AKNES GuliKit TMR Electromagnetic Joysticks for DualSense PS5 / DualSense Edge Controller, Sticks Replacement Accessories for Playstation 5 Controller, Thumbstick Caps included

Okay, so replacing the old ones with these can be a long and hard process (first-time soldering with minimal tools). The quality feels nice and premium, with the interchangeable thumbsticks being a bonus. They sit nicely and tightly and won't come loose easily. They work perfectly out of the box and required only quick calibration. For the money, I would say they are definitely worth it! It takes some time and patience to replace them. Pros: * Work straight away after assembly. * I've noticed a small improvement in the controller's battery life. * Nice and premium feel, even after installation. Cons: * Takes time and patience to replace the old ones with the new ones. (Not really a con, but I was stuck for four to five hours and didn't have all the tools.) * The thumbsticks might become loose after changing them a few times. Do I recommend them? Yes, absolutely!

These are fantastic. There’s a noticeable improvement over standard analog sticks. Responsiveness and accuracy is great. As they use magnets and not potentiometers, there will be no stick drift. Great value for money. I can’t solder so I got someone from a repair shop who works with phones & controllers to do the installation on Dualsense Edge modules. Calibration was very simple. I followed a video from Uber Micro Repairs to advice the repair technician and to do the calibration before he finished the job.

The sticks are top quality stop all stick drift and are not that hard to install with a bit of time and patience.

Installed the sticks to my controller and all worked fine, after a few weeks one of them developed some issues but the seller sent me a new pair after some back and forth. The included KK thumbsticks rubbed against the shell so I chose to use the old factory thumbsticks instead. Some soldering skills needed, if you know what you're doing then it's quite simple.

these work really well, follow the ifixit guide with the calibration software link. worked perfectly for me. these sticks feel really nice and smooth, the included thumbsticks are good quality and the extra rubber thumbstick caps feel nice too. Desoldering the old stick is a little tricky without the proper tools as the board wicks away a lot of heat so you're going to want to get the stick area evenly heated. A hot air station would be ideal so you can take the whole stick out at once or you can use low melt solder but if you only have a soldering iron and normal leaded solder like me (don't use lead free as high melting point) then heating each of the joints around the stick a few times should get it sufficiently hot to be workable. I unclipped the pots from the housings and wiggled them until the legs snapped then cut the mounting points for the old stick and l3/R3 buttons, it's a lot easier to get the legs out of the board individually with a solder pump than trying to get the whole stick out with a soldering iron

Great upgrade compared to the potentiometer joysticks that come pre-installed in the edge, which always get stick drift again even after a couple of months, of course installation ease will vary person to person as you have to be competent at soldering, which is simple if you can follow a guide on YouTube. £15 for two being able to prevent stick drift forever I would consider a great price as you wont have to keep buying the £20 Dualsense Edge modules which are usually out of stock everywhere anyway. They fit perfectly in the original module.

Worked fine at first but one stick now not working at all😔

Great TMR joysticks. Silky smooth compared to the stock ones. I like the custom KK thumb grips. The metal finish looks cool and feels great when aiming. My accuracy on COD has definitely improved but you’ll likely need to tweak your settings before noticing an improvement. Replacing is fairly straightforward if you have solid experience soldering on smaller boards. I wouldn’t recommend attempting this replacement if you aren’t competent with the above as there’s a large margin for error which will likely result in random faults with your pad or bricking it altogether. Make sure to calibrate your sticks out the box as mine came completely uncalibrated. Once calibrated, they work a treat.

Me encantó realmente yo sufro mucho de drift! Ya le habia puesto unos joysticks de otra marca y se sentían horribles. Le di una última oportunidad a mi control de PS5 y ufff! Estoy fascinado.

Ze doen wat ze moeten doen. Het kalibreren was ook totaal niet moeilijk. Zeer blij met dit product!

Nice and good 👍👌

Works great. A bit expensive but still better than buying a new controller. The movement is smoother with this. Takes time to adjust to the joystick movement with such low resistance. Don't forget to calibrate it with the online website

Good fit and worked well