2 Packs LED Batten Lights，PC Body， 4FT 36W 4000k 3600lm,Low Profile Wall or Ceiling Surface Mounted Fitting for Home/Workshop/Office/School Restaurant (4FT)

We’ve just boarded out the loft and have 4 normal LED bulbs for lighting However as we intend to be spending a bit more time in the loft, while we put all our storage items up there, we needed some better lighting as we had shadows all over the place We have initially ordered the pack of 2 4ft led strip lights just to make sure it’s the right choice and we are extremely impressed with them. They are very bright but as they weigh practically nothing they will be very easy to mount As soon as we have installed this first 2 we will be ordering another 2 or 4 lights So far we are very impressed with them UPDATE: These are so bright it turned out that we only needed two of them instead of the four we thought we’d need. They are amazingly good, even more so at their bargain price. Totally 100% recommend these lights

I like the muzha lite as we're i installed them it gave me a very good quality light and allowing me to work within the area without working with a shadow of myself and I wouldn't do myself an injurie and they are very lightweight and to install them took me minutes i am no youngsters.

The good news first: Very bright. Very light. Very easy to install, especially since I had already fitted two of those two years or so back. Now the not-so-good news. Parts of the lamp began to flicker enough to trigger fits. They had to go! The recently bought one was an easy fit for the brackets alright, but the cable on the new lamp is now only about half as long as on the older one. That means I had to patch. Totally unnecessary not to mention annoying for just six inches of missing cable. Also the thickness of the new cable strands is now roughly that of hair. Very thin hair!

Throws out plenty of warm white light. Brackets for fitting the light to the ceiling are very easy to use and are hidden from view and hold the unit very close to the ceiling. This means there is no room for block connectors on the wires if you need to extend them. The hole where my wires come out from the conservatory are not close to where the wires from the unit can reach, so it was a solder and heat shrink tubing job for me. Blends in perfectly with UPVC making this unit perfect for lighting a conservatory. One minor niggle is the printing of the unit's information on a visible part of the unit (see photo). I could cover it with some white insulating tape, but it's not that noticeable really. And what's more, you get two units! The other one is going in the shed.

I bought these lights to use in an outside shed/ studio where I do stained glass work. I had them mounted on the ceiling, one at each end of the room. I had them wired in, but they can be used plug in if you want. They are perfect for what I need - they give a bright light, so I can work easily without straining my eyes, but are not too overpowering. The studio is about 3.5 x 2.5 m, and 2 lights are plenty to light the whole room. At £20 a pair - they are fantastic value too. I highly recommend them.

I brought these to replace old tube lights in my garage. These are extremely light and easy to install. They have a lower profile which gives a modern look and doesn’t take up as much space. They are white colour so they are perfect for ceilings and blend in well. I have noticed that they consume a lot less energy however the light output compared to the old tubes is night and day. The build quality is really good, and I expect these to be long lasting.

A pack of two Muzha LED batten lights to fit into our conservatory, the 5ft version ordered for width but the lower power version 4000K / 5000Lm ordered as bright white light not required for a sitting area. Both battens arrived in the same box back to back as very slim in depth, white polycarbonate back chosen in preference to aluminium with an opaque front cover to sit on white surfaces so as not to stand out when not in use. Two brackets with screws provided fitted to wall and the light just clips in, two 6” (150mm) long wires protruding from the rear of the light fitted into a connector box next to the light. With both lights fitted and controlled by the same switch the lights not tried until all connections secure, then and only then did I find two bright white lights more akin to two 200w bulbs glaring back at me, having checked for labels on the box and lights prior to fitting I did not find any, presuming these to be 4000K lights they were fitted, they are far brighter than even my outside floodlights making the whole room feel cold as looking more like an igloo with white walls than a conservatory. The lights do work but far to bright, as brackets have made holes in the wall I do not wish to return and now only use one at a time having rewired, both will be replaced by a softer light when a five foot can be found which does seem to be a problem for online advertising sites so will probably need a good electrical shop.

I bought this light to replace two old strip lights. The lights are super lightweight and slimline, they look good, and are very bright compared to our old tubes. The issues I had are with the fitting. These lights have two wires to connect, but they only have about 4" of wire sticking out from the end of the light. Old strip lights usually have the wires connected in the middle, so the first thing I had to do is extend the wires by about 60cm using a connector block; the wires are exactly the same length and there is no room for a connector block (let alone two next to each other) so the light couldn't sit flush to the ceiling. Therefore I had to dig a little hole in the ceiling so the block would fit and the light was able to sit flush. If they could improve the design so that the connection wires extend at least to the middle of the light that would be great.