EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card Standard Type(2 Pack) - White

筐体が狭く、ＧＰＵ電源がギリギリで、蓋が閉まらず、慌てて購入。電源取り回しが、ボードの逆方向から行うことができ、ケースの二が閉まった。 ＧＰＵがでか過ぎ？ 筐体が小さすぎ？ 注意点は、コネクター方向が２種類あるので、購入時に注意が必要。 （間違えると、当然、つきません。）

此方のメーカー製180度ターンさせるコネクタはマザーボード端子の奥まで刺さらなかったのですが 此方はしっかりと刺さり止まりました LEDも同期され綺麗に光らせられます しかしなぜ電源ユニットからの接合コネクタもホワイトにしないのか？ 最近のピラーレスケースだと正面から見たときにここだけ黒が良く映えますよｗ Ver.Upを要望します

アルミ製よりこちらの方が安かったのでリバースタイプを購入、 玄人志向のRX9070XTに取付ています。今の所は無問題です。

商品自体は良いんだけど 購入時に商品の説明で一番大事な爪のところの画像がないからどちらがリバースタイプか普通タイプわからず間違えて買う可能高い。せめてリバースタイプと普通タイプの画像がないとまじでわからん

発色、見た目最高！ しかしそもそもが発熱の恐れ、発火の恐れはある💦 100のおすすめはできない 本来付けない方が熱対策になるし配線もスマート😳 しかし発色orカラーケーブル使ってデコりたい人はおすすめ🙋‍♀️ カッチョいいもの✌️

グラフィックカードの電源を上側に出したかったので購入。 思ったように取り付けできました。

Radeon RX 7000シリーズで使ってますが、接続時も隙間や歪みなどもなくしっかりとキレイに付けられているので満足しています。

2023年9月に購入しましたが、2025年9月になって電源が上手く供給されず起動時に一瞬電源がついては落ちるという挙動をするようになりました。仮に起動しても数分で電源が落ちます。 RGBライティングつきかつL字コネクタという事で重宝していましたが製品の品質に難ありです。

worked fantastic, worked on my rtx 3080 for about 2 years now working on my rx9070xt, don't get hot, good quality, look good for my case to make it better on the angles, very good value, and brilliant durability

best way to keep. ablest straight and remove the unnecessary bends in the gpu cables high can cause harm later down the line hides. ablest better looks great and colour matching white or black

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about. As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily. I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive. If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.

Funciona bem com uma 7900xtx

Adds white accent and RGB lights to my white build!