Craft Resin1.5L Crystal Clear Deep Pour Epoxy Resin Kit - Food Safe & UV Resistant Best for DIY, Art, River Table, Wood, Flower Preservation, Mould Casting Resin Epoxy Kit - for Beginners & Pros

I bought this to fill some cracks in a wooden cake stand i was making for a wedding.I added colouring to my resin, so i can not say how clear the final result would be, however the final results i had with it were great. No air bubbles, easy to mix, add colour and use.The resin once mixed had a good long working time, i found that after 1 hour the mixture was thinking up, but i was well done with my resin pour by then.I found that using plasticine to made dams whilst pouring the resin worked well and did not harm the hardening process of the resin.After 9-12 hours the resin was very soft and could take a finger print when pressed. After 24 it was fulled cured.Once fully cured it was easy to work with, cutting tools were fine with it, it was easy to sand and came up very nice when using hight grit sanding pads. You can get. Loverly shine with it.I am defo going to use this product again for more word working project and i have several things in mind for crafts and miniature model too.

Bought resin to make a large lazy Susan. Worked perfectly and dried exactly to specification. Very easy to use and mix. Followed instructions regarding mixing and at first I was concerned that it wasn’t going to clear but at the 5 minute mark it went crystal clear and was ready to pour. Ended up with some bubbles but that was entirely my fault as I was pouring onto glued down beer caps which had some air under them but actually I love the bubbles as it reflects the fizzy nature of the project.

Worked perfectly, very impressed. Bit pricey but seems compatible with other products and worth it for the brilliant result, thank you

Craft Resin is my preferred brand; I’ve used several over the years, and this is consistently a good performer. I use this for my deeper pours, and the 1:1 for shallower projects. Good amount of working time, good viscosity, low/no smell, good/relevant curing time (this one cures slower than the other), crystal clear, very few (if any) bubbles (just be sure to catch the bubbles where air gets trapped around the edges etc).

This is the first deep pour resin I've used and I have to say I'm a bit worried at the time it takes to set up and cure. I've been using all different brands, usually buying the cheapest one at the moment. I've not had any problems with any of them, I just became used to the quick curing time. I'm making a round table top with dried flowers and I keep checking it and the resin is still fluid. There aren't any bubbles but I have to pick out the occasional bit of lint or hair. I'll have to wait and see how long it takes to cure because I have to pour another layer and I have another table top to make.UPDATEThe table top cured and hardened overnight. It's crystal clear and I couldn't be happier with it!!

I have used several resin brands in the past and first tried this brand from Amazon a few months ago. The resin is relatively easy to use, the only problem is common to all resin, in that it needs care in handling and accurate measuring of the resin and hardener, so is not simple to use. Compared with other brands I have found this produces a remarkably clear material , setting within 24 hours. The basic 500ml pack contains protective gloves and a branded stirrer, which is very useful. I don’t buy larger sized packs as I found in the past that opened packs deteriorate and I now only buy what I can use within a month of opening. I will continue with this Amazon brand. It is good.

Really good easy to work with.

I have tried using this on 3 occasions and each time, I have so many bubbles that its almost impossible to get rid of them. Deep pour resin should be close to the viscosity of water but this is far too thick. I have tried leaving the resin containers in warm water but its still has thousands of bubbles.It does however cure very solid and is fine if you want to do black rivers or rivers with rich colors, but if you want to do transparent rivers, a strange mist occurs after about 18 hrs of curing which you cannot get rid of. Its a shame as I have excellent results with the table top resin from the same company.