







🚘 Upgrade your CR-V’s style and seal with zero hassle—because your ride deserves the best!
This 4-piece chrome window molding trim set is designed specifically for Honda CR-V models 2007-2011, offering a direct OEM replacement with part numbers 72410-SWA-A01, 72450-SWA-A01, 72910-SWA-A01, and 72950-SWA-A01. Crafted from durable rubber reinforced with a metal layer, it ensures superior weatherproofing, noise reduction, and a sleek finish. The innovative buckle design allows for quick, tool-free installation, making it an ideal upgrade for maintaining your vehicle’s factory look and performance.











| ASIN | B0DB58BB7Y |
| Best Sellers Rank | #1,680 in Automotive ( See Top 100 in Automotive ) #1 in Automotive Weather Stripping |
| Brand | ItranMc |
| Brand Name | ItranMc |
| Color | Chrome |
| Customer Reviews | 4.6 out of 5 stars 1,108 Reviews |
| Item Type Name | Weather Stripping |
| Manufacturer | ItranMc |
| Material | Rubber |
| Material Type | Rubber |
| Number of Items | 4 |
| Recommended Uses For Product | sealing windows in Honda CR-V/CRV vehicles (models 2007-2011) |
| Unit Count | 4.0 Count |
M**M
Good substitute for OEM parts.
Pleased with product. Good price especially when compared to Honda OEM replacement parts. Fit is very good, close to original, though Honda parts might have a _slightly_better fit. Well packaged and relatively easy to install. Rear window molding take a bit more time to get right. Take your time. Recommend you review various YouTube videos. Also, be sure to have or purchase some cheap plastic pry tools. Overall, pleased with results. Would purchase again.
J**Z
P&E perfect and easy install
Perfect fit for my 2018 Honda Civic EX Sedan and super easy to install
T**H
2012 Honda Civic Sedan
I watched a YouTube video to learn to remove the old trim and install the new trim. It seemed simple enough, but it was a little more complicated than the instructions in the YouTube video. Looking back, it is harder to remove the old trim than it is to install the new trim. Don't forget to wash your windows and door beneath the old trim before installing the new trim. The trim pieces do not include any instructions for installation. The pieces are individually wrapped and labeled. If you don't have one, you will need to have a plastic pry bar to aid in removal of the old trim. In the video I watched, the installer used a plastic pry bar and a screwdriver to remove old trim and broken clips. I ordered a plastic pry bar kit that included one metal pry tool and I used that along with the plastic pry bar to lift the old trim up and break the first clip. After that you can use your hands to pull the trim the rest of the way off. You will break the old trim clips removing the trim. The old trim is garbage after that. I read reviews prior to ordering and was very hopeful based on positive reviews, but also completely expected the trim to not work on my car. I installed my left rear trim piece first and was sure the one review that mentioned the clips didn't work was going to be my experience because the piece was not clicking anywhere. So after 30 minutes of struggle, I did not think the trim was going to work since the clips did not click into place as instructed in the YouTube video and the trim could be easily lifted back off the door. I asked someone else to take a look and they suggested pushing the center of the clip forward just a bit to give it room to grab under the door. Following that advice, I used a screwdriver to push or bend the center part of the clip forward. This is the part of the clip that will catch under the door frame and keep the trim in place, and after that bend, the trim did click in place and could not be moved. The YouTube also mentions that once it clicks in place it is permanent, so make sure it is aligned correctly before you clip it in place. I clicked my right rear in place about 1/4 inch too far back and it took a lot of pushing, pulling, and shoving and a lot more swear words to finally get it to slide into place and close that gap at the front of the door. Lesson was learned and I made sure to double check the fit before clicking the other pieces in place. If I'd known to bend the center of the clip out to help it catch under the door, removal and installation would have probably taken an hour. I wasted about 30 minutes trying to make the first piece work before I gave up and asked for help and then it took me about an hour to finish up, including time to clean the windows and door beneath the old trim. All of the pieces fit perfectly and they look like factory parts on the car.
J**O
Simple quality
Easy to install and makes the car look a lot fresher.
M**N
Pretty easy to install with plastic auto trim tools to remove old molding. Fit is mostly good.
Installed on 2016 Honda Civic 4-door. Functional fit, great price. Removal of the old molding seems a little daunting, but once you accept that the old plastic tabs will frequently snap off, it goes quickly. I ordered a cheap set of auto trim removal tools and they were very helpful. I recommend that you watch several YouTubes before you start... none of the videos were fully helpful, but as a group they were enough to go ahead with some confidence. The tabs line up perfectly with the car door panel with a minimum of work. The alignment of the front and back molding and the rest of the trim is a little off but overall, the trim looks good and functions well. I don't know if OEM parts would align better, but these are certainly great for the money.
D**N
Worth the money big time
It fits any civic with that year and model. I have it on my Civic looks amazing and was worth it. I went to the Honda dealership and they were trying to charge me $300 for it. It was absolutely a waste of money at Honda would recommend you to buy it here.
J**J
Fits like a glove 2015 Honda Civic sedan
Easy installation for my 2015 Honda Civic EX. I started in the rear. Take off the little plastic rear window panels for easier installation you only need a Phillips screwdriver. You don’t need to take off the front one since it’s not hindering to put this on but if you want to its also one Phillips screw to take off. If you do decide to take off the front panel make sure u slide it up so u don’t break the clips. When u slide the westher strip make sure u angle it so the Blue clips will latch on. You would know once u put it on and if u try to pull it up it will be hard meaning u latch it on right.
N**S
2018 Honda Civic EX
Great fit for my Honda Civic. Saved a lot of money. Was easy to install.
Trustpilot
1 maand geleden
2 weken geleden