compared to the stock levers. Very happy with the quality for the price