7.5HP Gas Engine, 4-Stroke 210CC OHV Industrial Grade Gasoline Engine Horizontal Shaft Recoil/Pull Start Multi-Use Replacement Engine Motor for Honda GX160 Go Kart Log Splitter Mini Bike

Used this as a demo for my students to rebuild. After tearing it down and putting it back together 3 times (using the same parts gaskets etc). I decided to do a demo on throwing a rod. Knowing the governor is set to 3000RPM. We adjusted it probably 500RPM past that and sent it. Lasted 15 minutes with no issues. Bypassed the governor completely and ran it at 4500 +\- 500RPM for another 10 minutes. Still no failure. Ran it with no oil and no governor and it still did not die.

its ok engine but I had to grinde the crankshaft on the lathe to get it to American units. And it blowed up after maybe 3 hours on it. It sucked in a piece of the head casting and jacked up the valves and the pison. I filed down the piston, head and lapped the crap out of the valves with a drill press and it still runs perfect after another 5 hours. When I had the whole thing apart and all the diameters are good probably within tenths. but there probably .100 of play in the side-to side of the connecting rod and rocker arms though that's bad. The cam bearings had really bad gouges from the reamer when they manufactured it too. crankshaft has ball bearing though.

I bought this to replace a motor in an old riding tractor for the kids. While the shaft size is different, approx 19mm, the motor fired right up after filling the crank case with oil and bleeding the injector system. The service post sale is also beyond excellent, mine arrived with damage to the throttle bracket and the service team quickly responded and worked with me on a resolution. I will absolutely buy another when I need another one!

Good little motor, after I bled the fuel line it fired right up. I’ve used it on my wheel horse tractor, and it is plenty of power. Starts every time in 1-3 pulls and can pull a trailer full of wood (around 1000 lbs) The motor is also very fuel efficient. Update (8months) recoil snapped, but the motor still runs great.

Initially I was really happy with the engine. I understand how diesels work so I knew I had to prime injection pump before starting. I was shocked after priming it staryed on 2nd pull. It almost always starts on the 1st pull. I installed it on a 1958 Wheel Horse that I restored. Recently it's developed a significant oil leak. I believe it's coming from bottom of engine block but it's hard to determine since it's bolted to engine mount plate. I had multiple emails to seller on & get the run around. They keep wanting pics of oil leak. They offered no assistance or replacement. I've sent multiple pics. Taking tractor apart for further inspection risks scratches, damage, etc on a restoration that wasn't cheap. If I'm going to take that risk, & it looks like I have no choice as oil leak is getting worse, I'm just gonna install another engine.

When the engine arrived, I had a question from the seller. They politely answered my concerns and I am very pleased with the product. It consistently starts with one-two pulls every time.

Came with dent on side cover so pull start didn’t function properly also came late but after taking pull start off runs good and seems solid

I used this for a powerwasher. It’s a good engine with a few quirks one is the driveshaft is 20mm not 3/4 so I had to file it down also the exhaust spins sometimes other than that it’s been great. I used shell 15-40 diesel oil. Used a few hours so far