USX Mount Full Motion TV Wall Mount for Most 42-90 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6 Arms, Max 16" Wood Studs, VESA 600x400mm, Holds up to 132lbs

I have to say, this was one of the most well-thought-out products I've ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there's no fishing around for the right part. For the record, I used this to mount a 65" TV that weighs about 50 lbs. It is definitely sturdy and can hold much more. Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE). Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible - particularly if you're mounting a heavy TV. There's just no getting around that. Use the "stud-finder" to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don't bother with the one that you're supposed to stick on the template, just use the big plastic one. You're going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You'll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it. Once you've drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don't over-tighten or you'll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you're just going to have to use common sense. Don't over-tighten these screws either, but the brackets need to be snug. Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn't move when you're trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it's much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you're done!!! Operation of the mount is very smooth, though it takes just a little bit more effort than I'd like. I attribute that to the fact that it's brand new and I'm certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It's a little pricier than most, but worth every penny. Read less

Installs easily, sturdy and great value. Works perfectly

This is an excellent articulating mount especially for the price. Seems very sturdy and installation was straightforward. I am using it with a 65 inch LG OLED and it adds the flexibly to adjust the viewing angle. If you want to install a sound bar mount that moves the soundbar in tandem with the articulating mount, buy both items at the same time because the soundbar mount (at least for a Sonos ARC) is mounted with the articulating mount piece that connects to the back of the TV. First the soundbar mount and then on top of it the articulating mount and then you lift the TV onto the rest of the articulating mount.

Very easy to assemble and great quality. We put it into a concrete wall to hold our 75” tv in the basement and it held very well. Everything you need hardware wise to put it together and up is included and it adjusts very easily. It has great functionality whether you want it further off the wall, closer, or turned in either direction. I would definitely recommend

This TV Mount is very sturdy and my handyman stated the installation instructions were very clear. The Mount moves easily and appreciated that it could be adjusted to center over the existing cabinet beneath it. My 65” TV looks great on my Family Room wall. I like it can support up to a 85” TV should I need to replace and upgrade to a larger TV screen.

This mount was easy to put together and easy to install. Perfect for my 65" TV. It's also great to turn the TV left or right and it tilts.

Sturdy and holds a 70 Vizio TV well. We did not need it adherent to the wall like some people do, instead wanted the ability to pull it away for the wall in various configurations for viewing. While it says full movement do realize that once the height is established the arm does not allow any vertical adjustment. Instead you have to drill new holes in the wall at a different height. Therefore height calculation is the most important measurement and you need to understand where you want the top and bottom of the TV to be positioned and then measure relative to where the rack will attach to the wall which is lower than the perimeter of the TV. We wanted the bottom to be about 10" up from the furniture piece where our center speaker and AVR receiver are located. We added another 3" of space that we will need to the future if we get an 86" TV as it will be larger and hang down 3" lower when using the same mount position on the wall. The bolts are substantial and required several drill bits to make the holes into 2x4's, building successively from smaller diameter to larger. If you have a large TV it takes 2 people to assemble. So study the parts and partially assembled them a bit ajread of the instructional which are so-so because you will have to predict some height measurements vis a vis where the mount arm actually attaches to the back of the TV part of the rack. Tape measure! We will collate the visible hanging wires into a black stereo wire sheath. Very good value for the price and ability to hold a lot of weight. Be careful about the mm distances at the back of your TV for screwing in the mount because a range of values is listed but the 400mm is the maximum height and the 600mm refers to the width. Ours is 400x400.

This USX Mount full motion TV wall mount is awesome! The installation was straightforward, and once up, it feels super solid and secure. The full‑motion design lets me tilt and swivel the TV to the perfect angle — whether I’m lounging on the couch or watching from the kitchen. It’s smooth to adjust and really opens up the room. Great value for a dependable mount that makes viewing way more comfortable! 🙌✨