Temperature and Humidity Controller Reptile Mushroom Greenhouse Thermostat Pre Wired Dual Controlled Outlets Heater Fridge Humidifier Dehumidifier

I used an InkBird ITC-608T before purchasing this product...the setup and manual for the InkBird are insane, plus the alarm was so annoying (I took it apart and removed the speaker)! This product solved all those issues. Very easy to set up, the manual is small and makes sense, plus it's automatically set so that the alarms won't sound (for those of you with alarm issues, set the temperature max to 194 degrees Fahrenheit and minimum to -40.... for humidity set both the high and low to 0%...no more alarms!!!!).I use this to control fans and foggers and it works perfectly. The sensor is extremely accurate and updates super fast, just like the InkBird.For those of you with issues with it stopping working, I'd check whether the amps/watts of your accessories exceeded what this controller can handle.Great product, especially for the price!!!

Better price than Inkbird controllers, works well! I got two of them, one worked great, the second had a faulty humidity sensor. The seller was very responsive and took care of the issue very quickly. Very happy with Pymeter, and happy to keep my gourmet mushrooms humidified!

The only complaint I have about it so far is that the instructions are almost mandatory - but are written very poorly.Mines almost a year old (only used for about a month) and when setting it back up I obviously couldn't find the instructions. You can figure out what each setting does, but it would be nice if there were a sticker on the back of it that explained everything clearly.On thing I see a lot of complaints about is that it continually beeps on high humidity.H_L needs to be equal to H_H if you want to disable the High humidity alarm.By default H_L = 10 and H_H = 99. As soon as the humidity goes above 89.9% you will hear a continuous beep.I lowered the H_H down to 10.0% and the alarm stopped. (I did it this way because it was taking too long to get up to 99%).With all of the complaints and low reviews I am shocked they have not tried to update their instructions or reply to the users with this complaint (I actually came here to write the same review until I randomly got the idea to try matching H_L & H_H after reading the comments.)

UPDATE 10/2024Mfgr emailed me about my issue and replaced it quickly with few questions asked AND even followed up with me. Great service.At first this unit was perfect. My frog was happy and I was happy. Then, one day, I noticed the fogger wasn’t going off at all. I checked the unit and it was stuck at 39.9F and 0% RH. I’ve tried turning it off, reprogramming etc. to no avail. If the mfgr will send me another I’d change my rating. I would even be willing to ship this one back. Will update if/when it’s resolved 😕

Update: I went ahead and used the humidity control while I'm in my office and can keep an eye on it. Bad idea. Appears that it has shorted out my humidifier.First issue I had to plug and unplug the device a couple times before I could initiate the setup process. The first few times it just displayed an 8 instead of the step menu.Once I was able to setup the ranges, which was easy enough I plugged in my humidifier to rest it out.It turned on the device as expected but after about 3 minutes it displayed a 6 on the screen and nothing else. I thought that might be the operation screen. Nope, unplug and plugged back in, showed the ranges and it allowed the humidifier to run past its set range.I don't trust this device at all. Not reliable quality.

I like to use the dual temp ones for my reptiles. I bought this for my frog tank. After 3 months the temp works but the humidity stopped working. It's numbers are all over the place now 😒

Great 👍

Product stopped working, does not power on digital screen nor outlets. This product has literally been sitting in the same spot since installation. Most likely a poor soldering job.When it worked it worked great, was able to easily adjust the humidity in my grow tents and accurate with the actual temp/humidity. But since it doesn't work that doesn't really matter now..