EZARC 57 in 1 Precision Screwdriver Set

Firstly I wasn't expecting such a great product for the price, It's very nicely made the outer casing is made from aluminium and its weighty it feels premium. To access the tool bits inside there is a spring loaded button at the top, pressing this ejects the inner tool compartment around a cm from the casing giving you enough to grab onto to remove it. The inner case is double sided and stacked with tool bits 56 in total + (the screwdriver) which are all magnetic and as such stay put nicely inside, there are icons below each to give you a quick idea of which bit is which along with more detailed tool labelling stamped onto the bits themselves. There is a small sliding button at the bottom of the inner casing that pushes the screw driver tool out, the top of the screwdriver doubles up as the eject button for the inner casing - very clever design. The screwdriver is also aluminium, nice weight to it and a decent size for the small work you'll likely be doing with it, the bits lock in nicely to the driver the magnets do a decent job of securing them in place. I bought this set to replace a screen on my Macbook Pro and it had every tool bit i needed, i'm sure whatever you need it for there will be tool bits you need. If i were to leave one minor criticism it would be that the screwdriver is fairly slim which can make it difficult to unscrew a stubborn screw, they have added a grip area to the tool which is machined out of the aluminium, if it were to have a thicker rubberised grip in this area it would be 100% Regardless I would thoroughly recommend this tool set, excellent value for money and should last a lifetime of use. Delivery was fast too.

I was looking for a good strong hand screw driver with the smaller screw driver bits.i looked at a few and looked at many reviews.so in the end I looked at EZARC 57-in1 and see how neat it looked then looked at the bits that came with it it was just what I wanted.i have one like this with the electric screw driver witch is good and I will review it and I all so have a little bit bigger electric screw driver this is just a screw driver but I wanted one what was not electric so the EZARC 57 in 1 was the one for me so I ordered it.came very quick shrink wrapped all nice so I opened it and felt good then you press down and it pops up then slides out and all layed out nice all magnetic bits ( don't use on watches or clocks because of magnetic) then slide up to pull out the screw driver when I did the chrome top came off and left a bearing so I pulled it out with my nail.i thought that's weird the top cap come off at first I thought are sand the edge of the bearing and a little bit of metal what the bearing goes on glue it and put it back on and leave it two days.so I thought I wonder if this has happened to any one else so I massage EZARC and they were brilliant and they had not had this happened to any one I said it's ok are just glue it that said no your having a new one and you can keep the one you have ware the top comes off.every time I massage EZARC they got back to me really good customer support I think it's the best iv had to date.any way they ask for a photo or video clip but I did not no how to send a photo or clip getting older now electronics yes but send stuff na.Any way EZARC said its ok and they set a new one out straight away I thought they are really nice people I said they can have this faulty one back but it's not really faulty it's just the top cap but again they said keep it and a new one on its way.and I got the new screw driver and it's fine solid the top cap is not coming off .EZARC were so so nice and massaged every time I massaged brilliant customer service 100-percent.i want to say many thanks to EZARC for sending me a new screw driver and thank you for your service.i would buy from these people and recommend to any one.one more thing the metal is very strong and hard very high quality.and some really small screw driver bits.there are bigger bits but very small bits and that's what I wanted.i wanted to do this review .thanks EZARC and thanks to Amazon

So the kit is pretty comprehensive, has all the usual suspects regards bits and quite a few that I doubt anybody ever uses, all seem to be qood quality (no single use stuff) The case is aluminium, a bit over engineered for a case but it works well. My only gripe is that the handle is really uncomfortable to use, the top edge of the cap is sharply angled and cuts into my palm in use. The handle itself is very long and this doesn't help the comfort, I have big hands and even so could have done with it being a couple of cm shorter, hence 4 stars, well made, could do with some design improvement.

I love the quality and range of bits in this kit, though many I will rarely use. They’re strong, hard and inspire confidence when using. Others commented on the shaft being a little narrow, which if you look at the dimensions carefully is to be expected. There’s a knurled section lower down, the centre portion is slimmer to “spin” screws, and the top section just below the free spinning part you can apply downward pressure to the screw is shaped to allow a good grip. This is not meant for heavy duty work, rather removing mobile phone, laptop, watch and similar small electronics type screws. The largest bit is probably the Phillips 2 which is somewhat chunky but perfectly suited. My only gripe is this is the second one I ordered, having had to return the first. The bit holder and screw handle were free moving and worked perfectly. However the outer case was loose which when I received this replacement I realised was due to a minor manufacturing fault. A mechanism inside the outer case grips a plastic pin in the bit holder base, and in the first instance this was missing. Returns were completely trouble free and I had a refund within a few hours of dropping it off, which I used to buy its replacement. Fair warning, this is slightly on the heavy side if you’re expecting to carry it in a shirt pocket. That’s the price of quality, well worth it. To me it’s a no-brainer – I’m about to order my 3rd for a birthday gift 🙂

E' d'obbligo una brevissima prefazione ( con appunti personali). Dal mio punto di vista, questa trust di punte è veramente un piccolo gioiellino e come tale dovra' essete trattato. Mi riferisco principalmente al fatto che trattasi di bits minuscoli ( ma resistenti) il cui uso non si addice per lavori alquanto pesanti e gravosi. Assolveranno egregiamente il loro compito in occasione di interventi su dispositivi elettronici quali smartphone, computer nonché orologeria ed ottica. L'apertura della confezione mi ha alquanto incuriosito e meravigliato in quanto mi aspettavo di veder subito una sequenza di punte a vista, come in altri prodotti simili. In questo caso, invece, ho scoperto un accessorio ( di color grigio scuro) decisamente nuovo, compatto, tascabile e tutto da scoprire ( le sue fattezze e colore mi ha fatto ricordare i primi Palm con relativo pennino). Trattasi di una confezione ( tipo cilindro schiacciato lateralmente) il cui interno nasconde un'ulteriore contenitore che, dopo essere stato pigiato, fuoriesce a mo' di slitta. Quest'ultimo contenitore, al cui interno sono stati applicati dei discreti magneti di contenimento per i bits (per evitare la loro caduta in apertura scatola), e' suddiviso (front/retro) in 4 scomparti cad. per l'alloggiamento di un numero di punte pari a 56. Ultima chicca e' la presenza (ovviamente) del cacciavite incastonato sempre all'interno della slitta e che fuoriesce a seguito di scorrimento di un piccolo supporto situato sotto il cacciavite stesso. Trattasi di un accessorio, in alluminio (come d'altronde tutta la struttura), compatto, resistente e dotato di piccolo magnete in punta, per trattenere gli inserti. Piccola nota dolente: il cacciavite, pur presentando un'impugnatura ergonomicamente buona, a mio avviso, sarebbe stato il clou con la presenza di piccolissime sagome in gomma per una efficiente presa durante l'avvita/svita. Il sottoscritto ha sopperito a questa mancanza applicando, al centro del cacciavite, una piccola guaina termorestringente. In conclusione, possiamo dire che trattatasi sicuramente di un buon prodotto, robusto, pratico e soprattutto utile per chi ama, come me, il fai da te.

凄い商品です。 此れ1式有れば、殆どの精密部品の ネジは取れます。 強いて言えば、ドライバー🪛も 電動にしてもらえば

Na pierwszy rzut oka dobra jakość stali, bity nie powinny się szybko wyrobić. Dużo końcówek. Fajny zestaw do użytku domowego.

Ik wilde dit product ook graag hebben en dan bestel ik het bij Amazon

High quality, very durable, and has all the bits I need. Also easy to store. Doesn't take up alot ofnspace in the work bags, so nice Add to the tool arsenal