Sound Oasis - Sound Therapy System Deluxe S-5000

Beschrijving

Suggested Use: Power Sources AC Adapter: Connect the supplied AC Adapter to the AC Adapter Jack located on the side of the unit, and plug the AC Adapter into a wall outlet. NOTE: Your Sound Oasis Deluxe will not operate on batteries - it needs to be plugged into a wall outlet to operate Battery Backup: In the event of a power failure, your unit’s battery backup provides enough power to maintain accurate time, illuminate the display in dim mode and sound a BEEP alarm for about four days. Note: If you have set the unit to play a MAIN SOUND or RADIO alarm, the battery backup feature plays a BEEP alarm instead to conserve power. Installing the Batteries: Open the Back Up Battery Compartment located on the back of the unit. Insert 4 AA alkaline batteries (not included) according to polarity indicators inside the compartment. Replace the battery door. Clock Operation Setting the Clock and Calendar Press and hold SET TIME for two seconds. SET TIME appears on the display. Press UP or DOWN to set Hours. Note: The AM and PM indicators are visible beside the Minute digits. When your desired Hours setting is reached, press SET TIME to store the Hours. You will automatically move to the Minute setting. Repeat Steps 2 and 3 until you have selected all of your clock and calendar settings (Hours, Minutes, Year, Month, Day and 12- or 24- Hour Time Display). Press SET TIME to exit this function. Dual Alarm: In order to provide maximum convenience, your unit allows you to set and wake up to two separate alarms (Alarm 1 and Alarm 2). The alarms can be set completely independently of each other with a different wake-up sound for each alarm (BEEP, RADIO or SOUND). Your unit offers the following alarm options: Sound: Any one of the 24 nature sounds, the Bio Sync sound or any Memo you may have recorded. Radio: Your last played radio station. Beep: Buzzer alarm. Off: Alarm is off. Note: SOUND alarms are selected when you set your Alarm Time and Alarm Volumes. RADIO and BEEP alarms are selected separately. Setting Alarm Time, Sound Alarm, and Alarm Volume: Enter the Alarm Time Set Mode by pressing and holding for two seconds the SET 1 button to set Alarm 1 or the SET 2 button to set Alarm 2. SET ALARM 1 or SET ALARM 2 will appear on the display. Press UP or DOWN to set the Hours for your alarm time. When your desired Hours setting is reached, press the respective SET 1 or SET 2 to store the Hours and move to the Minute digits. Press UP or DOWN to set the Minutes for your alarm time. When your desired Minutes setting is reached, press the respective SET 1 or SET 2 to store the Minutes and move to the Set Alarm Sound Mode. In the Set Alarm Sound Mode, SET ALM SOUND is displayed. To select a specific sound to wake up to, press UP or DOWN until your desired sound is displayed. Within five seconds after selecting your alarm sound, you may adjust the volume by rotating VOLUME CONTROL clockwise to increase the volume or counterclockwise to lower the volume. Press the respective SET 1 or SET 2 after selecting the SOUND alarm to exit the Alarm Time, Sound and Volume Setting Mode. Selecting the Alarm Output Sounds: To select the alarm output sound for Alarm 1, press SET 1 until your choice of alarm type is visible on the lower and upper display areas. ALARM 1 SOUND, ALARM 1 RADIO, ALARM 1 BEEP, or ALARM 1 OFF will be visible on the upper part of the display as you scroll through the options. Press SET 2 and repeat Step 1 to select the Alarm 2 sound. Note: The alarm volume will gradually increase in volume after activating. If you are listening to a sound (e.g. white noise all night) and the alarm sounds, the alarm will sound as a beeping alarm only to ensure you hear the alarm. Checking the Alarm: You may confirm your wake up alarm time, alarm sound and alarm volume with ALARM CHECK. Press ALARM CHECK 1 or ALARM CHECK 2 to play back your selected alarm sound and display your alarm time on the clock’s display Note: The display shows CHECK ALARM 1 for Alarm 1 and C