DEWALT 20V MAX Cordless Impact Wrench, 1/2" Hog Ring, High Torque, Brushless, Bare Tool Only (DCF961B)

The DEWALT 20V MAX Cordless Impact Wrench is a robust and efficient tool that delivers excellent performance for a range of fastening tasks. Its combination of power, control, and durability makes it a valuable addition to any toolkit. While the initial investment may be higher, the tool's reliability and features justify the cost for those seeking quality and performance.

Pretty expensive but it is made very well and is very durable. The torque on this thing is unreal and this is a game changer when you need that extra little bit of work. Doesn't go really hard on batteries and I have found more purposes for it and I can imagine. DeWalt really killed it on this one.

Always used air tools but decided to try this out due to having other Dewalt tools/batteries. Was really impressed by its torque, battery life, and quality. It’s also nice not being connected to an air hose and its size is enough to fit in tighter spaces but not too small to not feel cheap. Overall this works really well.

Works well, is a good bit heaver than the dcf899 for sure but got this since it finally broke, the shaft that goes from the planetary twisted into a spriel shape and can't be used anymore. This does seem to have a lot more power to it and weight as mentioned before, also definitely a little more of a hand full when trying loosen something really tight, mainly glad for new battery dampening and grip or sure would be a lot worse in the hands. But saves a ton of time and effort getting all the bolts out easily and quickly, battery life also depends on battery's, seems to so far like the powerstack batteries but will last a long time with no issues on a normal 4ah one to.

I’ve had this for 2 days I got to use it at work is all so far. I bought this tool only then a 8 amp hour powerstack that was on sale for it and so far been very surprised. I’ve been told nothing but to be careful and that it dumb to use it for taking wheel ends off trucks (I work on semi trucks and trailers a lot of tires and brakes) but I wasn’t worried and figured if I use it enough right away money back within 30 days dewalt says. So far out of 14 different wheel ends between 6 or so different truck or trailer’s I’ve had 4 lug nuts on one trailer it didn’t want to take off on one wheel end. Took all the others off and few them didn’t think where coming then did but 4 did not and even our normal 1 inch Ingersoll Rand air gun wouldn’t budge it had to use the one that’s like twice the weight but still 1 inch to break them loose and even that struggled. I didn’t even give up with the dewalt though I sat on one the lugs after I got all other 6 off and held the trigger for solid 2 minutes or more before it over heated and shut itself off and would let me try after a few seconds then shutoff again until it acted like it was dead and I couldn’t even tould the metal part of it . 3 minutes of that later I held it on there for another 30 seconds before I got the air gun because it was smelling like burnt electrical . Snap on can lick it. Only complaint is the metal is obviously like cast aluminum and pretty soft be careful you don’t have any part of the tool resting on part of anything you impacting on you’ll tear it up easy or pinch your hand thing eats. I’ll update this review in a month or more if it don’t break by then.

This thing is a beast. It makes easy work of getting lug nuts off a car. Once they get loose the driver slows down so the nuts don't go flying off. It has a few different torque settings for jobs requiring such needs. Well made and heavy.

Overall, I think this unit is going to pretty much take down any obstacle. It has three impact settings (1,2,3) as well as a mode that will stop impacting quickly after meeting sufficient resistance. I used it, so far, exclusively on setting 3 (MOAR TORQUE!!!) for removing and installing lug nuts. For this job, it is overkill! It makes short work of any comers. The unit is bulky and weighty, but it also is able to take a licking without issue. I accidentally dropped it from the top of the bed of my truck (about 4.5' from the ground), and it bounced of the pavement without anything but a light scratch on the aluminum housing. If you're working it, it will eat the batteries, but I did a full tire rotation on two vehicles and it used little of my 6 amp-hour battery (afterward, I put it in the weed trimmer and made it through most of my yard before I had to swap batteries). Sockets can be a slight pain to secure to the chuck, but it also holds them reasonably well without being frustrating. The only thing that I do not like about it is the impact application. It is surprisingly jumpy when impacting. Compared to its main Milwaukee rival, it is downright crude in this respect. It jumps enough to cause pain in the wrist holding it, and that is simply not something that has ever happened with big red. Don't get me wrong, it will definitely knock things loose, but you're going to feel it, too. If you have the DeWalt tool ecosystem, get this! But, if you also have Milwaukee tools, then I recommend the competing product over this one.

Llevo tiempo trabajando con herramientas Dewalt y ninguna me a quedado a deber, está pistola de impacto de verdad es increíble, no hay birlo o tornillo que le haga frente, es una bestia imparable a la hora de hacer su trabajo, no cabe duda que vale la pena cada centavo invertido, adquirí la batería aparte y ya con todo pesa 4.3 Kg de puro músculo, recomendado al 1000 %.

ممتاز للبراغي يجب الانتباه الى انه ثقيل مناسب لمكانيك المعدات الثقيله

Just WOW!

Works awesome, just need to make sure you got a full battery or a mostly full battery to maximize the breakaway power.

This thing is a beast. Becareful with it. Shredded the threads on a m18 bolt.