KC604

This thing works pretty good. It won't catch superfast inrush rise times or anything like that, but will once it starts hitting 100ms+

Excellent multipurpose digital meter. Easy to use. Great display. I used it to check the parasitic battery draw on my car. The clamp on amp meter read below 50 mili amps at times. I found the min/max function to be very useful. The zero reset function is a must when reading current this low. Awesome feature! I wish it had a way of monitoring longer than the auto ten minute shutoff feature which saves the batteries. Right on accuracy with my other digital meter reading DC voltage. I highly recommend this meter.

First impressions after 2 weeks of use. This meter does almost everything I need. Voltage and resistance readings are spot on. Capacitance readings seem accurate down to 10 pf. AC RMS voltage readings seem accurate. The ability to hold peak readings is a nice feature. The main limitation is current readings. AC current readings seem reasonably accurate (of course you need to place only 1 wire in the clamp. However DC current readings (in the 100 mA range) were inconsistent even after nullify out the stray magnetic fields with the "zero" button. Unfortunately there is no direct way to measure mA currents using the probes. (In one case I just put a 1 ohm resistor in series with the circuit and measured the voltage. As long as the current is less than 1 A, a 1 W resistor should suffice.) The auto power off function is nice, but the only way I found to turn the meter back on is to turn the function knob to "off" and restart. I found the thermocouple useful for checking the temperature of a power resistor. (I had no idea that they could hit 130 C while operating within their rated power!) All in all, I would recommend this unit for an advanced hobbyist.

This Kaiweets HT206D clamp multimeter is great - I love it. For $48 it is a best buy. {{It competes well with my several hundred dollars Fluke multimeter. My biggest issue with Fluke is their probes are outrageously priced, but their meters are excellent.}} I have tested all functions, and it works very well. The clamping ammeter is a real plus. This is now my go-to meter for everyday projects. I like the fact that it uses two AAA batteries. I hate rechargeable anything and avoid them like the plague they are –always discharged when you need them most and you need to wait to recharge them. Not this meter – just slip in two new AAA batteries and you are good to go. Half the leads (mainly the fine pointed ones) that come with the meter, however, are crap and so is the optional Kaiweets 23-piece multimeter test lead kit. These have connectivity issues with either high ohms or ohms that continuously jump all over the place. They are held in place via a crimp and the conductivity is awful. The Kaiweets vendor replaced the 23-piece kit for me, but the replacement had the same conductivity issues. Save yourself time and aggravation, get a good lead set for this. I wasted a few weeks thinking the meter was bad when it was bad probes. These are the probes I ultimately settled on as excellent for this Kaiweets clamping multimeter: the Snakol 22-Piece Multimeter Test Lead Kit and the Bionso 25-Piece Multimeter Leads Kit - both at about the same price as the malfunctioning Kaiweets test probe kit. The main difference is the Snakol has longer probe handles which I like. I am using both sets, however. All the probes in these two sets have great conductivity and no issues and they fit the Kaiweets HT206D clamp multimeter. They give stable readings of 0-to-0.1-ohms. The main issue with these, however, is the probes need to be screwed into place with a wrench or needle nose pliers making changing probes more difficult. On the other hand, this is likely why they give such good conductivity. However, you can buy multiple sets so you can permanently set up the probes you use most frequently. Some of the other probes in the set are the plug-in type so they be changed easily and these have excellent conductivity as well. I find these two kits give me all the probes I need and more.

Just what I needed to diagnose a problem and convince my peers that I knew what I was talking about. Good product, good value, prompt shipping.

Ordered because I have a customer that wants amperage readings on all his trucks every service. Compared to a $400 Fluke. Readings are identical. Well worth the money! Display is a bit small but readable.

Stämmer i mätvärden på spänning o ström mätning. Bra pris.

Excellent product Excellent service arrived in 2 days of purchase

使いやすくて、コスパ良し。

Facile da usare,basta avere una po' d'infarinatura della materia . Corriere consegna con rispetto sia del pacco che della proprietà...

良い点 ・常用できる精度 悪い点 ・前回使用したモードを記憶してくれるとなお使い勝手が良いのだが