NZXT H5 Flow 2024 - Compact ATX Mid-Tower PC Gaming Case - High Airflow - 2 x 120mm Fans Included - 360mm Front & 240mm Top Radiator Support - Cable Management System - Tempered Glass - Black

This is a great case for building your own PC. I picked it up for my 11 year old son to build his first gaming PC and it worked out really well. There is plenty of space inside for components, and the layout is very well designed. It makes cable routing easy and helps keep everything clean and organized. Even for a first time builder, it was straightforward to work in. Airflow is excellent. The case is designed to move air efficiently and includes two 120mm fans to get you started. There is also support for larger radiators if you want to upgrade cooling later. We installed an RTX 5070 with no fitment issues, so there is good clearance for larger GPUs. The tempered glass side panel looks great and lets you show off RGB lighting, cooling setups, and internal components. The black finish also gives it a clean, modern look. For the price, this case offers a lot of value. It is well built, easy to work with, and performs well. Great option for both new and experienced builders.

At this price point I wasn't expecting something as good as this case. After having built in it I would certainly not be mad if priced at nearer MSRP. The build quality is there, no sharp edges, well considered wire routing and anchor points for cable management. The design comes about as close to an open-air rig as I have used which is actually enclosed. The only aspect I see as a very minor detraction is the fact that with the mesh panel placements it is impossible to hide your basement cable management. This seems to have been dealt with by way of making the rear side panel spacing a bit larger. It has been a consideration to pursue using some manner of cable sleeve, tape, or even a shrink-wrap type solution to neaten up that "shadow" footprint. Temps and noise levels are quite acceptable, build process was easy with many options, and overall, one of the best cases I have ever purchased at this price point. Would recommend.

First of all, this is a beautiful case. Nice, simple, clean and easy to build in. I have a RX 7800 XT (Reference Card) along with a Ryzen 7 7700X and 32GB DDR5 RAM. There are also 8 fans and an NZXT Elite 2024 CPU cooler. It easily fits everything I wanted in my PC. The issue (for me) in the beginning was that it specifies it only supports one 3.5 inch hard drive and two 2.5 inch hard drives. I had two 3.5's I wanted to put in there so I didn't let this "limitation" stop me. What I did was buy the "Sedna - 2.5" / 3.5" Hard Disk Rubber Stand (3 pcs Pack)". That's what you see holding the two drives together. In one of the pics you can see the drives in the bottom of my case. You just need to remove the drive cage that comes preinstalled. It's a tight fit but it obviously works. All drives recognized in Windows and the back of the case closes no problem. You can only fit two 3.5 inch drives though in the bottom. I also have a 4TB NVME drive as the main drive installed on my motherboard. All in all, this is the best case I've ever owned and the temps are nice and chilly. Even gaming the temps easily stay under control. If you have a bigger GPU, it supports graphics cards as large as 410 mm. That's easily some of the biggest GPU's currently out there. It'll be a tight fit but it'll work. Recommended.

So, when this is on sale (about 60 USD) I think it is great value. This case looks very clean, nothing particularly flashy. It isn't difficult to build in unless you really care to try to cable manage, but that is true for almost all cases. Here are some pros and cons after building in it for the first time. Pros: Size - this case is a mid tower case, it houses an ATX motherboard without feeling excessively large or too small to build in. Pre-installed fans - there are two fans installed, one for the front intake and one for the back exhaust. While buying more fans is better, having some airflow regardless is nice. Cable management - one of my favorite components of this case are the options for cable management. There are many well disguised holes to slide and hide cables through. I can completely hide cables for fans. There are trays on the back with straps to tie around cables, which makes it easy to keep cables where they need to be. There is also a lot of space at the bottom for cables from the power supply, especially convenient with cable extensions. Functionality - there is lots of space and it is easy to build in. Cons: No holes for intake under the power supply - I think this is my biggest gripe with the case. I always like to place the power supply so the fan is taking in cool air from outside the case. It shouldn't matter too much, but I think the fan on the power supply might be louder as a result. Quality is not exceptional - some paint on the case chipped pretty easily. Also, the screws that hold the metal backplate of the GPU on the case don't line up perfectly and there is a small gap between the metal backplate and the PCIe slot cover. Overall, would recommend this case especially when it is on sale.

2024 Model: Lots of space for 120mm and 140mm fans, although there is unfortunately a 3x 120mm cutout in the front that looks awkward for 2x 140mm fan layouts. Great airflow, though the PSU oddly doesn't have an option to have bottom intake, which leaves it potentially competing with the GPU for air. Most panels are easy to remove and have screw retention washers for convenience. Pretty basic I/O on the front. I'd like to see some extra USB-A or USB-C ports but for a case at this price point, I understand why they were left out. Great options for cable management as well. I like the thinner mesh design compared to the 2022 model, minimal but classy. 2022 Model: Shares most of the praise for the 2024 Model. The "toilet bowl" underside fan is an interesting choice, it's unique but unobtrusive. The front panel fan plate is a little awkward to uninstall and reinstall, but it's not a deal breaker.

This case came highly recommended on several PC building blogs and sites. After using it, I can see why. The cable management is intuitive, and the airflow is very good. I bought some extra fans and an AIO CPU cooler, and all of that was easy to install. This case made my first PC build go smoothly.

Very well designed, spacious and has good airflow. I'm glad I picked this one.

Very nice case and easy to work with. Looks great and good value for the money. A good size and easy to remove the glass cover for maintenance, it functions as it should. It makes all my lights look nice and bright.