Tooltime® 10 Metre Cable Puller Installation Wall Access Kit - 10 x 1m Push Pull Draw Rods

Well made item. Very well packed too.

Great product, I've bought it to use at work to assist breaking into cars (legitimately) for rescuing dogs and babies for the fire service, it sits on the fire truck most of the time so not really getting used for the intended purpose, but the quality is pretty good for the money, I'm guessing the more you spend the better these are with regards to the screw joints and flexibility of the rod, however for a DIY'er or odd jobber they'd be ideal. Tese are 1meter in length too and come with handy little hooks

Can we add an extra socket on that side of the room? Not a question you want to hear after screwing down 16 boards of 18mm plywood as the new floor. This cable puller allowed me to run CAT cable under the flooring and a door, saving me a lot of hassle. Easy to screw together to extend to the required length plus an eye and a hook for feeding/grabbing. If you are aiming for quite a small hole, as I was, I recommend getting an inspection camera to help with guiding things along.

It is the first time i use one of this, trust me, it is worth your time buying one with more hooks and shapes on the tip. After i boutht it, I saw sets for amatteurs, professionals, is just about how many different hooks you have. That will allow you to pass leads and cables around. More type of hooks it will save you hours

Sturdy, flexible and does the job. I used them first to route a 15mm pipe under floorboard, thread the puller through then slip the pipe over and follow it through. Also used to trace conduit. Threads could be a bit coarser, but screw together ok for me. Good product.,

This is mostly ok. But the ends a not that strong. Two of the ten section got snaped on the ending. If you bed them more than 30deg the ends will snap. So I was not very pleased with it.

The rods look good but they’re not strong enough for the job, all the threads have snapped and most the rods have broke. Wouldn’t recommend

A very useful tool which if respected should last many years. I would suggest after adding a length and inserting into a cavity, give the rods a half turn clockwise just to make sure they don't come apart in the cavity.