K&N Cold Air Intake System: Dry-Flow Air Filter, Increase Performance & Towing: Compatible with 2018-2025 JEEP, Gladiator, Wrangler, Wrangler JL, 30-1576

Love this CAI. Quality product and easy to install. The sound is much better than stock with a little more giddy up. MPG seemed to go up also.

I have no mechanical experience changing anything out. I took a chance, and with the help of a few YT instructional vids, I was able to change this out. I am so happy with this install! The directions it came with were ok, but the videos found online helped more. Make sure you have all the right tools. You'll need: Trim removal tool Flathead screwdriver Adjustable wrench Sockets 10mm & 8mm Torx bits: T30, T20 Allen head: 5/32 Adaptors may be needed for the sockets Removing the old air intake was one of the main challenges I encountered. I had virtually no issues with installing the new one. Challenges were (I have a Jeep JL): Removing grill without scratching it on the aftermarket front bumper (I only had about a 3/4 of an inch gap to work with). Removing air intake air temperature sensor while being careful with it. Overall, I am very happy with this. It also makes my Jeep sound way better and a little meaner.

It looks very good good construction, easy to install you feel the difference sounds very nice.

While I didn’t get any perceivable change in mileage (wasn’t expecting any), I did get a great sound and maybe a touch more power at the high end of the RPM range. Install was easy although the instructions could have been better. The air temp sensor fitting is not good though and I get a check engine code once ever 500 miles or so. I push it back in and it clears only to repeat itself again. Edit: Check engine was do to the fan failing (at less than 10k miles). CAI is great and I have had no issues 20k miles later.

Was a very easy install, took about two hours by myself. I’m not super auto inclined but the instructions were clear. I did end up using a YouTube video to remove my 2024 gladiators stock intake. But the instructions to assemble this one was fine. I love the way the stainless steel looks gives it a more aggressive sound for sure.

I installed this today and it took me about an hour. Would have been quicker but I was in and out of the house grabbing tools and coffee. The good... 1. Install is easy if you have the right tools and read the instructions, Youtube videos exist so if you need more direction just google Jeep Gladiator K&N Cold Air Intake Install. 2. The motor growls when you hit the throttle! I do not want the full sound of an aftermarket exhaust but the stock intake makes no sound at all. If you are looking for a nice growl without being obnoxious (IMO) this is the way to go. 3. Throttle response is noticeable better but not sure how much of that is associated with the sound, it could be a Jedi mind trick. 4. This is handmade in the USA!1 (according to the box) The bad... 1. Other brands do not require you take the grill off and remove the air inlet tube behind. This is not a big deal if you are familiar with removing the grill but it still adds time to the overall install. 2. I have had other vehicles with CAIs and sometimes at low rpms they can feel sluggish. Overall they add HP and I believe they are worth it but it is something to keep in mind. I still rate this as 5 stars despite these very small issues.

As far as I am concerned- Typical K&N-good products, built well, and does what they say it would. Very satisfied with it.

This is probably the 5th KN intake I've purchased in the last 12 years or so. Never an issue with install or performance. They got this one wrong though. Heat index on Saturday was 112 and the engine compartment was hot as well. All went well til the end. 1st, there were missing parts, which they have Fed Exed to me, but the issue has to do with the temp sensor install. I also give 1 star to Jeep because to remove the sensor, you turn it counterclockwise 45 degrees and wiggle it out. Nope, didn't happen. I called KN about the missing parts and also spoke to their tech about the sensor and also looked it up on U tube. Well, I twisted and turned and pulled on it until it broke ( new one is $35 at Advanced Auto parts). I installed the breather tube after receiving a replacement from KN. The major issue is the tube from the box to where it connects to the intake has a hole in it for the sensor to fit in . NO WAY will it work as compared to the OEM tube. Maybe Jeep changed the way the sensor fits the tube that KN doesn't know about. The missing grommet they sent me didn't fit the hole and I had to slice it 3/8 inch to get it to fit the hole and then the sensor still doesn't fit. The hole in the OEM tube is entirely different from the KN tube. Guess I'll just duct tape it until I can figure out something else and stare at my check engine light. Other reviews made no mention of this problem. My guess is Jeep changed the design and if they did, KN needs to come to the dance and figure it out. My Gladiator is a '21. Gonna check with other Jeep owners and look at their intakes, Either way, I'm pissed. At least it's working.

Inmediatamente después de instalarlo se sienten los caballos extras y por supuesto que el sonido que emite está fregón! 👍🏻

Easy install, looks cool, small hp gain.

I like the performance of the K&N cold air intake thus far. Cannot say it has given much better fuel improvement but it definitely improved the torque and HP, not to mention the low growl that comes out when you accelerate through the gears. The instructions could use a bit of improvement because the tolerances are so close one has to use alternative measures to get the box inserted into the rubber boots under the box itself. Also registering the unit through K&N was seamless, albeit still waiting for a response...Would definitely recommend if you have a Jeep and are running a 3.6l engine.

OMG WHAT A DIFF … mileage has improved I feel the torque diff as well as the HP. And the sound wow it sounds mean deep throated. Great purchase.

It doesn’t have sensor spot i had to make one by my self to fit the sensor in it!!!