BLACKHAWK SERPA Quick Disconnect Kit (2 Female/1 Male)

So, I ordered two of these sets for my taser. They were kind of hassle on the first set because you need to have the correct screw for the correct adapter otherwise it’s just spin (they all look the same but if your spins try a different screw until you find the right one). I wasted like 3 hours on this until I figured out that little nugget… then it took about 5 minutes to assemble the second set. I ordered two because I have two external carriers (one brown and one black) and also the belt attachment. I put a female adapter on both vest carriers, my belt teklok, and my backpack (molle). I have put one male adapter on my Blackhawk taser holster, and the second male adapter is currently not being used. This has made swapping carriers and/or where I carry my taser a breeze. Swapping carriers is always a hassle and this just makes like so easy. Well worth the money! No more dinking around with moving the molle panels and/or removing the holster from it to put on my belt. I plan to order a set for my firearm and attach one to my nightstand and one to my car (separate holster than my duty holster). It’s my favorite Blackhawk accessory because it’s so versatile and makes life so easy! Oh, PS, super easy to go from straight draw to canted draw.. just adjust where you place the male adapter before securing it into the female adapter.

If you have a belt holster and want to use the BH Molle adapter, then this is the thing to get for those swaps between belt and, say, external pack. A very handy thing to have and allows for shifting of arms between preset pieces (belt position, shoulder position, MOLLE, etc.) for each that you have. Fast and intuitive to use with a press in and slight turn to lock in place and then a press down on tabs to remove. The included screw fasteners are difficult to insert by hand. I utilized a brass drift punch (flat surface punch) with a surface larger than the screw hole to push the receiving end of the fasteners into place. This was done by hand as the punch was basically used to do what my fingers couldn't to get some pressure on them to get them into the holes. I also had some worries about the fact that on one of the holes the receiving fastener or female end, was turning slightly and not allowing for a tight and secure mating. To alleviate that I utilized #8 lock washers, which proved to be so useful I backed out all the fasteners and used them on the male fastener or screw side to give a firm seating of the fasteners. The lock washer pushes against the head of the screw, thus putting friction on the threads and allowing for a tight mating that then has internal tension to keep things in place. Wavy washers could also work for this. Overall if you are going for BH equipment and need to move weapons around between positions, then you really can't live without this. What I wish was available was something to allow the use of other manufacturer's equipment via a round mating panel that would then insert into the male side of the rig. I've got a TDL holster that is just a little bit off on the hole pattern and a perforated kydex adapter would work like a charm to allow for cross-manufacturer swapping for those specialized pieces that BH just doesn't make.

It may appear to be somewhat bulky at first glance but I see it as a plus. It not only serves to allow you to quickly switch from one platform to another but it's size (with, approximately 1/2 inch) serves as a spacer to place the holster further away from your body. This comes in handy when you are using Body Armor. It comes with all the hardware needed and the fasteners are of very good quality. Installs in about 10 minutes (both male and female sides) with just a phillips screwdriver. I highly recommend it!

This is a love-hate relationship. I love the concept, the way these puppies are made, and the versatility. They hold rock solid and I can adjust the draw angle to the ridiculous. There are enough mounting holes for any conceivable notion you might have. I even put one (male gizmo) on a large hunting knife scabbard and it works mostly fantastic. Here's the hate part: The extra spacing from all this good stuff makes the gun stick out from your bod a lot, and then droop down a bit. If mounted on the hip, try not to swing your arms in a manly fashion--you'll break something. Better yet, rest your shooting arm elbow on the gun butt. Then people won't notice your modified manly walk. Trying to carry concealed can cause some serious thought about covering garments to use. A maternity smock comes to mind, but there goes what's left of your manly walk and demeanor. To sum it all up: If you don't mind looking like a sackful of hammers, this is a great gizmo to have. If you want close and cozy, this is not a real good idea.

excellent product

Works great !!! Thank you !!!

Perfect for work

I redid my CCW holster with this attachment and I love it. Its so much easy to take off and put on instead of having to take off the whole configuration when you want to sit back and relax. And when I need to get up and go it just reattaches back on. I love it!

Top de chez top. Systeme fagile et rapide a mettre en oeuvre. Sa forme ronde permet d orienter l objet fixé sur la plateforme QDS dans toute les positions souhaitees. Par ailleurs on le fixe par pression et on l enleve en appuyant sur deux petits boutons. Je recommande. Cela permet d eviter de se balader tout le temps avec l etui taser par exemple

レッグホルスターやmolle装備に取り付けて、ワンタッチで組み替えが出来るのが良いです。 自分はレッグホルスター、molleベストに取り付けて装備毎にハンドガンを付け替えています。

Pretty solid kit. Having two female parts rather than two male parts is beneficial. It's good being able to not have an empty holster sitting on my chest when I'm not carrying. The mechanism doesn't allow for much fine tuning of the angle of the holster but luckily one of the set angles works for me. I can reach and draw much faster with this than with a belt holster, particularly with a molle tac vest.

プレキャリやチェストリグ、ベルトやレッグパネルなど付ける気になれば色んな所に付けられるブラックホークのホルスターですが、複数のスタイルで遊んでる人は、前回はプレキャリとレッグパネル、今回はチェストリグにベルト、と組み合わせが変わる事があると思います。 そんな時に面倒なのが装備の移動です。 モールに付けたのを外し、また付け直す・・・以外と面倒な作業です。 付ける位置が変われば角度も変えなくてはいけません。 そうなるとプラットホーム間の移動の他に更にネジを外し角度を再度調整しなければいけなくなり、後日プラットホームや取り付け位置が変われば同じことの繰り返し。 複数のスタイル、ハンドガンの種類で遊ぶ限り避けられない問題ですが、これを使うことによって以降の手間を減らす事ができます。 一度クイックディスコネクトを付けてしまえば以降は道具いらずでベルトやモールの行き来ができますし、角度を調整することも容易にできます。 使用するホルスターが増えても、オスアダプターを追加購入すればホルスターの交換もすぐできます。 フィールドで複数のハンドガンを使い分けたい時、銃を変える度にドライバーを取り出してネジをしめ直す必要がなくなります。 どっちがオスでどっちがメスかわからなくなる方がいるようですが・・・ 移動する側（ホルスター）がオス 装着する側（プラットホーム）がメスです。 よってこのセット内容はホルスター1個を2つのプラットホーム間で付け替える為のものです。 1匹のオス（攻め）が2匹のメス（受け）に出し入れすると覚えてね（殴 世間ではオスが受けでメスが攻めだったりオスとオス、メスとメスの場合もあるかもしれませんが今は忘れて 使うホルスターが増えたらオス 使うプラットホームが増えたらメス を追加購入してください。 おらぁ、お前もバリエーション沼に嵌まるんだよぉ！

▪️Switch between holsters and platforms quick and easy, solid it doesn’t wobble. ▪️Pushes your holster out 5/8” more from mounting directly on platform. This is closer to where your arm naturally falls so I think this is positive. ▪️Mount the male fitting (thing that looks like an AR bolt face) to your holsters. ▪️ Mount the female fitting to belt mounted platforms, molle system or even screw it to a wall. (I have seen them mounted into vehicles and under desks.) ▪️ Share the same platform between various types of pistols or holsters for light bearing holster. ▪️ Rotate holster on platforms easily requires two hands but is surprisingly easy.