B450M DS3H

Good value for money

it's good but expensive. and the place of the SATA connectors is bad- they came under the GPU, and this is very annoying because you won't be able to connect all the SATAs.

Excelente placa com ótimo custo beneficio.

Edit: MB died on 5 June 2022. Very good board. Was worried with some of the negative reviews but it worked like a charm for me. Anyone who built their own pc before should not hv a problem. Tips: take a pic of the front panel pins with description for easier zoom in when connecting the jumpers and make sure the positive + pins match jumpers with small arrow notch. Pw_led for 2 pins. Pwr_led for 3 pins connector depending on your PC case. Make sure pay attention to every detail the diagram. I.e slots 1 and 2 for dual channel ram. Alternate layout. If you can assemble Ikea you can assemble this. My PC case came with a case fan with standard psu connector so I don't even need to use the motherboard fan header. M.2 slot is perfectly fine. Just unscrew the screw at the end of the slot, put it in and screw gently back. I am using integrated r5 2400g so didn't use the pci slots. Boots up the first time. Perfect. Delivered 24 Oct 2019 and box says supports ryzen 3000 desktop CPUs. So don't need bios flash.

This is a great board. It works well, its well specified, easy to install and it has been utterly reliable in service. I bought this at same time as another make of board and have been so impressed by this one and disappointed with the other make, that I have now bought another gigabyte to replace the other board. These boards do what they say on the tin. They may not be the best if you want fancy gaming facilities and bells and whistles, but if you want a solid and reliable board to build a high spec desktop or server, this does very well indeed. I have now used this board in small office fileserver and in a dedicated Video production workstation. In both applications it has proved 100% reliable

For the price its a phenomenal motherboard (At time of writing, price was 75 shipped). 4 ddr4 slots, 2 slots for video cards, 4 sata 3 ports, very easy bios with mouse support (an appreciated feature). My ONLY complaints about the board is the location and orientation of the sata ports can cause interference with any decent sized graphics card. The ports are orients straight off the board, instead of to the side- so cables will point straight towards the card. The lower 2 will clear most cards with ease (My application has a 1080ti, and even then both ports were easily accessible), but the upper two ports are covered. You CAN readily use a low-profile sata cable however, just keep that in mind. Second and last real complaint about the board is that it lacks much in the way of fan headers. Theres a single fan header for your cpu, and a single fan header for your system fans. *Thats it*. If you plan to run more than 2 fans, you will need to approach this (Fan controller, splitters, fans powered by sata or molex, etc). Not a huge deal- again, this is a 75 dollar board- but one thing to keep in mind. One last and very, VERY minor critique, is that the ram is located quite high on the board, which can cause screw-clearance issues with top mounted fans/radiators. Ive installed these boards in a few different cases now and things have ALWAYS fit, but the ram posts always block off 1 screw in the top fans. Ive always had to install the fans, than the board. If you want to do anything with the fans, you have to remove the board to get that last screw (assuming you dont just leave the screw out). Not a huge deal by any means- abut again, something to be aware of. Again, for the price? Phenomenal product.

This board works great with my systems and I’ve had no problems. I did my first build and had some concerns reading the negative reviews. Don’t listen to them. This is a great mobo and I would recommend it to anyone looking for a budget mobo!