For better product experience,please pay attention to the following contents Precautions 1.Upon the completion of the installation, switch on the power, then disconnect and subsequently reconnect the air tube, repeat several times for better outcome. 2.In order to achieve the best working results, please use the original accessories. 3.Air pump is not waterproof, please keep away from water. 4.Check the air tube regularly, make sure it is not being blocked, bent, and there is no air leakage. 5.Do not place the air pump lower than the water level, you can install it on the aquarium tank. 6.When the air output of the pump is decreased or noise is increased, please clean the air inlet Super simple installation 1. Connect the air stone to the air tube. 2. Connect the air tube to the air pump outlet. 3. Stick the sucking disc on the back of the pump. Install the pump on the outer wall of the aquarium, but above the water level to avoid any possible water backflow. 4. Place the air stone in the aquarium tank, immersed in water. If the air tube is too long, cut a section as needed. 5. Connect the power adapter to the electrical outlet to start operation. Aquarium oxygen pump YDQB4106 Specification: 1. Power supply: 100-110v 2. Active/reactive power: 1.0 /1.5 watts 3. Initial flow: 18L/ H¡À10% 4. Water depth: up to 19.68 inches 5. Aquarium tank capacity: 24 gallons 6. Noise: <33db Package Including: 1. 1 Aquarium Air Pump 2. 1 Air Tube 3. 2 Air Stones(1 big,1 small) 4. 1 User Manual 5. 1 Sucker
Trustpilot
3 weeks ago
2 months ago
