Land Guard 8×4×2 ft Galvanized Raised Garden Bed Kit, Galvanized Planter Raised Garden Boxes Outdoor, Large Metal Raised Garden Beds for Vegetables.

I thought about the stars and even though I suspect these will get plenty of dents and possibly rust, I want to be fair because the price is right, they look great, they are easy to put together, and make starting a garden so easy. It does take time to put together and pulling the protective plastic off is not all that fun, but their attention to protecting the metal is appreciated. They really need to box it with more corner protection because the box is heavy and after buying 6 of these, the corners take a beating during shipping. Ours still came fine. There were some corners bent but they were easily bent back. Had some scratches on one set which appeared to be packed that way. Again, the price is good and we were ok with it. Others may expect more but you get what you pay for. Our setup is looking nice. The planters have a nice shape. We do not care for the rounded look and these do not have that. We recommend them.

When I bought these 6x3 raised garden boxes, I read the reviews. I was honestly very pleased to get them and find out they are quite sturdy once they are assembled. I also thought the panels would be razor sharp, but no they are not, as a matter of fact on the longest sides they are rolled and not sharp at all. The ends are sharper but I was still able to assemble the whole thing bare handed, no need for the gloves I had handy. I am an 60 yrs old lady. I was able to build one in an afternoon, lots of rest breaks, and doing chores during the same afternoon. 2 people would have been great but not a must. The instructions could have been better but I made do with the picture diagram they included and used my common sense. But if you have never assembled something like this then here is a couple of tips. 1. Coat the bolt threads with wd-40. Really helps when putting the bolts on, but not a deal breaker. 2. Don't tighten anything down until the whole thing is together. Hand tighten only. Once its together tighten away. 3. Start with the corners first and the middle panels last. If you do the corners first it will be self supporting. Important if you are building this alone. 4. The center braces should be installed in every other hole. (See my photos for placement. ) start at the bottom when installing the rods. I still have yet to fill them but so far I am pleased.

I’ve had these for a season now and they hold up well. When they arrived, the edges were bent on some of the pieces. I was able to put this together myself, with the help of my dad to unbend some corners. The edges are very sharp, so be careful. I haven’t had any issues with critters getting in, compared to neighbors with in ground gardens. I’m thinking of adding another in time. They were able to hold multiple vegetables, but now I want to expand my garden!

Sturdy, straight forward, weight when in the box is heavy but put together isn’t so bad, still had my boyfriend help though, can’t wait to start our garden!

I bought 8 of these- 4 from Amazon, 4 directly from the manufacturer. Almost all of them arrived with bent corners- easy enough to fix but still, the packaging could be improved. They really need better edge protection in general- lots of dings and chips. 2/8 have small rust spots right out of the package, so doesn’t bode well for longevity. While they are cheap, there are certainly cheaper options out there that are probably equal in quality. They come with extra hardware, which is nice. Ran into a few dud bolts but still had plenty of extra. A bit tedious to assemble alone, but do-able. Structurally seem sturdy enough, just hope the material lasts. Hoping I at least get a few years out of them. If I could do over the assembly, I’d use locktite. I may still go back and add additional cross braces- there were only 4

This was great overall! I did have to buy a few extra screws at Ace to finish it, but that’s okay. For the price, the quality is really solid — just be prepared for a lot of assembly. It definitely took some time and effort (about an hour for me), and you’ll need tools to get everything together. Every bolt has to be individually screwed in, but it hasn’t failed me yet. If you want something affordable and don’t mind putting in the work to save money, this is a good choice. I’ve tried a few different brands, and this one also doesn’t reflect the sun like the others did — plus, it’s huge!

THIS IS A VERY SHODDY AND FLIMSY PRODUCT!. Quality control seems non-existent. For instance, not enough bolts were included, while way too many nuts and connecting double-ended nuts (for the two-part spacer threaded rods) were sent. Also, about 10% of the bolt heads had no slots cut in them for a screwdriver. In addition, the paint/coating is easily scratched of while attempting to assemble this P.O.S. - which took about three hours, by the way, and I am a very handy person, with a full compliment of tools. The sheet metal is very sharp on the ends; if you do not wear gloves you will get cut. The included two part spacer threaded rods are very weak and easily bend (not what you want is a spacer) but mostly THEY ARE WAY TOO SHORT! I ended up spending over $55 at a hardware store to buy (10 castle nuts to finish the outside of the connector rods, and) beefier 1/4 inch threaded rod, which was also long enough to not require connectors. The spacer rods for this bed must be 50 inches long for the bed to be not bowed-in in the middle but the ones that were included can only be adjusted out to 47.5 inches. Finally, the very poor grade shipping packaging caused about half of the corners of the sheet metal panels to arrive bent. Beware, the low price of this product is not worth all the effort and extra money you will need to spend to assemble this properly.

Super easy to put together -- instructions are sparse but its not rocket science. Edges are sharpe so just be careful when assembly. I bought 5 at one time and only had 1 screw think about being uncooperative. each kit of nuts and bolts had several extra components which is always helpful. If i expand my garden, i hope these are available to buy again.

I recently purchased the Land Guard Galvanized Raised Garden, and I couldn't be more pleased with it! From the moment I unboxed it, I could tell it was built to last. The galvanized steel is strong and durable, ensuring it can withstand the elements year after year without rusting or degrading. The setup was straightforward and surprisingly easy—no special tools required, and the instructions were clear. The garden bed holds a generous amount of soil, providing ample space for a variety of plants, from vegetables to flowers. The height is perfect for reducing strain on your back while gardening, and the sleek, modern design gives my garden a neat and polished look. Whether you're a seasoned gardener or just starting, I highly recommend the Land Guard Galvanized Raised Garden! It’s durable, functional, and a great addition to any outdoor space. I absolutely love it!

Easy to assemble and fairly sturdy. We have assembled all three and filled with soil. We will top up in the spring with rich soil and compost. Time will tell but they look good in our garden and I am hopeful they will last many years.

These containers are awesome! Very easy to set up and exactly what I was hoping they would be. I give these garden containers 5 stars!

Good quality. Easy assembly but lots of screws, you get what you pay for. The center rods are somewhat hard to adjust because they are not left thread on one side and right thread on the other like a normal brace would be. But anyways it's only a one time thing to adjust so it's fine. Most of the sharp edges are hidden once assembled. There's only a sharp spike on the top corners that isn't hidden. I'll probably grind it so the kids don't accidentally fall on it and cut themselves.

I was a little skeptical at first. When it arrived the corners of all the pieces were beat up, and the metal was very thin and flimsy. Also The instructions kind of suck. But once assembling the bed I am happy with the end product. I think I will reinforce the edges with some stakes just in case, but for now this will be fine for what we need.