Orzly Screen Protector for Nintendo Switch Lite 2019 Model [4 Pack] Tempered Glass Screen Protectors. No Bubbles Easy Installation Anti Scratch Edition

I rarely write reviews but this product warrants my time since it is excellent. After reading about the problems some people were experiencing with the Switch when taking it in and out of the dock - I decided that I really did not want to scratch the screen of my own. Especially with portable consoles such as the Switch, I personally try to take care with avoiding any scratches or marks on the screen, witch for me are perceived as distracting from the experience at hand. The Orzly Screen Protector for the Switch is, honestly, a no-brainer. It is easy to apply (Orzly has an excellent tutorial on Youtube), very durable, fairly thin, but most importantly really oozes quality. With the screen protector on, the whole Switch looks more luxurious and really the way it should come from factory. I could see no air bubbles (at all), and the screen protector is nicely cut to more or less fit the switch perfectly (I do think it's a perfect fit but it's rather hard to get it absolutely perfectly aligned). However, despite making sure that I was in a clean, dust-free environment (a steamy bathroom is a good place because the dust particles in the air are weighed down by the steam) when I applied my first screen protector, I managed to trap one small dust particle. It really shouldn't have bothered me too much since it was tiny, but I did decide the following day to remove the screen protector and try again with the second one provided. I learned from my previous mistakes and didn't trap any dust the second time around, and the Switch is now utterly flawless. Really happy with Orzly providing two protectors in the package. It allows you to try again should you not be happy with your first attempt. I would advise others to really (really) be careful when applying the protector so as to not trap dust as I did on my first go. Use the "hinge" method as shown in the Youtube tutorial and minimise the time from which you remove the coating on the back of the protector to when you let it attach to the screen. Use strong lights and look at the surface reflection on the screen before you attach the protector and it should come out perfect. I would really recommend this product.

So glad I got these! I take my Switch with me everywhere, but the screen of the device being open like this makes it quite vulnerable (as does sliding it in and out of the dock). I don't normally like screen protectors, but the glass ones are actually really good, as they physically stop the screen from getting smashed in, so this is exactly what this device needed! Fortunately I had bought some of these tempered glass types from these people before for my phone a coupe of years back, so I'm glad that they actually make them for the Switch! I've tried a few by various different people in the past, some were good, some not so good. But the Orzly ones always go on really easily, and I like the fact that with theirs you can't even tell that it even has a screen protector on. It actually looks like the device's natural screen rather than being an obvious eyesore that some of them can be. They've also made putting them on really simple. You simply wipe the screen first with the special alcohol wipe that comes with it (which stops any dust from getting trapped under it before it sticks). Then you line up the glass protector held in place by a sticky tab, so that it's perfectly aligned before peeling off the self adhesive back. Then once it's perfectly in place, you just peel that back off and rest it down on the screen of your Switch, and the self adhesive does its magic instantly. (you literally can watch it working itself out from center to edge in a matter of seconds, which looks kinda cool). It's sort of a darker color before it sticks, and goes an instant full transparent that looks just like the natural screen the moment it's stuck down. The fact that these glass types are perfectly flat, they're much less prone to bubbles than the regular kind of screen protectors, so most of it sticks by itself almost completely on first touch except for around the edges. So then you just take the squeegee that came in the pack and simply swipe it from center to edge, and all bits stick down perfectly, leaving you with the whole thing looking exactly as the Nintendo Switch looked before you put the screen protector on. The screen sensitivity is as perfect afterwards as beforehand, and you can take them off afterwards without leaving any marks if you ever need to replace them. I'm glad they give you two of these in the pack just in case you make a mistake, but it went on perfect first time, so fortunately I was able to use the second one for the other switch that I bought for my daughter, and that went on perfectly too. So I'm very very pleased with this. and I'm now alot happier about bring it with me knowing that my screen won't get damaged. While I bought a travel case for it anyway for bringing it out and about, I'd still say these toughened glass types of screen protectors are worth using aswell, as putting it in and out of the dock each day means that it's prone to getting scraped when doing that if the screen happens to knock against the inner walls of the switch dock, so these proved to be by far the safest way of making sure my Switch stays intact.

I've used Orzly protectors for every Switch console I've ever had, and the Switch 2 is no exception. The protectors are so easy to apply, very high quality, and the fact you get four in a pack makes it so you'll never run out. Bubbles aren't an issue, the included microfiber cloth makes it easy to remove dust, and the protector protects your screen without impacting touch sensitivity.

This seems good quality. It arrived with all the kit you need to install in well - screen wipes, dust removers, sticky tabs etc. Simple to install and adhered to the screen well. Fits and aligns as well as you would expect, and doesn't seem to make any negative differences to the screen quality. There's not much more to say - it works as you would expect it to.

This is a must have quality product, it is so good that Nintendo should include it pre-applied to your screen out of the box. The dock included with the Switch is notoriously known to scratch your screen, so a product such as this is essential. Also, if you take your Switch out, or leave it laying next to random objects, you're prone to scratching the screen on your expensive device, so you'll need some protection. Crucially, this doesn't distort the image or the colours in the slightest, whilst at the same time it gives your screen protection from scratches, and most importantly gives you great peace of mind. With it being a glass protector, it's very easy to clean. It doesn't cause any light to bounce back, with it being applied, it's just as good as a normal display, in fact you hardly notice it's there after a while. A couple of pointers and tips to apply that I wish I had known when doing my first application: 1) Use in a dust free environment. Ensure you're in a place where there is little to no dust, as even the smallest of specs can get under your protector and cause bubbles or be an eye sore, especially on white backgrounds. Being next to blinds with dust on them, isn't the most appropriate place! 2) Dust is often flowing around in the air, if it settles on your screen use a compressed air can or dust blower, as they can greatly help in removing those specs. Do not use a cloth for removing those dust specs, it will likely add more dust specs elsewhere. Do not also use the dust remover stickers that come with product, the adhesive is far too strong and may cause damage to your screen. 3) Use in a room where this is plenty of light. Shine your screen under the light to ensure you haven't overlooked any areas that may require cleaning. You can also turn on your Switch and view a screen with a white background which will help identify any areas that need your attention. 4) Use the provided alcohol wipe to remove any oils, fingerprints or residue on your display. You want is spotless! Better yet, if you've just purchased a Switch, take it out and apply the protector straight away as your screen will come pristine out of the box. 5) Once you are happy with your display being clean, gently apply the protector gradually across the screen. This is very important, if you find that you misaligned it or discovered some dust specs, take your time and slowly roll it back. However, if you apply it all at once and discover some dust specs, you risk damaging the protector as you will need to claw it back from one of the corners, which can lead to the protective film layer on the protector coming off. I discovered this the hard way. If even the smallest layer of the film comes off, it will create a bubble that you will not be able to get rid of. Other type of bubbles are ok, they will press out once you have fully applied the protector.This is a sturdy protector that you can easily roll back without ruining it, so take your time and apply slowly and gradually with care. Overall it is a reasonably well priced product, and I wouldn't risk buying the cheaper variants to save a few quid. After all, you have an expensive product in the Switch which mandates a premium protector.

I'd been looking for a good screen protector but most of the recommendations on various online forums were for US-based suppliers. I came across some UK-based recommendations for Orzly and thought I'd take a punt. Judging from some of the other reviews, the supplier had issues with keeping up with demand for the product and therefore some buyers received their goods late. I was lucky and didn't have such problems - item came within the specified time frame, but your mileage may vary. The inclusion of alcohol wipe and cloth was a nice touch as it meant the screen could be prepped for the protectors. I don't recall seeing any dust stickers in my box and therefore didn't use them. I found that the alcohol wipe and cloth were more than sufficient to remove all the dirt and dust that was on my screen so it wouldn't do any harm to avoid those. Installation was quick and easy - I aligned the protector to the bottom vents / gaps on the switch and then just let it "flop" down to the top of the screen, pushing any air bubbles in an up and out direction. After installing, there were no additional bubbles other than on the right outer edges of the screen, which disappeared as soon as I gave them a rub (again, in an outward direction from the centre of the screen). I'm not sure how easy removal will be but I'm not too concerned about that at this point. The protector does leave the screen shinier than the original plastic screen, but I'm happy to live with this if it means that my kit is well protected! Touch screen ability doesn't appear to have been compromised and cleaning the protector is a breeze. For under £9 (at the time of writing), it can't be beat. Off the back of my positive experience, I purchased the Orzly protective case. Would happily recommend this product to anyone looking to buy a good screen protector for their Nintendo Switch.

Brilliant. I normally use Spigen but they wanted £25 for 2 while these are 4 for £12 currently. These don't come with the plastic thing to place, but you can just put a placement sticker at either end and given the Switch 2 is rectangle, flat and has huge bezels, these are easily placed manually. First one went on first time with no bubbles, just give the device a good clean beforehand. And the trick, as always, is to do this in a steamy bathroom which keeps dust out the air and settling again; and to put the protector on quickly when you have decided to 'go' and removed the film.

This is hands down, the best screen protector that you can buy for your Nintendo Switch. I previously got the amFilm tempered glass protector and it was absolute rubbish. The Orzly is so easy to install and doesn't leave bubbles or fray at the edges either. It's so high quality that it actually looks like part of the Switch itself and don't worry about the dock - it fits perfectly. It's transparency is so opaque, you get 100% accuracy of the screen and the colours actually look more vibrant thanks to the glass. This is a high quality product and you get two in one pack. APPLICATION: Have a hot shower in the bathroom and then apply it in the bathtub. Using this method guarantees no dust will get under the screen and you'll get a totally clean flush install - the humidity helps a lot. Why do you think they strip down in a crack house? Clothes carry dust. I tried installing the Orzly elsewhere, but before doing so, I noticed that the Nintendo Switch screen is a dust magnet - I cleaned it, only to have more dust magically reappear! The bathroom method was a success. Another Amazon reviewer suggested this method, very wise indeed. Don't use masking tape, just line it up perfectly and use the stickers that come with it. My masking tape left a sticky residue which took forever to clean. ONE NEGATIVE: It doesn't fit flush with the screen and you'll get gaps on the edges, so line it up carefully. SCRATCH RESISTANCE & DURABILITY: I've had it installed for a while now and heat doesn't seem to affect it. Also there's no scratches on it and it's so easy to clean with literally no effort. Apparently Blunty (YouTuber) took a knife to it and nothing happened. I wouldn't do that, but rest assured, it's definitely durable and an absolute necessity to protect your fragile easy-to-scratch Nintendo Switch screen. Unfortunately the dock still scuffs the back of my Switch. DON'T LOOK, DON'T THINK, JUST BUY IT!!! YOU'LL BE 100% SATISFIED.