🎶 Silence the Static, Amplify the Experience!
The Cable Matters Ground Loop Isolator is a versatile audio solution designed to eliminate unwanted noise in car and home audio systems. With its 3.5mm compatibility and easy no-tool installation, this isolator effectively removes buzzing, hissing, and static, ensuring a premium listening experience across various devices.
Number of Channels | 2 |
Mounting Type | Surface Mount |
Specification Met | Fcc Part 15 (Inferred) |
Material Type | Plastic |
U**O
Awesome device - works really well!
Some background: I purchased this thing for a project, where I connected a RasPi to a portable stereo, to turn the stereo into a music streaming device. In this instance I needed to use the aux (3.5mm) port for this instead of Bluetooth for the pairing. In the initial setup, there was a lot of feedback/noise (buzzing) because the RasPi was powered by the stereo, causing a funky grounding issue.... I guess the Pi was grounded twice, once from the USB port and again via the Aux cable.I'm not sure how exactly it works, but this device cleared the issue right up - audio plays through my aux port with no buzzing at all, now and the setup sounds great. Definitely worth the price.Also, at least for my application, the size and shape of the device were perfect - since it has a somewhat rectangular shape, I was able to use command tape to tape the isolator to body of my radio... all-in-all, I think it looks pretty cool.Cable Matters makes excellent products and this one is no exception.
H**D
Very effective for voice
This did a great job taking a ground loop hum out of camera record system for voices. I can not tell a difference between the mixer board recording and the camera record. Previously, the camera had a terrible constant hum when direct audio and powered at the same time. No way to get around needing power for hours of recording. It is small and lightweight. I bought another for backup as this is now a required tool.
L**R
Works great
Works great! I bought it for my after market bluetooth that plugs into my radio. It's kind of cumbersome with it just hanging down, but it does eliminate the noise through the speakers that is usually there.
B**R
Worked great for my case.
So here was my situation. I got a set of JBL LSR305s hooked up to a Minifuse 2. Had no issues as I got some nice shielded cables for it. Zero noise or hum. But recently saw a sale on a Monoprice sub so I decided to grab it as the sale was very nice. Sadly the inputs and outputs on the sub are RCA and my cables wouldn't work. So I got some new cables well reviewed on Amazon by a brand called Pig Hog. Well it didn't work out as intended. Very loud hum with the sub set to 80hz crossover. Like it sounded like I had an indoor air unit sitting under my desk. But with some investigation I found that it wasn't the cables. So I went back to hooking up my JBLs with their original cables that I had, hum is gone there, then I used the headphone out put to go into the sub giving me a way of controlling sub level without reaching under the desk using a trs to rca cable I had around. But while the hum was gone on the JBLs it was still very there on the sub. And thats where this guy comes in. Received it yesterday and after putting on the line to the sub all the hum is gone. Worked as intended for me. Great product.
N**A
Thank God for Cable Matters!
I've used 3 different 3.5mm Hum Eliminators, from separate manufacturers over the past 7 years; but I was never satisfied with any of them and was ready to give up on finding a decent one...Until I bought this product!Why it rocks:-Removes the nasty buzz from my laptop. (Just as advertised.)-Right angle 3.5mm plug. (Stays out of my way.)-The device quality is HIGH, with a soft material on the outside body.-It does NOT release a vapor into the air. (Like other cheap competitors.)-Low cost. (No-brainer purchase.)Note: - There are 2 stickers on this device:-1 large on the front;-1 smaller one on the back;these can be easily removed without hassle.Strong recommend!
J**Y
Removes all low end too
It definitely removed all feedback. The problem is it also eliminated the low end. It was like my amp wasn’t on at all.
S**S
Works as intended.
The one I was previously using in my car died so I needed a replacement. This one seems to be better build quality and you can also use your own Aux which is better than my previous one because that is what failed on the device but it was permanently attached to the ground loop, so this is leagues better. I paired the Cable Matters ground loop with a very high quality CNCESS Aux so I shouldnt have that issue again. Sound quality is great.
I**X
Did not remove all static fuzz
Not so sure this made a difference in my case, yet to try it another way besides the car i had placed it in.
Trustpilot
3 weken geleden
3 weken geleden