TW25B Premium Firearm & Gun Grease 0.5-Ounce Reclosable Syringe, Synthetic Lubricant

Things that make up an ideal firearms grease:1. It stays where you place it.2. It performs well during high-impact activities vs sustained activities.3. It can handle high temperatures that guns reach.4. It's not messy.5. The applicator/container is built for precision application to areas such as slide rails, ejector, ejector rod, etc...Mil-Comm TW25B is the first grease I've ever used that not just met but exceeded all of the above. Therefore, I give this grease an A+ and I hope more people start to use it and it becomes more widely available because it is the best grease. There are people out there who will tell you that gun greases are a scam and waste of money. While your firearm may operate with "regular" greases, I'm going to tell you right now that it took 2 seconds after deploying TW25B to notice the monumental difference in lubrication, application, and protective qualities vs the other greases and by other grease I'm even talking about other "GUN" greases. The grease has a much more cleaner, synthetic feel and it stays put after putting hundreds of rounds through the gun. My guns' actions clearly works more smoothly after applying TW25B. Enough said, just buy this grease, you won't go back.

This is a great gun lube. Stays where you put it, and you can put it EXACTLY where you want with the excellent pointy syringe applicator. Particularly good on sliding surfaces (hammer/sear, slide/frame, etc.). Not sticky like more tacky greases so picks up far less carbon/dust. It’s white, and stays in place, which makes it a cinch to apply. Kinda like mayonnaise. I recommend using a lighter oil for rotating parts like pins, pivots, etc. where more migration is desired. It’s expensive, but only a tiny amount is needed, so one of these little tube syringes lasts and lasts.

Picked this up, mostly for the applicator, with some additional TW25B on the side to refill it. I was hoping to use this to try and ninja some grease into those tough to reach spots and without globing it on. I managed this with solid success. I think some people that have had issues with this applicator are suffering from a little bit of user error. I've used it as follows with zero issues:- Cut nothing, the nozzle is very narrow and good to go out of the box.- Twist the tip counter clockwise to line to nozzle up with the tube port. The port looks like a little white dot inside the clear plastic.- Locked n' loaded; Squirt it right where you want it. Despite the size of the small nozzle no need to put too much force into it.- Pull the plunger back a bit to clear excess lube out from the nozzle.- Twist the tip clockwise to slide the nozzle away from the port and close the tube off from the open air.- Done.I'll check it again in a couple weeks to see if the nozzle gunks up at all, though if it does I imagine it's nothing a very fine sewing needle wouldn't take care of. I really like this applicator!

Works great. It not too thick and seems to liquify after use. Great lube for a smooth operation in bot rifle and pistol. Love this for the summer. Haven’t tried it in anything below 50° Seems to collect dirt which keeps the grid from getting into were it shouldn’t and makes cleanup easier because of that. The syringe works great for application. I like the twist top. Never have to worry about loosing a cap!

...Then its good enough for me and you. VULCAN cannons back in the day were capable of firing (theoretically) 3000 rounds per minute. That rate of fire obviously caused some serious SERIOUS heat build-up during the firing and cycling process. But we VULCAN Systems Mechanics and the VULCAN Operators lubed our VULCAN cannons and their respective feed chutes and return chutes with this excellent Mil-Comm TW25B Premium Synthetic Lubricant. We used large tubes of this grease of course, and we did not skimp on it at any point. So I know that this product is as excellent as my fellow reviewers have claimed that it is. Check it out. Obviously--for personal firearms--you don't want to use liberal amounts of this grease. But then again, I doubt that any of us gun owners possess weapons capable of firing 3000 rounds per minute (theoretically speaking, of course). Check this stuff out. It's truly awesome.

I spend lots of time on the range and all of my equipment gets the TW25B treatment for all high impact or wear areas. I'm not a fair weather trainer and have used this from temperatures of 10°F to 105°F. I've never had a failure to due the grease creating a malfunction (either running or gunking from heat or cold). This extends to high volume practice with pistol, shotgun, semi-auto rifle. It also helps to put a dab of this on the back of the locking lugs in a bolt action rifle if doing high volume precision practice. It prevents the recoil from creating metal on metal friction that makes feeding harder.

This is the only grease I'll use on my firearms. I've been using it for years and it works great. The company is also very easy to work with if something is wrong with your order.

I had the opportunity to use a trial pack of TW 25 products when I was deployed overseas. I loved the way the grease was able to lightly lubricate the bolt and carrier of my M-4 and allow me to run almost dry. Fast forward a few years and I am using the grease again on a civilian AR 15, and absolutely like the results. The rifle is able to run almost dry, not soaked with CLP and flinging slop every where when firing. I have been in some range time with "dirty" ammo and over 200 rounds at a time without stoppages of any kind. Use the biodegradable solvent too to bust off all of the carbon and powder residue to really give my rifle a post operations cleaning. This stuff works great on my Glocks too! Very happy with this product!