Husky Liners - Rear Mud Guards | 2015-2020 GMC Yukon/XL, Rear Set - Black, 2 Pc. | 59221

Ordered these for my 2016 gmc Yukon Denali, instructions are straight forward and they feel high quality. Get to use existing hardware in your fender wheel and just have to add 1 hole to the inside but it’s really easy to get done. I have husky liner floor mats as well, all of their products are great and cheaper than weathertech. I would recommend these to anyone. The fit is exact and looks factory. Should keep excess debris off my quarter panels, 2 thumbs up.

Installed without tire removal. 2018 GMC Yukon Denali with retractable running boards. The installation requires drilling a hole for the 4th screw & nutplate. In order to make the hole in the wheel well liner I just used a roofing nail heated (held in vise grips) with a propane torch, easy peasy. Fit & finish is excellent, as good as OEM.

Knowing that this product was going to be difficult at best to install with the tire in place . . . Take your time. Product is perfectly fit for the 2015 GMC Yukon XL rear. Remove 3 - 7mm screws and install the flap, poke a small hole for the fourth and screw it through the existing wheel well liner. Sounds easy but takes about 45 min. per tire because there is only 2-3" of space between the tire and wheel well.

Need to protect your vehicle this is it. Also helps throwing pebbles onto vehicles behind your vehicle. Great item.

They were easy to install, 2 out of the 3 holes were spot on for this vehicle. Only had to re-drill 1 hole on each mud flap about 1/2" away to accommodate the vehicles 1/4" socket size mounting screws. The 4th hole was drilled into the inner liner for added support, that hardware is included.

I like the fit and finish of the mudguards and how they are designed to contour the body shape yet withstand the wind and weather pressures. Fitting the rear ones are reasonably easy w/o taking the wheels off, but for the front, the wheels have to be taken off. There is a film that prevents any movement in the mudguards from marking the paintwork and is easily applied in a way that does not make it obvious.

Perfect fit but I just don’t know if it’s just my truck (2015 Yukon Denali) but I can only get three out of four bolts in and the last one that goes inside of the wheel-well, I do not have any metal material around that area to add the clip and bolt. I do have a factory fabric wheel-well so I don’t know if that’s the case but it is pretty sturdy with the three bolts installed.

These mud flaps are designed to use the existing hardware that came on your vehicle. You just take the screws out and add the flap and replace the screws and you can put them on in a few minutes each.