TAKIMO 1 Gallon 3× UV Resistant Epoxy Resin Kit - Ultra Clear Non-Yellowing Formula for Art & Furniture - High Gloss Table Top & Coating - 1:1 Ratio, 128oz

Good stuff. What you should know is when mixing don’t fall short of the 5 minutes. And if you’re mixing more than a gallon make sure to add at least another 5 minutes stir time. One direction. Bubbles come out easily with heat gun. No smell. Don’t brush. Fast tack free. Just let it get there. Fingerprints aren’t easily removed. Crystal clear. Durable.

I'm a convert! This stuff is fantastic! By convert, I mean that I used to exclusively use Envirotex for all my resin needs (i'm an artist). Compared to Envirotex, Takimo's Resistant Resin has many preferred qualities: with a 1:1 ratio, It mixes fast and easy with a bare minimum of bubbles, its cure time seems to be faster than Envirotex, and most important (for me, anyway....) is that it DOES NOT TURN YELLOW over time. It's also even more odorless than Envirotex. Once mixed, it becomes the consistency of say...corn syrup (but please don't taste it!)--it's not too thick and it's not too thin. Once poured, the clarity of the resin is crystalline. Whereas I would usually have to spend time 'de-gassing' poured Envirotex by either breathing on it or using a torch to release the bubbles, no such after process was needed with Takimo's Resin. If mixed and poured properly, the product is superior grade and cures in about 72 hours time to a durable, bright and crystal clear finish. VERY fast shipping. Would order from -- and probably will--again. Thank you, TAKIMORE! Great stuff at a decent and competitive price!

Excellent, Excellent, Excellent, this will be my go to epoxy brand from now on. Poured this on a 9 foot dining room table and it came out like glass. No bubbles, good working time, and faster curing time than other brands ive used in the past. 10/10 recommend. Thank you Takimo!

Works great and sets up nice. The pumps that come with don't dispense easily so I ended up just pouring. It had more bubbles than I expected but a bit of flame took care of them. I like that it set within a couple hours so I could do have pigment layer with a clear top layer.

Very good epoxy, clear, easy to use, get hard in couple hours or so, used for fiberglass model and it worked well.

First time using this brand and was let down big time. I followed their directions and did my normal prep. Im very methodical about every client piece I make. I cleaned the boards and they sat for about 45 minutes before I poured the epoxy. I mixed it with a paddle on my drill for 3x as long as I have with any other products waiting for it to clear up like the instructions say. I even let it sit probably 5 or 10 minutes to let bubbles surface. When I poured the test panel, it went down clear and leveled well, so I went ahead with the main project. As I poured it, the epoxy laid down ok, not as slick as my normal stuff, but it was ok. I used a heat gun to get any bubbles and help level it out. It seemed to make bubbles so I stopped. I had made sure it was an even level across the entire board, but I came back an hour later and it seemed to be separating or something weird was going on. Checking on it throughout the day and it seemed to get a rougher finish. 9 hours later its still very sticky and looks very rough like heavy orange peel. It's been in a 70 degree room all day. I hope it hardens up enough to sand and possibly recoat with either a different product or something to save this. This was a multiple day project that was milled out with a special wood for the border and matching another one if I have to remake it will be nearly impossible. I'll update this when its all finished!

The product was packaged clean and tight. It's an amazing product and was shipped very quickly.

WORKS GREAT, ONCE! If you open the bottles use it all. It will not set a second time. Thus, buy small bottles.