FANTELI 912 921 LED Bulb, Strobe Flashing 3rd Third Brake Center High Mount Stop Light, 300% Brighter Non-Polarity T15 906 904 902 W16W Brilliant Red

I can't rate this LED bulb on longevity because I haven't had it very long. Maybe a year from now I can, but I honestly expect to last several years, not just one. As for ease of installation, well that is more a reflection on the vehicle manufacturer than it is the bulb manufacturer. Remove 4 phillips head screws, remove the third brake light lense cover, and there's you bulb. Pop out the old, pop in the new, and put it all back together again. The bulb is much brighter than a conventional bulb, and requires less power to do so. I also like the flashing effect. It flashes a few times then goes to solid and stays solid until you release the brakes. Once you apply the brakes again, the process repeats. The whole reason third brake lights came into existence was to get drivers attention, and alert them you were slowing down or stopping. Now that they have been out 20-30 years, drivers are getting complacent again. This light flashing brightly a few times before going solid red helps get their attention again. I don't want anybody hitting me from the rear, or any direction for that matter. I think these bulbs are a great safety addition to my truck. If it helps prevent one accident, then it was worth the price...and I might add that these two packs of bulbs were pretty cheap to begin with. I hear they are illegal in some states, so you might want to check your local laws before you buy if you want. Me personally I don't care if they are legal or illegal... I am using them anyway. if some cop decides to write me a ticket for having them installed...well I'll take it, but they will remain. I like these bulbs and they serve a good purpose.

Increased Visibility: The FANTELI 912 921 LED Bulb significantly enhances visibility, especially as a third brake center high mount stop light. It ensures that my vehicle is easily noticeable to other drivers on the road, promoting safety during braking maneuvers. Strobe Flashing Feature: The strobe flashing feature adds an extra layer of visibility, particularly beneficial for new drivers or those driving at night. It grabs the attention of surrounding vehicles, reducing the risk of rear-end collisions. Easy Installation: Installing the FANTELI LED bulb was a breeze. It's a direct plug-and-play replacement for the factory bulb, requiring no additional modifications or wiring. Energy-Efficient: These LED bulbs are energy-efficient, consuming less power compared to traditional halogen bulbs. This not only reduces the strain on the vehicle's electrical system but also contributes to fuel efficiency. Durable Construction: The FANTELI LED bulb is built to last, with a sturdy construction that can withstand the rigors of daily driving. Its longevity ensures long-term reliability and peace of mind. Overall Impressions: I'm thoroughly impressed with the performance of the FANTELI 912 921 LED Bulb. It has significantly improved the visibility of my vehicle, especially during braking situations, thanks to its strobe flashing feature. The easy installation process and energy-efficient operation are additional bonuses that make it a worthwhile upgrade for any driver concerned about safety and visibility on the road. Final Verdict: For new drivers or anyone looking to enhance the safety and visibility of their vehicle, the FANTELI 912 921 LED Bulb is an excellent choice. Its strobe flashing feature, easy installation, energy efficiency, and durable construction make it a standout option for upgrading the third brake center high mount stop light. I highly recommend it for anyone prioritizing safety and visibility while driving, particularly at night

Easy install, packaged great. Bright upgrade and the flashing will help get other drivers attention. Awesome product

I ordered these Fanteli LED Bulbs for my vehicle. I got them this morning and placed then in my car. I love them!! They work absolutely beautifully! So much better than having to splice wires and hook up connectors that do not work! These lights are awesome!! Thank you!!

The flashing red brake light has been working perfectly in a 2015 Honda Odyssey center brake light for 1.5 years for me. The OEM bulb was on the dim side, but this one is nice and bright and very attention-grabbing. I believe the brief flash makes driving safer and will reduce accidents. 5 star product based on that. But I am deducting a star for the reasons below. I have had doubts about the legality of the flashing feature. My research has turned up some mixed results including that they are not federally legal for car manufacturers or dealerships to install in the US market. The reason is that they do not conform to the vehicle lighting guidelines mandated for all new cars sold in the US. Aftermarket modification by the vehicle owner is not federally illegal, therefore may be legal based on state law and vehicle type (e.g. motorcycles in Oregon). In my state of NC, I can't find any good citation showing they are legal (or illegal). But even if they were legal in a given state, what about driving to other states? Am I going to research each state and change the bulb as necessary? What if a police officer sees the light and, believing it is illegal, decides to pull me over and cite me for it (and of course ask a bunch of questions and look into my car, etc.). A ticket is not that big of a deal and might be dismissed in court, but who needs the hassle plus the risk of other infractions possibly being discovered? Furthermore, what if I were involved in an accident? Could the other party's attorney argue that my use of a modified, non-standard signal caused confusion/distraction and contributed to causing the accident? Could my insurance company use the same argument to deny coverage? I don't want to lose my house over a brake light modification. Despite this being a good product and a good safety improvement, I have decided to remove this from my vehicle and replace it with their non-flashing version. Hopefully the federal vehicle standards will be updated and I can use this again in the future.

Dice que es compatible para Silverado 2016, pero está equivocado.

I've bought various brands of LED lights for various vehicles. Nearly all fit the vehicles as ordered and functioned well on install. And everyone seems to write e review only on install. Sure. They all work and look great. The trick is to find a brand that has longevity. The plethora of XYZ Ltd. Chinese companies stamping these bulbs out by the millions is completely bewildering. In this case, competition seems to breed poor quality for a cheap price. So many of them are so crappy, when they quite after a few months of their "100,000 hours lifespan", you curse a few times, throw them out and order a different unknown brand and take another chance. These guys offer a 5 year warranty that I activated on their website a few minutes ago. Beats me how to make a claim if I have to. I would really rather pay more if I could trust that I won't be swearing at them in 3 months when they are flickering. On initial simple install on the center brake light of my 2002 Suzuki Gran Vitara XL7, the lights flash 3 times and come on nice and bright...just as the company promises. Now we wait... EDIT: Nearly 2 years later and they are working flawlessly!! EDIT: 2 years later. 1 of the 2 has quit. One side of the bulb is a dull red glow. I put the OEM bulb back in and ready to swap out the other when it goes. The SUV is driven little so these LED have seen little use. Typical Chinese quality LED. 30,000 hours???? Sure. Maybe 30,000 minutes. GARBAGE. EDIT: 2 years 2 months. The second one has died. I've reinstalled what are likely the original incandescent bulbs from 2002 model year Suzuki Grand Vitara. $12 each for these LED flashers. 2 years at 50% highway use on 12,800 kms total use. Save your money. Buy something else.

Bought these for my 2013 GM Silverado/Sierra I've been rear ended twice, hopefully this will reduce the chances of that happening again. The high mounted light assembly is easily removed with a T20 torx screwdriver. The bulb sockets just twist to removed, and then just pull the brake bulbs out. ***** I was unable to insert these new bulbs, the end that you insert into the socket is blunt and jams up against the contacts in the socket, the glass bulbs have a rounded point. I took a fine file and tapered the contact end of these bulbs so that they would now go between the contacts in the socket with a bit of wiggling. Cleaned the gasket surfaces of the light assembly and the cab body before reinstalling. They operate exactly as I expected, 3 clear flashes then solid on when brakes are applied. How long the perform, I don't know, this is the first day.

I am extremely satisfied with the purchase I made from this seller. The product was delivered quickly and arrived exactly as described in the listings. The product quality was outstanding, and communication with the seller was quite easy. In particular, I was impressed by the seller's prompt responses and customer-centric approach. Whenever I had any questions or concerns, instant support was provided, which was a great source of reassurance for me. After this experience, I definitely intend to shop from this seller in the future. I would like to express my thanks for their excellent service and product quality. I wholeheartedly recommend them to everyone!

Light works very well without any issues. Very satisfied and my car is more visible when I break.