Bolton Technical Tri-Mag Antenna Mount | 3/8" x 24 Threaded Antenna Mount | 4" Ceramic 8-Pole Magnets with Rubber Pads…

Item arrived promptly and undamaged. I purchased this item to mount a weather station to a 2 1/2 inch existing pole. The hose clamps that were provided were not long enough to accomplish this. Fortunately I had some longer ones on hand to replace the ones that came with the pole. One of the wingnuts was overly tight on the base. I had to use a pair of pliers to carefully loosen it as I didn't want to break off one of the wings. Once all of that was done, it was an easy setup. It leveled perfectly. I read a comment from another user that he could not level this for his weather station but that was not the case with the unit I received. Overall it seems fairly sturdy and had a good paint job.

I was looking for a magnetic mount for my weboost antenna. I needed something to affix the unit to the top of my F-350 and not blow off at highway speed as well as bumpy offroad treks. The Bolton Technical Tri-Mag Mount did the job and held tight to my highly waxed truck roof. The threads matched my antenna mount and performed flawlessly! I am very pleased with this mount and highly recommend it for Overlanders and Outdoorsmen/Outdoorswomen!

The quality build was adequate, and the sturdiness was okay. You need to have a 10mm box wrench when mounting the antenna in order to tighten the pipe clamp nuts.

Excellent product for my needs. It can be mounted on a pole or mounted flush to a wall. Looks well made and came with all of the hardware in the product picture. Put some kind of a cap on the end of the j-tube to keep out the rain and snow. Very fast shipping and well packed.

Used this to install a cellular booster antenna in the attic. Very simple to install.

Not for starlink antenna as wobbles in light breeze. Will have to reinforce and makes this just extra cost and still had to build it to make antenna stable. Light cell antenna works ok as a drop down mount.

This is what you need if you are mounting an accessory antenna on a mast pole. This J-pole clamps to the mast with two stainless steel hose clamps; the plate in contact with the mast has a little saddle with steps to hold it securely in place. The J is adjustable to keep your antenna in the correct orientation (vertical or at an angle), with index bumps in the adjustment plate. I clamped a 1080 mHz ADS-B antenna to this mount to have it stand off from an aluminum mast that holds our weather station sensor package. Works like a charm and naturally the antenna now works properly. The construction is sturdy welded steel, with a heavy enameled coating protecting the metal. Considering many similar products sell at three times the price without offering any added value, I can heartily recommend this one.

Setup was not as clear as I would have hoped, but we did get through it. We were also contacted by a technician via text, who offered to assist with the set up, however, to no avail. Our issue was poor cell service in the house, and we were dropping calls. After several days of walking through the set up, testing it, and attaching it to the roof, we were delighted to see that we had three or four bars of cell service in the home. We made calls that went through fine, so we thought we were good to wire everything for final setup. Typically, we would only get zero to one bar for cell service, so we thought we had our issue resolved. Unfortunately, our cell service became worse after the install. Instead of dropping a quarter of our calls all of our calls were dropping, and getting a lot of feedback and garble. We set up the system exactly the way the instructions advised so I’m not sure why we would have more cellular bars, but worse service. I can’t return it, because we would have to disassemble the unit, the wiring, and back up onto the rooftop, which in our case is not an easy climb. We ended up just disconnecting the repeater. Very disappointed.

Easy instal , compact

Pour extérieur

Vraiment trés bon. Solide, métal de grande qualité. Un article qui durera plus longtemps que moi 😄😄😄

needed something that i could easily attach to my homes TV tower to install the pole mount for starlink easily, this was an extremely simple solution to that problem and works great

Le support s’adapte très bien mais changé les collets par de nouveaux. Ils sont la moitié de l’épaisseur des collets trouvé dans n’importe quelle quincaillerie. Les collets fournis ont duré une journée, l’antenne a été placé dans une tour a environ 50 pieds de hauteur, il a fallu que j’y retourne le lendemain pour refaire l’installation.