Mackie Onyx Artist 1-2 2x2 24-bit/192kHz USB Audio Interface

Very good build quality. Full metal body and rugged potentiometers make it highly durable. The preamps are very good at this price point, provide about 55dB of clear gain, and have a very low noise floor. If you are using a condenser mic, it provides a lot of gain. You may have difficulty while setting levels for dynamic mics, but keeping about 90% gain level seems to work fine with typical dynamic mics. Very quiet dynamic mics like the SM7B might need a mic activator with this interface. Converters are good and have superior performance in recording, including up to 192 kHz sampling rate. Monitoring latency is almost nonexistent, hence it is ideal for latency-free monitoring. The audio quality is good and has a slightly vintage feel, likely due to the analogue circuitry. Works with Windows, Linux and Mac, where Linux and Mac do not need any special drivers. The headphone amp can drive a wide range of impedances, including modern low impedance headphones. Good for beginners as well as professional producers. I could not test MIDI, but it's a good to have feature.

Great Audio Interface for XLR Microphone. Built like a tank. Literally. Has enough bit rate and bit depth. Headphones doesn't sound as good as plugging it directly into the computer. It does sound a bit muffled and bloated. Another issue is most of the gain is at the last few steps of the knob disabling users from micro adjustments and using knob to it's full potential.

Built quality is great, but the level of the gain in a little bit low, and the volume knob makes a cracking noise when adjusting wile playing music or while working on DAW, but that cannot be a big issue. The rest is very nice to use.

I used the product for 2 months and then it started acting weird. When I pluged in the mic into input 1, it worked the way it should however, since a week I started noticing no flickering light on input 1 and as a result I wasn't able to here anything. When I connect the mic into input 2, it works but only if I increase the volume by 100% on GarageBand or Logic Pro. I checked if it is a software issue on my computer and update it but that didn't help either. I never thought Mackie would give me this kind of an issue. I am highly disappointed to have invested in this brand and planning to trash this product (in case I do not receive any support) and purchase Focusrite.

Mackie Onyx Producer 2x2 Audio Interface. Purchased on Amazon India from seller Sonotone. Background - I was interested in this product Mackie Onyx Producer 2x2 Audio Interface after getting poor experience with Vault AI SOLO! Vault AI SOLO did not understand Windows control panel sound input monitoring settings and always listened-back on speakers no matter what were the settings on it, in DAW as well as in Windows 10! Pros - At 5999 INR Mackie Onyx Producer is a full featured value for money product. The sound quality is quite good for home recording. There’s no noise in signal. I am an amateur so can’t comment about studio quality. I plug in my electric guitar and use Guitar Rig 5 Amp Sim on Windows 10. I am at 85% gain with Hi-Z on. After 90% it gets to add crackling and noise which is normal. On Windows 10 without drivers the product just gets detected as Input Output device in Windows sound control panel. But it gets its full life after installing the Mackie drivers that are available on Mackie website. At 24Bits 48KHz 128 samples I am getting about 5ms input and 5ms output latency which is quite acceptable for amateur work, on Ryzen 5 with 16GB RAM on Windows 10 64. While Mackies’ own ASIO driver is good, you can also opt for third-party options like ASIO4ALL or KoordASIO as well if required. They also work very well with this interface. The interface obeys the Windows 10 Sound Control Panel settings correctly. I am on 64bit 21H2. While it supports Midi In Out I have no experience with that so can’t comment on it at all. Mackie’s own control panel is good but except selecting your device & adjusting sample size, there’s no real need to do any more adjustments therein. Observations - One thing I find lacking on Audio Interfaces is that they do not have any power on/off button. Most modern desktop PC PSUs these days enter standby mode when you shut down Windows. They still provide 5V to USB ports, LAN and other internal circuitry and hence if you do not turn off mains the Interface remains somewhat powered on. While the USB LED turns off on this device, other indicators like Hi-Z or 48V (If were pressed) continue to glow. So on/off button would have been a great addition. Another observation I have is that the Hi-Z or 48V are not exactly toggle buttons. Though their design is elegant, they return to normal position each time they are pressed. So they seem to be electronically controlled inside like a Latching or Momentary push switch method. To visually know that Hi-Z is engaged is to check the glowing LED. The button remains in same position. So in future if the LED fails there will be a bit of inconvenience to find out if Hi-Z is engaged or not. A toggle push button could have been a simpler option. Also note that while the amazon page says ProTools, it has been discontinued by Mackie. So in your package you will only get Waveform OEM license. (Jul-2023) However I already knew it thru my pre-sales interaction with the India dealer Sonotone. Sonotone & Mackie APAC center have been greatly supportive over last few days for my pre and post sales queries. Verdict - Overall go for it. Great value for money. See various photos and screenshots for further details.

Software working, no damages clear sound quality and yes cheap and good for musicians if you are recording

Not that good. Average quality. Buy interfaces above 10k if you want professional quality. It has quality equal to any laptop's default soundcard. Can't go very high quality with the interface. Although it's a 24 bit sound card still i/o preamps are not very clean and high quality. Latency is around 10ms at 512 buffer size which makes it bit hard to directly monitor your performance through effects/ampsim. I also experienced some unexpected zitters in audio sometimes. Save some money and buy a better sound card for professional usecase.

Really happy with this audio interface. For this price range, if you are not recording and just want to connect studio monitors to PC for music production, this is the one to go with. No latency and 24 bit output and I am loving it. Its better than Behringer UM-2 and UMC22 as they have 16-bit output. So you are losing out of the full power of your monitors and details.

It's good built quality. It's affordable and it does a decent job.i use it for small bedroom studio it works well with 1 mic & a midi

Estuve varias semanas buscando con el presupuesto bajito en Amazon y encontré esta excelente interfaz. Conectividad de plug&play instantánea con mi Macbook y sin ningun problema. La uso para grabar ideas de bajo eléctrico para mis proyectos. Se siente bastante sólida, buenos componentes electrónicos, buen sonido y muy portátil pues cabe perfectamente en mi mochila. Recomendable.

Ürün çok kaliteli , sadece içinden usb kablosu çıkmadı , hemen amazon ile iletişime geçtim maduriyetimi nakit iadesi yaparak çözdüler ben de hemen bir kablo satın aldım , mackie kalitesi , amazon memnuniyet ile harika

ワイヤレス環境で遅延が気になり、有線環境に戻すために購入。PCのイヤホンジャック直刺しよりも低ノイズで音を聞きたかったのと、各種コントロールノブが本体上面ではなく正面側側面にある機種を探してこの機種にしました。 配信やレコーディングはせず、音楽、映画などをそこそこの音質で低遅延に楽しむ用途ならなんの問題もありません。またモニタースピーカーとイヤホンそれぞれの音量が独立調整できるのも何かと便利です。 WEB会議のためにコンデンサマイクを接続していますがこちらも低ノイズで満足しています。

Regalo de cumpleaños de un compi. Lo usa junto a un mac. Funciona muy bien. Calidad precio inmejorable