iCUE Link 3500X RGB Mid-Tower ATX PC Case – Panoramic Tempered Glass – Reverse Connection Motherboard Compatible – 3X CORSAIR iCUE Link RX120 RGB Fans Included – White

Love the case! It's a great size and the fans are installed perfectly :) It did come with a lot of damage to the box, which is by no means the sellers fault, but a return/replacement was set up for the very next day and I now have the non-damaged case awaiting one final part! The cable management in the back of case was super easy thanks to the ample room and the fans are nice and quiet. Super stoked about all the ventilation too :)

Absolutely love my 3500X with the Icue link system! It's a beautiful case and I love the different options for fan sizes, I have a 140mm set for intake at the bottom front and every other slot filled with 120mm Icue link fans. The airflow in this case is top tier, I'm running a 5700X3D and a 9060XT with the Corsair Icue link titan 360 aio in this case, and even under full load on a 100 degree summer day I have never seen temps over 62 degrees C on cpu or GPU, I attribute that mostly to the airflow design of the case and the efficiency of the Icue link titan cooler. My only knock against this case is the big glass panel has gotten loose up at the top from the amount of times I have opened and closed it over the last year to clean or upgrade components. Other than that I have zero complaints, it's a beautiful case that's intuitive to build in, with cable management tie down points all over the place, several spots to put storage such a 2.5 inch and 3.5 inch Sata SSD or HDD. It's got plenty of room for even massive graphics cards and options for mounting the aio in the front or the top. It's worth noting that if you intend on doing a push pull configuration for the aio (fans mounted on both sides on the radiator) you'll want to side mount it rather than top mount because your ram will most likely gg in the way. I would absolutely recommend this case to anyone interested in building in a "fishbowl" case that's also looking for top tier airflow and cooling potential. There's plenty of room for even a custom water cooling loop, which will be my next adventure with this case

This case is easy to build with since all the panels are removable. The Icue link products are pricey, but they are well worth it. It cuts down on cables and centralizes all of your products under one controller by daisy chaining them together. All of the fans and ARGBs use a single cable type with the Icue Link. The new Corsair fans and Icue 360 Titan are nearly silent. I'm not a fan of the rubber edge covers for the wire management cutouts. It looks much cleaner without them. The cutouts are rounded off nicely so your cables and wires won't get chaffed or cut. This is the best case that I have ever used.

Make sure you know the measurements you have available for this case as it is a little large. The measurements are on the companies website. Like the headlines said this is a great and beautiful case especially for US$125 it comes with three RX 120 fans and the iCue link hub which is pretty nice. Make sure you do not let Amazon deliver as they will unfortunately deliver a shattered unit and you have to go through the return replacement process. Make Amazon have USPS deliver as it came to me perfectly not damaged on the second delivery. Tried to get the Amazon driver to take the unit back with him, but said I had to go through the whole return process. either order from Corsair directly or make sure Amazon delivers from UPS or USPS. USPS worked for me. If you receive a damaged unit and you can hear the glass moving before you open the box just contact Amazon immediately and tell them you want a replacement immediately as they tried to tell you, it will send out and it will take two weeks. let them know that you ordered this and you need it urgently and you want it next day and they will typically get it within a few days even though you’re initial order takes 4-8 days to be delivered to you. This is a great case if you’re using an RX 7900 for a GPU, and you’re using a AM5 MOBO

Got this for the wife and she calls it pretty. Decent case, and better than ones I've worked with over the years. Every panel feels well-secured but is also incredibly quick and easy to remove without tools or screws. The design is clearly well-thought-out. The segmented floor, which creates a separate compartment for the PSU, took some getting used to. Glad I got a side plug power supply, was first time using that type of power supply. However, it makes sense for providing an excellent view through the front glass panel with the power supply panel being the way it is. While the two glass panels are great, I wouldn't recommend this case for travel / LAN parties, or fingerprints, which might not be a big deal for most people. There are plenty of mounting points for fans and more than enough room for large graphics card(s). The case isn't without its tradeoffs, though. I had trouble understanding the removable place right behind the CPU back of the MB. Magnetic fan control, and one more method of connecting fans. *sigh* Securing things was okay, might come a bit loose in future. The included ARGB case fans seem to have trouble with lower speeds and occasionally stop completely, with the iCUE software, so I get it, only cool when needed, but, wife thinks it's gonna melt. The additional third-party fans I installed work perfectly. The panels are made from a typical metal thickness and feature a neat speed-hole pattern for maximum airflow. The downside is that you can easily flex the panels with a finger. The frame itself is rigid, so it's not a major issue in day-to-day use, but it's worth noting for those who prefer more rigid paneling.

I like this case .

Muy chula y elegante,espaciosa y facil de instalar todo. El unico pero que le pongo es que el icue lo alimenta una conexion molex de 6 pines, en mi caso se me quedaba la fuente escasa de conexiones,probe 3 cables adaptadores y ninguno me sirvio, al final cambie la fuente y ya funciona todo bien.

iCue対応ファンが3つついてこの価格は凄いです。 ツールレスで脱着可能だったりと、作りへの妥協もないように見えますし、ピラーレスケースとしての完成度が高いと思います。 背面コネクタに対応しているので、Corsair関連のパーツを使えば配線周りがほとんど見えないようにも作れます。 下面にファンを3機設置できますが、PCIEの拡張スロットはモノによっては塞がってしまうので注意というくらいです。

I wanted to try a glass case with minimal bezels and this one does not disappoint. There are many options but I have always like Corsair cases, especially any in white. The panels are all really easy to remove and replace as they all slot in and the bottom and push fit back in (no screws needed). I chose the model with the fans and controller as it was better value getting them together but you can install any fans in there. The negatives for me are the lack of space in the PSU area, if you plug in all the power cables into the PSU before fitting, you should be fine, otherwise it can be a pain to get them in after due to the angle and lack of space. The back section is also limited on space once you have all the cables plus multiple fan controllers/power hubs (I have the old corsair fan controller as well for my other RGB fans). Overall, I love the white finish and how visible everything is at the front and side. Plenty of space for decent size graphics cards plus all the fans you will ever need.

This is such a beautiful case. Very easy to put together! I wish there were paper instructions instead of a qr code but the code works and I was able to understand and follow the online instructions because I had a device with an internet connection and camera, my phone. If I hadn't had a phone or tablet, it might have been difficult, but I'm sure public libraries can scan qr codes for people or at least offer free internet and printer so people with no other machines or internet access can print the instructions from the pdf but the qr code is on the box, so you either need to tear off the panel with the code or bring the whole box to the place with qr scanners and internet. This might be someone's first computer and first device with internet so you need another device, which is costly, to give you the instructions to build this case. Keep this in mind before you buy this product, that it requires a qr code scanner with internet connection to read the manual. Other than this specific issue and case scenario, it is the nicest computer case I've ever used. The panels have an extremely satisfying pop when you push them on the chassis. Be careful with the heavy solid glass panels! They are supposedly tempered glass but even tempered glass will break in the right conditions, and although the edges seem to be polished smooth to avoid cutting things, it's still gonna punch through some things if you accidentally drop it on its corner or leave a bruise or scrape if you bump into it with the same force needed to get visibly injured by wood furniture, since it feels as tough as maple wood or oak or more like a marble slab that's transparent, quite heavy panes of glass! Use blankets or clothing or the soft packing materials to cushion the glass when you take them off or before you put them on. The icue system is very easy to setup and the fans connect with side-by-side connectors. There's reverse motherboard support, too, which is cool.