PHILIPS WiZ 10W B22 Wi-Fi & Bluetooth LED Smart Bulb with Music Sync, Compatible with Amazon Alexa & Google Assistant, 16 Million Colours & Motion Sensing Technology | Pack of 1

I have used Wipro and Helea LED bulbs. Apart from those I have also seen a few other brands in action. However, nothing beats Philips in terms of actually calling this a "smart" product.For starters, this operates like a normal bulb, by default. There's no WiFi pairing or anything until you turn it off-on three times. It turns on as a normal bulb and with every subsequent off-on immediately, changes between warm and cool. This is already a plus point over other brands that have default mode as WiFi pairing and keep blinking until you set ut up. Of course, you'd say there's no issue after you have set it up right? That's where you are wrong and where my second point comes in.You see almost all other bulbs that I have used, you have to keep the light switch on. You can turn off the bulb via IoT, but in order for it to turn on, WiFi must be connected, therefore power must be on. If someone switches it off (like when you are leaving the room you switch everything off), it loses the WiFi connection. These other bulbs lose their settings and forget everything after a few hours. If you switch it on after even a couple of hours, they start blinking and won't stop blinking until you set them up again. Frankly speaking I was feeling more dumb than "smart" with those products around.This Philips bulb does not forget the settings. I have tested for 8+ hours with switch off, and almost within a minute of turning it on again, the bulb is WiFi connected and can be turned on via the app. It also remembers the last power state, so it will not turn on automatically after switching it on from the wall. I usually keep the switches on, but now even if someone switches them off accidentally, it's not a pain in the butt anymore.I also would like to point out how well the Wiz system integrates with evrrything else. You can setup IFTTT applets and use them to control the bulbs. I have a Samsung phone so I use smart things, and have a widget on my homescreen with 6 different scenes. I just tap on the button and it turns on or changes both the lights in my room within 2 seconds. I can control both the color temperature and brightness with those applets, it's a lifesaver to just dim the lights immediately when you wanna watch a movie while working, and vice-versa.Setup is a bit tricky if you have 5GHz WiFi, and don't have separate SSID for 2.4GHz and 5GHz. I faced this exact issue with setting up another 9W Philips Wiz bulb a while ago for someone else, and I forgot all about it and faced the same issue this time. The app just refuses to find or connect with the bulb when you are on WiFi 5GHz. I had to setup after connecting my phone to bulb WiFi AP, then use mobile data on my phone to load the app (which requires internet btw) and only setup 1 bulb at a time.Then I tried disabling 5GHz on my router temporarily, and now was able to setup both devices in the normal way. Afterwards, I enabled 5GHz and did not notice any issues with normal operations of the bulb. It seems like disabling 5GHz is the only way to easily setup the bulbs. Of course all this does not apply if you have separate 2.4GHz and 5GHz SSIDs (which you shouldn't anyway).Overall I think the device is worth extra few bucks over some cheaper other models. Brightness is decent and one 20W unit is almost equal to a full 4 feet tubelight.I can also vouch for Philips warranty replacement process which I had taken earlier on a different bulb. All I had to do was send a photo of the bulb along with the invoice to their support email, and they asked me for my shipping address and sent a new one.

There are no issues in using it, also has ample light, but at first there were some connectivity issues with app and wifi, also it doesnt have rgb light, only cool and warm, and intensity can be adjusted.

room create diferant ambience

This bulb is really fantastic.Initially it took me some time to connect through app, but it was some mistake from my side (it is connected while pulsing which I did not care). Once connected it gives fantastic colours. Works very smoothly. Philips quality is always best. Colours are reasonably accurate in actual wrt as shown in app.Those who say its not 16 million colours shld understand there are few basic colours in nature, others are different shades of basic colours. We can get many colours by moving circle slightly in custom colour option. Also there is option to remember last colour in app, by selecting that it will maintain same colour even after switching off / power failure and re switch on. Brightness is good for cool white or warm white and lower for colours which is normal with any colour led, for colours brightness is always less than cw,ww. CW & WW brightness of this bulb is same as other non colour good leds.Overall a good led bulb, worth more than its price.

Love it. I have paired this with IKEA ÅRSTIDFloor lamp, and it works great.Can be easily setup using WizV2 app both from Android or iOS. You can control this from multiple mobile as well. Can Be paired with Google Home app as well, although it doesn't have many features as compared to the native Wiz app. Couldn't pair it with Siri from iPhone so not sure if that's possible.Quite bright, but since I am usign it in a lamp, it doesn't lighten the whole room. Would require 3 lamps to properly illuminate an average sized room.App can also do many types of automation.

Its not connecting to wiz connect app.. worst experience. I spent more than 4 hours to trying to connect them. Qlso the product delivered in very poor conditions. They dont know how to transport electric goods. Here i stopped trying to get it connected. Dont purchase any smart electronics online.. better go to electric shop and purchase it by testing on the spot. Its totally worthless to spend that much money. Also has no return policy, i have replaced it but i want return.This was old reveiw. Guys if you are buying this product make sure, you are using a good router to connect with. It may cause some port issue likeConnection to MQTT server(TCP, port 8883)Connection to API server(TCP, port 443)This may cause device show offline when tubelight is on.. so get it fixed.Product is amazing no doubts.. its schedule on off makes me forget to switch the keys.. amazing product.

Good but it makes a noise in white cool light mode. Warm light is ok, the other one makes a noise. I am keeping it because I need the warm light. There is flickering, but I thinks it's little lesser. It has tilt option but it could have been better if i could point it to the cealing for better light dispersing than direct pointing down. Installation is ok, little tricky as it keeps rotating. Just an ok light, fine for my use case which is warm yellow light.