DWIL Tub and Tile Refinishing Kit, Quick-Dry Tile Paint for Wall & Floor, Sink Bathtub Paint for Bathroom, Kitchen, Toilets, Water Based, Semi-Gloss White, 50-55sq.ft, 33oz

This refinishing kit worked wonders on my old bathtub! The instructions were clear and easy to follow, and the results honestly exceeded my expectations. The finish looks smooth, glossy, and brand new—like I had the tub professionally redone. It’s also very durable; no chips or peeling after regular use. I really appreciate that everything needed was included in the kit, making the process simple even for someone who’s not super handy. Such a cost-effective way to refresh a bathroom without replacing the tub. Highly recommend! I am kind of a perfectionist, so I ended up using 2 of them just to make sure it got COMPLETELY covered.

The media could not be loaded. I liked the tub and tile paint, I used it to paint my RV tub. I’m here to tell everyone don’t use anything else but a very padded roller brush, it comes with one but would take too long to paint tub, that small one is good for corners. I learned the hard way and tried to use a paint brush don’t do it you will use up to much paint and will not come out well. I liked the thickness it applied evenly and very durable. I love the look when it dried good price you may need two depending on the size of your tub. I bought one and wasted some with using a paint brush so I had to buy another one. Overall it works well. This was a great buy.

The media could not be loaded. This stuff is fantastic. We have done this in 2 of our shower tubs. It’s durable. Looks like a brand new shower! It’s a great choice if you want to freshen up the look of your bathroom without spending a ton of money doing it. The coverage is great. Easy to apply. I have used the light grey and the white. For the white, I have no issues with cleaning it. I use soft scrub and it cleans up nicely. It’s been 1 year since we’ve done it and it still looks like it was just done!

Totally disappointed.. to thin layer, a lot of paint lines, even layer, by the time I finished top button already been cured.. made lines..This brand has a different thicker paint - those one is perfect.. this one trash..

This was very easy to apply. Good coverage. I did 2 coats, but didn't require it. Seems to be holding up well without any chips!

The media could not be loaded. I used this on a fiberglass tub shower unit. Getting the paint into the curves was a challenge - I recommend using a foam brush to paint the curves first as the foam brush doesn’t streak as much as a brush. I used all the items in the kit and except my own foam brush. The smell isn’t strong at all. I recommend using a regular paint stirring stick or drill attachment to mix the paint well. There were paint “skin” globs on the bottom of the can, even after stirring, and the paint develops “skin” blobs while it sits between coats. I had enough paint to do 3 coats but had purchased another small 16 oz. can for just in case. I did have to use the additional can to touch up areas where the paint looked “streaky” or patchy. The paint will peel away easily so be careful when removing any painters tape - cut along the line as the instructions say. The first picture is before, then after one & two coats, then the final. It made a big improvement aesthetically but you can tell it’s a paint job. The paint has dried to a hard, semi-gloss finish. Now I will wait the recommended time to use the shower and post any updates. I can’t afford to replace the shower yet but wanted a cleaner look to match the bathroom decor.

Has the potential to do a really nice job on my fiberglass tub shower. My mistake was trying to do too much at a time. Here's how to avoid grief. The result was very good in some areas, but I got into the flow of things I left some rough areas that I'll need to redo. Here's how to avoid my mistakes.1. Follow the instructions VERY carefully. Note that you will need to apply two coats: Base coat, then top coat. To cover dark surface with white version, you may need more coats.2. If you have a large job, break it down into smaller steps. (I should have allowed more days). This stuff cures pretty quickly if exposed to air.3. Pour as much as you think you will need for the selected area into another container and add just what you think you will need for that part. Mix in the same proportion of hardener. Use a container with a sealable top if you plan to take a break.4. Apply the base coat using the supplied tools. Be careful to avoid drips. The first coat does not have to be totally opaque. Just enough to mask the background. Let that coat cure for several hours. Then apply the top coat to the same area.5. After that area has cured, move on and apply the base coat to the next area.6. After the base coats have cured, apply the top coat, one section at a time,

I have ordered this several times. Product works well. Water clean up, no smell. Let it dry 1 day before use.