what the difference between this and the polycrylic??

I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish. Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired.

Will it be very shine and smooth for the surface after I use? thanks

Yes. I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats. PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end.

Can this be used on floors?

Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected.

what is the best way to apply this

Use a bristled brush. Those sponge brushes leave bubbles in it.

Desertcart Logo

We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.

DOWNLOAD DE APP

WE HALEN ITEMS UIT

VAE
VK
India
VS
Japan

Klantenservice

Over Ons

Klantondersteuning

Onze Andere Merken:Hewyn|Selfship

Reviews

R**R

Minwax: the best, easiest polyurethane on the market

being Minwax excellent product, price below many other sellers. multiple sizes to fit the size of your project. easy to apply and faultless even for the first time user.

3.01.2026

B**N

I Came. I Saw. I Sealed

Bought this polyurethane to seal a wooden table. Now that table is glossier than my forehead in July. Application was smooth — unlike my dance moves, which ironically caused me to step in the wet finish. Now one foot is permanently weather-resistant. My neighbor asked what the shine was. I said, “Polyurethane.” He said, “Is that a new cologne?” I told him, “Only if you’re into the scent of craftsmanship and questionable life choices.” Dries faster than my humor at Thanksgiving dinner. Solid, durable, and more protective than my mother-in-law. Would I buy it again? Absolutely. Would I recommend it to a friend? Already did. His coffee table now reflects so much light it’s legally considered a lighthouse.

21.07.2025

R**.

Take your time. Do you like an instruction to tell you you would love to finish when it’s all done.

It really works really good. Easy to put on. Very beautiful. Looks really nice when it’s all done thank you.

21.11.2025

H**7

Product work great a better price and I could get near my home

Good product at a good price

31.01.2026

W**I

Good poly

Good poly but it does turn yellowish tint after a while. I will keep using it but on nothing white. Great for stained wood.

17.11.2025

J**N

Hard smooth finish

I’ve tried other brands even water based but keep coming back to this one

20.01.2026

F**N

Easy to work with

Leaves a great finish dries fast.

19.01.2026

X**X

excellent quality

Minwax is excellent.

31.01.2026

M**R

attention à bien lire les descriptifs, car le volume de produit est faible.

20.05.2020

J**O

While in Europe and in Romania Borma Wachs is the norm for this type of poly, the Minwax is a calss above in my opinion by the finished glare it has even for the mat. The Gloss is exactly this glossy. I used to put 2-3 slim layers of Borma Wachs as it has UV protection which Minwax lack, then a layer of Gloss and a layer of Satin. beautiful UV resistant finish.

4.02.2022

ASIN	B000C010J8
Batteries Included?	No
Batteries Required?	No
Best Sellers Rank	#52,782 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #58 in Household Polyurethanes, Shellac & Varnish
Color	Gloss
Coverage	12 sq ft/quart
Customer Reviews	4.7 4.7 out of 5 stars (690)
Date First Available	July 19, 2004
Finish	Gloss
Global Trade Identification Number	00027426630000
Included Components	Minwax - 27426630000
Is Discontinued By Manufacturer	No
Item Form	Liquid
Item Package Quantity	1
Item Weight	1.95 pounds
Item model number	63000444
Liquid Volume	32 Fluid Ounces
Manufacturer	Paint Sundries Solutions
Number Of Pieces	1
Part Number	63000444
Pattern	Polyurethane Protective
Product Dimensions	4.25 x 4.25 x 4.89 inches
Size	Quart
Style	Gloss
UPC	027426630000
Volume	1 Liters
Warranty Description	Warranty

Minwax 63000 Fast Drying Polyurethane Clear Gloss, Quart

Details

Beschrijving

Specificaties

Reviews

Veelgestelde Vragen