Moen 141025 Replacement Part O-Ring Kit

I installed a new Moen kitchen faucet and replaced the restrictor with this and now I have all kinds of water pressure.

I initially purchased a Moen faucet a few years ago and ran into a problem with the pull out wand. The company sent me a new pull out wand as there was a manufacture issue with the old wand. The problem was the new wand had a screen in it that really limited the water flow. After a year or two of frustration with the limited water flow I decided to see what I could do to get the water flow back to what it was. To my surprise, our government, at it finest, decided that they need to help us be more environmentally friendly and they put new standards in place to limit water flow from faucets, which is why the newer replacement wand had less water flow than the original wand.After further research I found this part that I could use to replace the screen wand and increase the water flow back to what I originally had, prior to the new government regulations coming into affect. This new screen is great and gave me back the higher water flow I originally had. I couldn't be happier.

We moved into a new house a little over a year ago. It has a Moen Faucet model 7185SRS. We were soon frustrated with the VERY low flow from this faucet. Recently we noticed that you can get a replacement screen washer kit with a higher flow. Quick and easy to put this one in (less than 2 minutes) and I needed no tools, but you may need a wrench.I did a test with the old washer kit and the new washer kit. I got 1.36 gpm on cold water with the old washer kit. I then got 1.76 gpm with the new kit. This was an increase of 29%. This did not seem like a lot, but it puts out enough to keep me happy.BEFORE YOU BUY- Check on Moen's web site to see if this one will fit your model or call their customer service and they will be willing to help.

i am not a fan of the moen pull out faucet. it came with a low flow aerator like most faucets sold today. now it rinses better and fills buckets faster. it also makes the sprayer turbocharged and even messier. there was some debris in my original part so i wouldn't recommend making bigger holes. downrated for value for money. these tiny pieces of rubber and plastic cost as much as 20 grams of pure silver. but at least my kitchen sink doesn't seem like a motel faucet now.

Although way over-priced, the fitting was easily replaced to increase flow rate to a usable level in my new Moen pull-out faucet. I tried to order from Moen but had multiple website failures.

work excellent

Perfect fit. Replaced O-Ring when I replaced the pullout hose. Less than 10 minutes to install.

This white screen 2.0gpm part allows normal water flow by replacing the original black 1.5gpm included in faucet. Turn off water lines and unscrew the wand from spout. Remove the gasket O-ring then pop out the black 1.5gpm part. Pop-in the new white part and O-ring, then mount & turn-on water lines. Now get 25% more water flow! Took about 5 minutes to convert. The black 1.5gpm screen is visibly more narrow with only half the holes so no wonder water flow was so low. I ordered this part using a free-30day trial of Amazon prime so I paid No Shipping! This part wasn't available to buy at any brick and mortar store near me.