EG STARTS 5X New 60mm Dome Shaped LED Illuminated Push Buttons for Arcade Coin Buttons Machine Operated Games DC 12V

I got these to enter a competition to build a Simon game. They worked great. They have a 460 ohm resistor inside that limits the current. They look great at 12v. Here are some troubleshooting tips for those that are having user error problems: 1. If the LED doesn't turn on, try switching the polarity (duh) 2. These buttons are normal open. This means the two button pins are connected when the button is pressed. 3. The button pins are the top/bottom pins, the LED's pins are left and right. 4. The LED assembly can be removed by gently unscrewing it. If you're having trouble getting it back in, unscrew another one and pay attention to where it lines up. I got these for $15, which I thought was a decent price given that these types of buttons are fairly uncommon. I see that they are now listed for $18, which I would be more hesitant to buy them at. Also note that these are not the indestructible buttons that were in real arcade games. These are fairly durable but would probably break quickly if subject to pounding. Loved them for my purpose!

I've only tested one button so far, but works well. If the listing is not clear, these are momentary SPST switches. The switch/led piece is easily removable from the button and then the led is then easily removable from the switch, which is nice. Also, the LED is independent from the switch, which works perfectly for my use case. Obviously, if you wanted it dependent, you could easily jumper it. Came with some extra LEDs and switches which was unexpected The LED has a resistor for 12V usage As others have said, even at lower voltages (3.3v/5v) with the stock resistor there is still enough current flow to light it up. However, it's easy to swap out, as its just soldered on to one lead to the LED. Swapped in a 100R one (lowest I had on hand) and it lights up great off a 3.3V GPIO pin on an ESP8266.

The buttons are excellent! Seem to be durable and well made. They came in a pack of 5, with one button of each color.. red, green, blue, yellow, white. I did not do anything special when i ordered. I guess you can order all of one color, however i wanted different colors. it also came with 1 extra led bulb for each color, as well as 2 extra 'electrical units' (for a lack of better word). However, the instructions were a bit lacking, so it took a bit of trial and error on my part, as i am NOT tech savy when it comes to this type of electronics. However, i was able to piece everything together and make it work. for my application, i wanted to make a 'home game show' buzzer system. i was following a different you tube video on how to do something like this. my application is actually connected to an 'arduino' board, which adds to my learning 'fun'. i included some pictures to hopefully answer some of the questions that you might have regarding this product. at least i know that i had all of these questions prior to purchase, so i figured i might as well post them. Hope this helps :)

Slightly imperfect molding, but functional and seems durable. Comes with a spare microswitch and a couple of spare white leds. Note that the microswitches I received were only SPST not SPDT like most of these common switches. My only complaint is that the plastic light diffusers under the domes in most colors is made of a very thick, almost opaque plastic, almost completely obscuring the light from leds. I just removed them so you could see the leds through the colored domes.

Works well. Took me a long time to figure out how to remove the switch so that I could mount these through a hole.

Used for an arcade controller build. Works great!

Everything I wanted when I ordered these buttons. Pretty clicky. Some LED’s are brighter than others (namely green) but it’s not that big of an issue. They have 4 terminals: 2 for the button and 2 for the LED. It can be a little difficult to install the LED’s, but they include extra bulbs in case the worst happens. I used 3.3V to power them, and while they weren’t super bright, what else can you expect when you use almost a quarter of the voltage the seller recommends. I was just happy they still turned on. Overall great purchase. I’d recommend these to anyone looking for large buttons.

The microswitches are hit and miss. Just keep pressing and they will eventually work.

are package was missing the 5 micro switches entirely. was very disappointed had to return and re-order

Me agrado la construcción de este producto, y que cuenten con repuestos de los leds y los pulsadores. Para que emitiera más luz los leds modifique la resistencia interna que incluye y la cambie por una de menor valor. Es fácil sacar el led de la base.