KRAUS Fairlane 33-inch Drop In/Top Mount Single Bowl 18-Gauge Stainless Steel Kitchen Sink, KHT640-33

The 27" undersink mount was the largest I could fit in the 30" base cabinet (Home Depot Hampton Bay style). My remodeling contractor said these stainless steel sinks won't hold up to garbage disposal mounting. But he pick up one end to the Kraus 16 ga. sink and was impressed with the sink's rigidity and weight. Absolutely no flex.BE AWARE on a kitchen remodel with a garbage disposal the disposal's drain/p-trap did not line up the old drain rough-in which was exactly 16 inches center above the kitchen floor (not cabinet). The drain needed lowering about 2 inches at least but not too low so the P-trap is obstructed by the cabinet bottom. Helpful measurements the sink drain is about 10.5" below the undersink mounting surface (quartz). And the Insinkerator discharge pipe bottom is about 6.5" center below sink when mounted. So the height stackup (sink + disposal drain + P-trap) (10.5" + 6.5" + 2" = 19"). So drain outlet needs to be at least 19" below the counter top mounting surface (again with Insinkerator disposal). YMMV but I was remodeling so the contractor lowered the drain height about 2".Also on the 27" sink the drain opening is in the right rear so could be mounting issues as well with the placement and disposal diameter (electrical outlets, air gap pipes, etc).This sink will scratch but I want a 100% functional daily use sink and not a show piece. I will clean it in the direction of stainless steel grain - left to right in my case. And will use the included rack but not every day.Edit: After 5 mo. of use I love this sink. Yes it easily scratches but now use the included bottom rack exclusively. Hand wash dishes once per day and the rack keeps dishes dry until wash time. The drain in the right rear is excellent as stacked dishes don’t block the drain opening. Almost silent operation with Insinkerator disposal (no vibration). The 25” usable width and ample depth make cleaning bbq grills much easier. The Krauss replaces a 30” top mount twin sink that had a tiny prep sink in combo with a larger, shallow bowl sink (builder special). Totally worthless as the prep sink had the garbage disposal and the smallish main sink bowl had none. Hated that twin sink!

High quality sink with an easy-to-install template. The welds look solid, it's lightweight yet sturdy, and I think it will last for many years to come. For anyone looking for a sleek and modern looking sink at an affordable price, I would highly recommend this sink.

I've installed this sink in 3 rehabbed kitchens and they look fantastic. Be aware that they are deeper than a standard sink you may be used to, so, if you have a disposal, you must make sure the drain pipe into your wall is low enough to allow for water to flow out of the disposal and out the house. The quality of the sink is second to none - 16ga is so much more quiet and durable than the 18ga stuff contractors make standard. The extra grate, stopper and micro towel are a nice addition, too! Like all brushed stainless, just make sure to keep clean with a non-aggressive cleaner ( I use Bar Keepers Friend). I'll probably buy 5-6 more of these this year!

We love our new sink, the drain pipes lined up perfect. It drains well, it came with with all the accessories. It is a deep sink we wanted & its thick heavy stainless sink. We bought it during the Prime Sale so it was a great value for the name brand.

Like that it seems durable.

We absolutely love this sink! We’ve had it for a few weeks now and made the switch from a double basin to this spacious single basin. The quality is excellent, and it was packaged securely with a protective cover and foam—very well done for shipping.

Very nice sink

Purchased this sink, faucet and RO system. I had a very limited space on my granite countertop to install it. That was a major concern. I couldn't cut the counter so it just had to fit.... which it didn't no fault of the design of the sink. If you look at the photos you can see the thickness of the counter... 3" at least. The sink and the hold downs wouldn't work, so I removed two sides (front and right) of the hold down slots to provide some wiggle room. Lucky they were spot-welded on and I was able to remove them carefully without any damage and putting dimples on the top side. Once removed I cleaned the opening and I installed both faucets, water and RO and the drain. I siliconed the sink in place cause the hold downs were of no use. I applied the silicone liberally to the countertop BUT but should of applied it to the sink, the clean up would of been much easier.I then just dropped it in, centered it and put some heavy items in the sink to hold it in place while it dried overnight. In the morning I hooked up the lines and everything came out just right.Very happy with the sink and the quality and workmanship. Packaging was extensive and had no issues with the shipment.