3DLAC 3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

I started using 3DLAC for my ASA and TPU prints, and it’s been flawless. No more warped corners or failed prints—the parts stay locked down from start to finish. I just spray a little more where I’ve removed parts and keep printing, only giving the build plate a good cleaning every ten prints or so. It’s simple, reliable, and saves a ton of time and wasted material. I do wish the nozzle had a finer mist for a bit more control, but that’s minor compared to how well it works. Overall, this is a great find—high quality, dependable, and well worth the money for the print quality it delivers.

This stuff is actually amazing. I thought I was just terrible at 3d printing. It was so hard to get things to finish. I would tweak the setting on everything. Bed temp hi, low different filaments but never tried another glue since I thought they were all the same, whoops. Since this stuff was delivered I have printed endlessly and haven't had a single break from the plate. I love the spray instead of the roll on. The spray amount is perfect and covers the plate with one swoop. It just works. My 3d printer has come alive again and my son is really stoked.

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal. If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

Absolutely love this product. I was using glue sticks for better bed adhesion but had to wash my plates after a few prints to avoid too much build up and would leave the prints sticky. This creates great adhesion without a sticky residue. When you let the prints cool a bit before removing they come off super easily. If they cool completely they practically slide off. Also love the fact I can spray a light coat on the build plate, let it dry for a minute or two and start a print up.

The absolute best for every filament i have thrown at it. Even improves bed adhesion for ASA-CF a bit. Won't be buying anything else, i'm now a lifetime customer.

Love it. fast, easier than glue. So far no prints detached after +50 times used. I don't always wash plate between uses and no detachments. Strong odor for a few seconds, need to let plate cool once done, otherwise hard to get piece off. havent burned through a bottle yet despite +50 prints including tall and thin prints.

This stuff is fantastic on a textured PEI plate - the standard plates on both my Anycubic Kobras and my Bambu H2D. It is a little less effective on the smooth patterned plate with the holographic effect, but that's okay really. I use a different formula for those that works quite well. It does not leave a sticky residue on the plate, although sometimes afterwards I can feel it a little on the print. It easily cleans up with warm water or rubbing alcohol. I've used it with PLA, PETG, PA-CF (nylon carbon fiber), ABS, and ASA, all with success. the latter three were in the closed environment of the H2D. I will probably purchase it again when the bottle is gone, but it is lasting a long time. Does not really need to be applied every single time, maybe every other or third print. I also don't wash it off each time either and it hasn't really built up or anything.

bought this from a recommendation in a facebook group I'm in and i tell you this I havent had any adhesion issues since i started using it this stuff is awesome and will always be at the ready for my prints.

„Top Haftung für 3D-Drucke – einfach, zuverlässig und sauber“ Der 3DLAC Sprühkleber hat sich für mein 3D-Druckbett als absolut zuverlässig erwiesen. Das Auftragen ist unkompliziert: kurz schütteln, dünn aufsprühen – fertig. Die Druckobjekte haften sofort sicher, auch bei größeren Prints, und das lästige Warping an den Kanten tritt deutlich seltener auf. Ein großer Vorteil ist, dass sich die Modelle nach dem Abkühlen problemlos wieder vom Druckbett lösen lassen. Es bleiben keine Rückstände zurück, sodass keine aufwendige Reinigung nötig ist. Auch die Ergiebigkeit überzeugt: Mit 400 ml kommt man bei normalem Gebrauch lange aus. Ich habe den Kleber sowohl mit PLA als auch mit PETG getestet, und in beiden Fällen war die Haftung perfekt. Das Spray verteilt sich gleichmäßig und bildet keinen klebrigen Film. Pro: 1. Sehr gute Haftung bei verschiedenen Filamenten. 2. Einfache Anwendung ohne großen Aufwand. 3. Modelle lassen sich nach dem Abkühlen leicht lösen. 4. Keine Rückstände, schnelle Reinigung. 5. Große Dose, lange ergiebig. Contra: Bisher keine Nachteile festgestellt. Fazit: Wer ein zuverlässiges Haftmittel für 3D-Drucke sucht, ist mit 3DLAC bestens beraten. Es spart Zeit, verhindert Warping und sorgt für saubere Druckergebnisse. Klare Kaufempfehlung.

Très bon produit. Je n'ai plus de soucis d'adhérence avec mes impressions, surtout celle avec une base plus large et fine comme le Hueforge.

3DLac, que decir de esta laca para evitar warping en la impresión 3d, y tener primeras capas bien hechas. Yo que tengo bandeja PEI Texturizada ya que dice en una esquina que use pegamento. Y con uno en spray, gastas poco, dura mucho, y tiene muy buenos resultados. Y si te lo venden en packs baraatos, BBB

Tutto ok

Envoie rapide