RackChoice 3U rackmount Server Chassis Support Liquid Cooling Compatibility up to Elevated 360mm Radiator Support SFX PSU/ATX/MicroATX/Mini-ITX MB

Great case with solid build quality and a clean exterior design. I bought it specifically to accommodate a full-height GPU (or even multiple GPUs) down the line, and it delivers. The Arctic Liquid Freezer III Pro 360 fits without issue, even with its massive 398 mm radiator. I’m only using onboard NVMe storage, so I removed the hard drive cage, which freed up even more space. While the drive cage placement near the PSU would make HDD installation a bit tight, it still looks workable. With a micro-ATX motherboard installed, there’s plenty of room for airflow and overall the layout feels very well thought out. The only thing I wish it had is a USB-C port on the front. I may try to retrofit one myself in the near future.

Most of the other server cases I looked at that claim to fit an ATX motherboard position the PSU in a way that the last few PCIE slots are obstructed. Not sure how other cases can claim to fix a full atx mobo. This case actually fits the ATX motherboard due to the sideways PSU placement. Make sure you have an SFX (small form factor) PSU as it doesn't fit a full size ATX PSU. Perfect for what I wanted and I had the SFX handy. I wish there were a few more options out there that really actually supported ATX without sacrificing PCIE slots. This one was a bit expensive but was the only option I could find. Comes with all the screws needed. Comes with 3x 120mm case fans which I didn't bother to test. They just looked noisy. I replaced immediately with some noctua fans. Space for 2x 60mm fans in the back and Ill probably order some noctuas as well. Single internal cage that looks like it could fit a few hard drives but I just have nvme directly on the mobo so I dont need many. Its just my firewall box. Material is sturdy and heavy steel. Packaging was good and the case had no damage. Aesthetically it looks good. Might buy again if the price comes down - or Ill just start buying MAXT boards with cheaper cases.

This is a great case overall, but with some caveats. It's not excessively big, and not too deep which is good depending on the enclosure you're putting it in. My main complaint is that I bought an SFX L power supply, which this case does support... however it is SO close to the hard drive enclosure that any power cables would be alarmingly cramped... so cramped in fact that I decided not to use the enclosure at all. I bought some SSD brackets that fit into empty component slots so I could place them elsewhere. My pictures aren't fancy, but I have highlighted where the hard drive enclosure would be IF I was using it. Its a big of a waste, and if I needed to use a standard hard disk I'd have really been in trouble. My only other complaints are that the power switch is not recessed or protected in any way making an accidental press a real possibility. Also, the fans are cheap. I replaced mine with PWM fans. Otherwise this is a nice and very sturdy case. Overall, I'm happy with it... if you are considering this, my best advice is to be sure you get a small SFX power supply. Aside from that, you'll probably be ok.

Plenty of space, worked well with a 360mm 3 fan radiator. Used an SFF power supply and an ATX board. LP video, SSD bracket, and SFP NIC fit in the slots well.

Installed asrock mATX b660m rs pro mb with 12900k, ARCTIC Liquid Freezer III 360, and dual rear Bgears b-Blaster 60mm fans. 3x 2.5" sata SSD's in PCI brackets, 1x 3.5 sata in PCI bracket, X520-da2 nic, PCIe to u2 1.6tb nvme drive, 850w SFX power supply, 4tb nvme m2. Run aio and vrm fans at 100%, and rear fans turn on 50*c. Near silent operation. Server and 12900 run cool at 50 to 60*C under FULL LOAD (4.9ghz) for over an hour (after 5.2ghz timeout). Love it uses SFX to allow more in case space! Very good front to rear air flow with no crazy top case holes to plug (so server can be stacked in a rack). AIO was a bit wider than others i guess, so i had to remove 1 front USB plug to make room for the AIO rad. Wanted the 12900k to run at full (and cool, so no thermal throttling) when needed in LESS than 4U - and this case allowed that. photo was taken before sata drives connected. hope this helps someone that is building!!!

Price is reasonable looking at the quality. This isn't a Corsair case but if it was it would be double the price

I wanted a rack mount case that supported liquid cooling and this case delivers. Not a lot of extra room but it works.

Thought I could squeeze a normal PSU in it given I have a 2U that I just ordered that I can... I should have paid closer attention. Oops. Aside from that however, they have a filter... THAT YOU HAVE TO OPEN THE CASE UP AND DISASSEMBLE FROM THE INSIDE TO CLEAN (which in itself is even made more complicated with 1 screw being located on the bottom of the case)! I have to seriously question the logic of the designer here. This alone makes the thing worth returning. Pros: It looks sharp and feels well built. Unsure: There's 8 available slots in the back, because you know, you only need maybe 3. (Would have left room for a proper PSU)

Really Nice and Works as intended but should have been more clear on the PCU as it said SFX PCU but Before buying I had no clue what an SFX PSU was and they are stupid expensive compared to a regular Full Size PSU... It is all my Mistake in the end but I would say look up the Cost of the SFX PSU before and compare the additional cost and difficulty in finding to another Server case that takes a generic full size PSU..