Are these pin end or pin less ?

The ends are NOT pinned; these blades are pinless.

will this fit deWalt 788?

Any plain end 5" blade will fit the deWalt 788 machine..

Do they cut 1/4" aluminum?

Well, it is confusing, isn't it? At least to me since the info seems inconsistent or puzzling. The package says #2 and #5 can cut "thin metal." 1/4" is not what I would call "thin." But you should be fine with 1/4" aluminum. Why? When cutting metal, at least with a fret saw which is what one should use for that, you want to have 3 teeth touching the metal at all times during the cut, since fret saw blades are 1-direction only, and if you don't get enough teeth involved, the "point" (cutting edge), which is very steep and if the blade drops so that the tooth meets the metal full on, it "hangs" badly. The edge of the metal hits a near-vertical angled tooth. The same physics should apply with any other blade/tooth pattern. BUT, if the blade tooth is symmetrical (unlike a fret saw) the cutting edge's slope might be gentle enough to be more manageable since the tooth would fall on a less-abrupt/steep tooth edge. I can't see the profile very well on the "close up" view provided but they don't especially look symmetrical (?). So, then, what's confusing? it's that blades 2 and 5 do allow, for a 1/4" thick piece (cut length), 3 teeth on the cut at all times (20 tpi => 5 on the cut, and 12.5 gives you 3.125, but 7, the one they don't say can is under, at 2.875. So 7 should be a problem for metal less than 1/4" thick if the teeth are not symmetrical. So unless by "thin" they mean ≥1/4" which is hard to believe, I actually have no idea what they are talking about, since you could with 2 & 5 cut any metal that is 1/4" thick. Maybe you should contact the manufacturer who should know and maybe does... But I wonder who provided those specs on the pkg, so who knows? Actually, if you are going to cut very much metal I recommend using a fret saw which is made specifically for that. You could also look at a "hack" saw which cuts most metal of most thicknesses, but nowhere nearly as precisely as a fret saw and with much more waste (gold "waste" is something you want to avoid). You can get a fret saw that is usable for maybe 15 dollars (olson brand) or you can spend over $200 Knew Concepts which will cut almost anything as some blades are 90 TPI with a kerf around .006" If you contact them and they you give useful info, could you update your post so everyone can understand (even me).

Desertcart Logo

Bezorgen naar Netherlands

Voor de beste ervaring Download de App

DOWNLOAD DE APP

WE HALEN ITEMS UIT

VAE
VK
India
VS
Japan
KOREA

Klantenservice

Over Ons

Klantondersteuning

Veelgestelde Vragen

Zijn de producten echt en authentiek?+

Ja, alle producten worden direct gesourcet van geautoriseerde retailers in de VS, VK, VAE en India. We hanteren strikte kwaliteitscontroleprocessen en verifiëren elk product voor verzending. Alle artikelen komen met toepasselijke fabrikantgaranties en zijn gedekt door ons standaard retourbeleid.

Hoe lang duurt levering en is het betrouwbaar?+

Levertijden variëren per bestemmingsland, doorgaans van 3-9 werkdagen. Elke bestelling is volledig traceerbaar via ons systeem. We verzorgen alle douane-afhandeling en gebruiken betrouwbare koerierpartners voor de laatste kilometer levering. Je ontvangt regelmatige updates over je bestellingsstatus via e-mail en onze app.

Wat is Desertcart? Is het veilig om van te bestellen?+

Desertcart is een internationaal e-commerce platform dat sinds 2014 actief is. We verwerken veilig duizenden bestellingen wereldwijd elke dag. Elk product doorloopt ons kwaliteitsverificatieproces voor levering, en we bieden end-to-end bestellingstracking, 24/7 klantenservice en een uitgebreid retourbeleid om een veilige winkelervaring te garanderen.

Hoe wordt productprijsstelling berekend?+

Onze prijzen zijn inclusief productkosten, internationale verzending, importrechten, douane-afhandeling en lokale leveringskosten. We verzorgen alle douane- en importprocedures, zodat er geen verborgen kosten zijn bij levering. PRO-leden ontvangen extra voordelen inclusief gratis verzending.

€ 95.02

Belastingen en rechten incl.

Netherlandswinkel

Gratis Retours

30 dagenvoor PRO-lidmaatschap gebruikers

15 dagenzonder lidmaatschap

Veilige transactie

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4,5 | 7.300+ reviews

Anita G.

Goede ervaring, maar de tracking-updates zouden beter kunnen.

2 maanden geleden

Vikram D.

De MOLLE schede is van uitzonderlijke kwaliteit. Zeer blij met mijn aankoop.

2 weken geleden

Bekijk alle Trustpilot reviews

Manufacturer	OLSON SAW
Country of Origin	USA
Model number	FR49400
Colour	Black
Item Weight	23 g
Product Dimensions	12.7 x 0.64 x 0.64 cm; 23 g
Item model number	FR49400
Item Height	0.25 Inches
Item Width	0.25 Inches
Are batteries included?	No

Fret Saw Blade Assortment

Details

Beschrijving

Specificaties

Heb je een vraag? Zie wat anderen vroegen

Veelgestelde Vragen