Low Profile Boom Arm Mic Stand, Microphone Stand with Cable Management Channel, Desk Clamp, Screw Adapter for Streaming Podcast Recording, Adjustable Metal Mic Boom Arm Pink-BM88P

This microphone book arm is great. Here is why. Quality of Materials: almost entirely metal, which is what you want. Only the underside of the arm is plastic for cable routing. Sturdiness: the sturdiness great and fully adjustable with the wrenches included. If it loosens just make it tighter. Very functional. Should support heavier mics Setup and Mountability: easy setup, easily mounted. Just make sure your desk fits the mounting requirements before purchase. Motion: The swivel works well so you don’t have to worry about moving the possibly more delicate joints as much. Functionality: should give great sound quality when paired with a good mic and shock mount. Fully functional for use. Cable routing is great Overall a great mic stand and worth the money.

If you're looking for a boom arm that looks flush within your setup and has good moveability, then this is the one. The setup is super easy, and the build quality is premium since the arm is made of heavy metal. There is also cable management, so you can easily tuck them away for a cleaner and more cohesive look. It's also easy to adjust and swivel the arm to whatever height or level you need. Overall, highly recommend.

=Intro= I have this Boom Arm attached to a Fifine AM8 for casual communication uses as I am upgrading my audio set-up to have a dedicated mic and headphone solution as opposed to a headset/mic combo, as the mic on my current headset is failing. =Aftersales Support= Originally when the arm came, the hand screw piece that clamps the mic down to the arm broke after I tightened it. I then reached out to Fifine Support [Rosie] about the issue, and after a few days, I had a brand new hand-screw part in hand at no cost to replace the old one, which now works and does not suffer from the same issue, so thank you for good after sales support on that. Now, as for the boom arm. =Physical Specs= The arm itself extends to a total length of ~28 inches, not including the length of your mic, which I feel is ample to position your mic roughly ~5 to 6 inches from your face even from a laid-back posture, if you were all the way pushed in to your desk. You can tighten the joints of the arm with included hex wrenches. I have not tested the tightness of the joints after tightening as that's not my use-case. The clamp itself has a very small desk footprint, taking up about 2.5 inches in width, and 2 inches in depth on the desk. The ball joint for adjusting the mic at the end of the boom arm is a bit finicky to adjust at first, as one clamp is responsible for adjusting the mic left and right, and also up and down. Luckily, the aforementioned hand-screw makes tuning this a bit easier. I've got it tightened to a point where I can adjust it with some force while tightened, but the mic still holds in place. =Cons/Feedback= Something that I wish they had added is the ability to drill the boom arm into your desk as opposed to a clamp, similar to a monitor stand. It's hard for me to tighten the arm entirely due to the clamp's position on my desk. This does not seem to be a common concept amongst other boom arms for some reason. Also, instead of a long hand screw to tighten the clamp from the underside, it would be nice if it was a cross-style or T-style hand screw so it would be easier to tighten the clamp in tight spaces [i.e, between desk legs and a drawer which is where my clamp is]. I'm not entirely sure if this is due to me over-tightening it, or adjusting it while tightened, but the ball-joint's powder coating seems to be scraping off a little. This doesn't seem to affect the functionality of the mic as a whole, or the overall general appearance, but just something to note. I do feel at times the clamp or the socket (unsure which) where the arm where the arm connects to the clamp is a tiny bit wobbly if I brush it with my arm, but I would say is stable at the end of the day. =Price= I got it on sale at ~40$, however even at MSRP, this is a solid buy as a beginner level boom arm. It holds my mic in place, pushes away easily when I don't want it there. Most other boom arms start at ~70$ from the research I had done from more established audio companies [Shure, Rode, Elgato, etc] for a hanging boom arm, with low-profile options costing more. I definitely feel like that this is a very competitive pricepoint for this boom arm.

For the money, this is a very good microphone arm. Easy to install took maybe 5 minutes tops. Excellent stability while still being able to move the mic position or swivel it completely out of the way. The low profile design is great for my setup since it doesn't block my side monitor like my previous arm did. Seems like it should be compatible with a wide variety of mics out of the box with the included adapter. My Shure mv7+ screwed right on without issue. Also very impressed with the nicely weighted base clamp that attached to my desk very firmly with zero wobble. The cable management built into the arms is also well designed and easy to route through.

Its solid. Just got it so I cant speak on the longevity but its very sturdy, easy to assemble took me 2 minutes to set it all up. 0 squeak or noise at all. Plenty of Adjustability for my discord-mained mic. I'm by no means a pro with this stuff but for the price its a good pick. Cant go wrong with it. low profile with barley any branding. very sleek and unnoticed. Fifine has gone 0-hero in the last few years. 5/5 stars so far

I’ve had the low profile Elgato boom arm since launch, and from day one I wasn’t happy with it. The cable cover was trash. You adjusted the arm once and the cover would pop right off. Drove me crazy. I stumbled across this FIFINE boom arm a few days ago and immediately liked the look, but I was skeptical. I’d never heard of the brand. I read a few reviews, watched the price drop, and figured the price was low enough that I wouldn’t be mad if it didn’t work out. Turns out this thing is easily better than the Elgato. Like, not close. The build is solid as hell and the design is clean. It’s holding my PodMic with zero issues, but the real win is the cable management. The cable cover actually stays in place. It just works. That alone was worth the money. At regular price, this is a solid buy. If you catch it on sale, it’s a no brainer.

Se houvessem 10 estrelas eu as daria!!! Produto excepcional!!! Vale cada centavo pago!!! Muito resistente. Se eu tivesse que dar algum ponto negativo, seria não ter o primeiro braço com articulação vertical....mas isso tem a ver com o modelo, portanto....perfeito!!! Podem comprar de olhos fechados. Sem contar (embora, pra mim isso nem é tão importante) que a embalagem é simplesmente um luxo!!!! O produto é muito excelente! Até no manual que o acompanha! Tudo muito caprichado! A marca ganhou um cliente!!!!

Realmente es una muy buena opción; el soporte es de perfil bajo, te permite ajustarlo de diferentes maneras, así como esconder los cables en su interior.

I bought this arm along with my fifine tank 3 mic and it was very compatible, the arm's material was very premium, it did not feel cheap at all, it had an amazing cable management tunnel that made my desk look very clean and overall it's very flexible, and installing it on my very thick wooden desk was perfect, it absolutely stays in place and doesn't move an inch unlike my previous mic arm.

Pros: Does the Job. Moves freely but with some resistance when screws are tightened down. Doesn't feel sloppy (at least out of the box, time will tell) You can tell its not 200 dollar Boom arm but in day to day use it doesn't seam like it will make a difference. Looks reasonably clean. It it just a single bar design. The logo on the front is a bit in your face but if you view the pictures I added you can see that I removed mine and it looks much better. Excellent mounting versatility. The thread adapters fit my microphone perfectly (Elgato wave 3 with gimble mount) and seams they would fit most any. Above all it can be mounted upside down to the bottom of the desk and the clamp can be removed to allow it to mount with a screw. The stand off that the boom arm mounts to is hollow with a flange at the bottom that works well with heavy thread pan head screw. Functional easy to use cable management. Covers slide off and your cables can be laid inside. It is big enough to fit both my headphone cable as well as Microphone cable. Cost. Its cheap and still will deliver the desired performance of most any recreational gamer. Cons: Ball mount to the microphone has limited range of motion. If your boom arm is at a downward angle, coming from the side of your desk, mounted on top, it can not be adjusted to bring the microphone all the way back to vertical. If your microphone does not have a side to side adjustment it will sit at an angle which is more then anything aesthetically annoying. you hopefully will be able to adjust the mounting location in such a way that its not an issue. Does not seam to be an issue when undermounting the mount. It also sits a fair ways off the desk. If your monitors are less then 4 1/2 inches off your desk the first segment of the boom arm will not clear them. I included some pictures of how I set mine up. Decided to write a long detailed review because I was surprisingly pleased with this product and hope be helpful to others in choosing their products.

Good product