Dewalt Right Angle Attachment, Impact Ready (Dwara120)

EXcellent

Excellent tool

all good

As described

Very good but the price is high.

Very tough built. However not suitable to use standard bits due to deep holder. Must use long screw bits.

Good

This should be in every personal tool box. Especially if you every find yourself working between studs, joists or tight areas. Works very smoothly and dont think this bad bear only runs at low speeds. You will pass on it and realize soon enough you could have used it as it will surely be handy. If you are cheap f&$!, and expect to be able to use it in a commercial setting day in and day out over a course of time without replacing it, you are probably wrong. However, this should last a home owner a lifetime and should be considered as handy to a contractor. The bit it came with should last as long as you have a simple understanding of alignment to avoid stripping. The hex shaft is 1/4" and good for the drill/driver but also simply snaps in to the 1/4" cordless impact wrench. *For people such as the highest rated negative reviewer: This tool stripping out because of having to back out the screw or the screw freezing when driving in... The first thing to note is that this has to do with torque. Placement of a screw such as over a knot can also co tribute to the difficulty. Any bit will strip if you keep spinning it. If this starts to happen when using a drill/driver, think about switching it to an impact, if you have one. If you have one, it will increase torque dramatically and will likely get you right out of a rut. The simple fact is that from time to time, you may have to snip a screw off, back it out with grips or even abandon it, that is if you are relying solely on this, but an impact will likely turn things in your favor and also make the drilling super, super easy.

Vous avez une perceuse/visseuse, il vous faut absolument cette outils tellement pratique pour accéder a des endroits étroits.

great tool. As a sprinkler fitter I am constantly working up in tight ceiling spaces during fit off. This right angle attachment has already proved it's worth on a number of times in the short time I've had it. It has enough torque to easily put self drill screws the the metal brackets we fit off to. Just a note that the head does tend to rotate when drilling but with a bit of hand pressure on the right angle attachment you can overcome this

I've tried quite a few of these DeWalt 90 angle attachments over the years and have found that they are the best among what I have tried. The top (yellow) attachment finally failed and I purchased both the item here as well as the 4 in1 kit with the flex extension. For most of the work I do, this basic attachment serves every purpose. Occasionally I'll combine this 90 degree with a 6" or 12" rigid extension from Diablo, that really opens up a lot of options for tough spaces. When all else fails, the 4 in 1 kit can sometimes be the only tool for the job. Quality of all of these is accurate. Nice durability. Good magnetic strength. This one is also the most compact which is helpful. Again, each model serves its purpose. If you wanted to compare it to the 4 in 1 that can be found here https://amzn.to/48E85DZ The diablo extensions pictured can be found here (6") https://amzn.to/43Y8oae (12") https://amzn.to/4rulyWG

Excellent.