Leather Hole Puncher Hand Punching Machine Heavy Duty Manual Press Puncher Punch Tools for DIY Leather Craft Punching Holes with 1.5-13mm Clamping Chuck

I get clean precise, even stamps with this tool, I make custom knife sheaths for the blades I forge and I am regretting not buying one of these years ago. I had zero issues setting the tool up, getting even stamps, or adjusting the height of the chuck. It even grips hard enough that I could use square leather lacing punches to get the sheaths stitched together. 10/10 especially for the price.

I've used it couple times to make stamps on the belt and it broke up. The screw didn't prevent of main part pushing out. very sad, I wish I could return it

This thing it STURDY. I think it weighs more than my desk. If I could, I'd mark it down half a star because the grip of the horizontal arm to the vertical shaft is too tight. There are instructions to jam a screwdriver in there and loosen it, but even with that it's very hard to adjust vertically. Given the choice between rounding up and rounding down, I chose to round up. It's a minor inconvenience (especially since it won't be adjusted very often). Once I got it set in place, it was absolutely perfect. The chuck is solid and well made and came in a separate box within the main package along with the chuck key. There is a threaded shaft that the chuck screws on to that then fits in a machined hole in the piston and is held in place with a set screw. It has a very low-tech but serviceable depth adjustment (just a pair of inverted machine screws) that you can adjust to alter the "throw" of the piston. There are pre-drilled mounting holes, but I haven't found a need to mount it (did I mention that it's HEAVY - that's a plus in this regard). I've been making a custom leather purse for a beloved aunt who had been supportive of me through a rough time and this thing has sped up the punching by a factor of at least 10 times. I've got some rivets to set as well, and the rivet setters will fit in the chuck easily enough - with the addition of a small (4"x4"x1/8") metal plate I can use this as a rivet setter as well. I got the plate for the asking from a local sheet metal shop (although I'm gonna take them a batch of chili tomorrow). I can't speak to its utility in a professional setting, but you won't go wrong with this thing as a hobbyist.

This press is great, especially for its price point, but you are sort of getting what you paid for here. It is NOT perfectly straight, at least the one that I got. As such, there is a high point on all of the things I stamp thanks to the stamping face being just slightly off. Nothing I can't fix and it might not be the worst thing that ever happened, but it does bring the overall rating for this down a bit for me. Otherwise, I am very happy with this!

Suuuuuuuper buena. Excekente calidad, exactamente como anunciado. Recomendado 200%.

This is rough. Thankfully it wasn’t too pricey. It’s made of very poor cast iron that has chips and cracks right out of the box (so bad I’m nervous to overtighten any of the bolts and adjustment screws). I know it was inexpensive and I don’t expect it to last more than a few years. I tested it. It’s going to be better used as a stamp press than an hole punch press, which I’m ok with. It was caked in grease so clean well. The adjustment screws are a pain, so if you need to constantly adjust the height, or switch from pressing to punching, that will not be an efficient process. So I plan to just use it as a stamp press. I will update my review if anything changes.

I purchased this machine based mostly on price because I have a very limited budget for my new leather crafting hobby. I read all the reviews and was prepared to have my husband tinker with it and make sure everything was adjusted as it should be. He is a curious being and always wants to know how things work and why they do what they do so I figured this would be perfect for him to figure out based on the poor reviews about a few parts of this machine. I had low expectations to begin with, I basically wanted something to use with my hole punches that was easier on the hands and quieter on the ears. Once we figured it all out, this has been perfect. I am even able to put my snap setters and rivet setting into the chuck and use this to set snaps and rivets which I must admit, greatly added to my enjoyment using this machine because I sucked setting them by just hammering the snot out of them! Yes, there are things you must figure out about adjusting the raising and lowering of the shaft thing, but once you do, well, it pretty much does exactly what it is supposed to. If you are not good at figuring things out like that, then go with one of the other items that are more expensive, you do get what you pay for. Overall, I am quite satisfied, but budget did not take a big hit and I was able to purchase some other supplies that I needed for my new hobby. I hope this review helps those of you on the fence about this item.

I purchased this new and what I got looks used and missing 2 bolts. The press where you attach the drill chuck also does not line up with the hole on the plate. It’s too far back. It functions well with modifications, however when you purchase something new you expect new and all the parts to be there. It will get the job done for what I need, but I will never purchase again nor would I recommend this particular one or seller to anyone. In the end you get what you pay for I suppose.

おら、愛知の三河から東京の高円寺に来てはや40年の還暦パンクロッカーです。とはいえ、最近、カントリーパンクにハマっておりますのん。必須アイテムのレザー小物の作製に菱目キリを使いますが、隣りの部屋のZARAとかGUファッションのユルイカップルと騒音問題でバトっておりますのん。金槌の音やオラのギターが夜素敵に響くとのこと。このままでは事件になりますのん。で、Amazonアウトレットで安く購入。びっくりするほど、汚い状態で届きましたが、工作機械は日常品とは違うもんね。工夫や手入れをすればかなり使いやすいです。菱目うちの時は手製の高さガイドと柔らかい桐の板を敷いて使っておりますのん。アウトレット品なので、塗装は小学生レベルですね。なんでそこ塗る？ってレベルかな。プレゼントなら正規品をおすすめしますのん。で、心配な夜も安心して、今夜も革小物を作りますのん。とはいえいつか、隣りの彼氏の方を、高円寺の公園によんで、お話しますのん。あはは。

4

不満点は2点で塗装が指でこすると特徴的な緑色が手につく。ギア部に塗られているグリスが真っ黒で本体内部錆びていることです。 レバーを引いた感覚もジョリジョリしています。 なんとかしようと分解してパーツクリーナーで洗浄しましたが返品すれば良かったことに気がついてこのレビューを書きました。

30 x 350mm spine round metal bar is actually hollow and is banding backwards if a reasonable pressure is applied on the handle. The press is not heavy duty in any shape or form, very poorly constructed with rusty drive toothed handle core. Mine came in with paint splatter all over the base and spine with a lot of rust, so I had to clean and sand it all. It will cost me another $70-$90 to get a solid steel or steinless steel round bar replacement in order to make this press slightly more heavy duty. Small base needs to be fixed if you want to have a smooth pressing leverage. All in all it may be good for small, light jobs, but not good enough for pressing studs, rivets or snap buttons in leather.

包装バラして商品見たら いつの時代の物?!ってくらいサビと油汚れが結構ヒドイ。 でも洗浄とサビ転換塗料でどうにかなる。 自分でアルミフレーム等で自作しようと思ってたけど 費用的にこの商品と変わらないぐらいだったので こちらを購入。 自作のよりは重量もあって安定性はいいと思う。 バケツの中に熱いお湯と洗剤を入れて洗ってたけど 最後捨てる時にボルトも一緒に捨ててしまったので ボルト－2本です。